Question about Epson Stylus C43SX InkJet Printer

1 Answer

Epson c43sx does not print

When i turn on my epson stylus c43sx, the red light will also turn on and the head moves to the left. after pushing the paper/ink button, the head will just move either to the left or right and the red light does not turn off, it's always on. because of this my printer does not print.what should i do? what's wrong with my printer?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Epson Master
  • 691 Answers

It is possible that the ink cartridges in your printer (especially applicable if you are using refilled or compatible carts) can not be read by the printer. Some compatible cartridges have a failure rate as high as 30% and so it is very possible that the machine either does not see the cartridges or can not read them.

Replace the cartridges with genuine Epson ones and try again. The genuine ink will also help to clear any hardening cheap ink in the print head.

Posted on Apr 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to clean print head when color in is low?


You need something like this
http://www.fixyourownprinter.com/kits/epson/K70

May 12, 2010 | Epson Stylus C43SX InkJet Printer

1 Answer

How to change cartridges epson stylus sx 400


From older Epsons: If the ink cartridges are empty (red light on), hold the ink switch 3 seconds to move the print head to the left. If they are not empty, hold paper switch until print head moves left. Once you remove a cartridge you can't reuse it, even if there's ink in it according to Epson.

Nov 16, 2009 | Epson Stylus C86 InkJet Printer

1 Answer

Green & red light is blinking


If you try to print and it say "end of service life ........thing" . You have to reset the printer counter to 0 count.

Use a third party software for this, key in in your web search bar " epson reset software" the upper most link is the one, try to read the procedure.

Hope you get it easily.

May 25, 2009 | Epson Stylus C43SX InkJet Printer

1 Answer

C43sx both lights on


ok...start by removing the drivers from control panel, go to website and get new drivers, install them, try it again.

http://tinyurl.com/6qcpgy

Jun 11, 2008 | Epson Stylus C43SX InkJet Printer

1 Answer

Head cleaning does'nt doing


hmmm..ok..unplug from computer

turn off for 5 min

replug in power ONLY no computer cable

try a test print from front panel buttons

http://tinyurl.com/6qcpgy

Apr 21, 2008 | Epson Stylus C43SX InkJet Printer

1 Answer

Red light is always on


See my answer to your similar question:

t is possible that the ink cartridges in your printer (especially applicable if you are using refilled or compatible carts) can not be read by the printer. Some compatible cartridges have a failure rate as high as 30% and so it is very possible that the machine either does not see the cartridges or can not read them.

Replace the cartridges with genuine Epson ones and try again. The genuine ink will also help to clear any hardening cheap ink in the print head.

Apr 02, 2008 | Epson Stylus C43SX InkJet Printer

3 Answers

Epson c43sx does not print


change the cartridge thats simple red light indicating you must change your catridge

Apr 02, 2008 | Epson Stylus C43SX InkJet Printer

4 Answers

C43sx both lights on


If your PC is connecting to it normally (no connection errors), it sounds like you printer is having the service reset hardware problem. Try installing the EPSON reset software and check all counters and error codes.

Try this one which fixed mine:

http://www.ssclg.com/epsone.shtml

Good luck...

Nov 15, 2007 | Epson Stylus C43SX InkJet Printer

Not finding what you are looking for?
Epson Stylus C43SX InkJet Printer Logo

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...