Question about Sunpentown 11 in. SR-1330 Electric Cooktop
Something inside is short-circuited. All components look fine thans to burned fuse. Don't try it anymore with new fuses. You need to get a repairman to check it out.
Posted on Apr 09, 2008
Tips for a great answer:
Sep 16, 2016 | Miele Cooktops
Nov 19, 2014 | Cooktops
Nov 15, 2014 | Whirlpool GCI3061XB 30" Induction Cooktop...
May 31, 2014 | KitchenAid Kitchen Aid 30 In. Black...
Jan 02, 2014 | Gaggenau Cooktops
Hello - Typically error code E on Electrolux induction cook top indicates an error with the user interface board/control board. Contact a professional to move forward accurately and properly diagnose/repair the unit.
Oct 30, 2012 | Electrolux ICON Designer Series E36IC80ISS...
When you used all elements the power supply wire have been
gone to the maximum current absorbed so to the maximum heat. When the cook top
is new it can withstand this heat but due to long time used now you have burned
out wires and probably to junction point. So now the power supply wire is
burned and is open circuit thus not any power to the heater. The wires have
just open circuit and they don't touch each other or the metal body of the cook
top that is why you don't have the circuit breaker fuse to trip off. So now you
need to disassemble the cook top and you will very easily find the burn point
which should be melded and burned black and replace all parts that they have
been burned with new one.
Here is the link where you find the parts layout, the wiring
diagram and also order any parts you might need.
Also just for safety, avoid to use all four heater at the
same time in the future.
Dec 18, 2010 | Maytag MEC5430BDS Electric Cooktop
Jan 14, 2009 | Jenn-Air Cooktops
Oct 08, 2008 | Jenn-Air 34 in. Expressions CVGX2423 Gas...
472 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: