Question about Logitech Precision Xbox Cordless Video Game Controller - 963321-0215 (9633210215)

1 Answer

Logirech preision for ps3

D/mode lcd light keeps blinking

Posted by on

1 Answer

Ce faci printeso

Posted on Jun 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My PS3 is going fast and slow. I don't know what to do. It keeps making clicking noises and I don't know how to fix it. HELP ME!!!


Its ur internet someone is usin it so tell them to wait until ur done.[hope it works for you!]

Feb 18, 2013 | PC Game Controllers

1 Answer

If i press the ps button on dualshock 3 controller all four lights on it are supposed to flash but it doesn't therefore the ps3 system cannot be turned on using it


Have you charged it? If you have plugged it in and no lights blink you may have a defective controller. If so check with Sony support/

Oct 05, 2012 | Sony Ps3 Sixaxis Wireless Dual Shock...

1 Answer

GT3-R -can


This is a dual frequency transmitter. (315/390) You need to select one button to program the TYPE 1 frequency of 390 MHz. Here's how:

Backwards compatable programming instructions for GT3-R dual-band remote: This is a 3 button remote, which can be used to operate up to 3 garage doors using IntelliCode radio controls. This remote is defaulted to operate the new IntelliCode 2 Genie garage door openers, but you can also program individual buttons to operate other IntelliCode 1 (pre 2011) models of Genie garage door openers made from 1998 to present. To change a button to operate a pre 2011 IntelliCode opener, the default IntelliCode 2 setting must be changed to IntelliCode 1. An LED light on the remote displays which mode the remote button is in: Red = IntelliCode 1 / Green = IntelliCode 2 To set one of the 3 buttons to be IntelliCode 1 (red), follow the instructions below:
  1. Select a button on the remote that has not been programmed.
  2. Press and hold that button for 10 seconds. Both Red and Green LEDs come on and stay on.
  3. Press the same button twice to toggle IntelliCode selection from IntelliCode 2 to IntelliCode 1.
  4. Press the same button again to confirm toggle. the LED should be Red. The IntelliCode selection for this button is set to IntelliCode 1.
You are now ready to program the remote to your garage door. Follow accompanying instructions for "Programming to IntelliCode 1 Genie garage door opener," or see below instructions: Programming Instructions: Gently press the Receiver Learn Code button on the power head receiver of your Genie garage door opener (motor head on ceiling in garage). This small, black, unmarked button is located behind the light lens at the motor head and is nearest the floppy 6 inch antenna wire that protrudes from the motor head. When pressed, a radio signal indicator light will start blinking red for 30 seconds. After pressing the Learn Code Button, press your transmitter button twice for your system to grab the frequency and code it in. (Keep the transmitter you're tuning at least 2 feet away from the power head while tuning.) Press the transmitter button once more to test the system and start your door moving.

Jan 06, 2012 | PC Game Controllers

1 Answer

Cant start my ps3 it just flash green then yellow and then red all time? what can the problem be?


It is most likely a heat problem. Keep the PS3 in a well ventilated area and remove any dust from the vents. If it still does not work and its under warranty contact Sony here at http://us.playstation.com/support/ask/. If the warranty is gone you try this tips or sell it "as is" http://ezinearticles.com/?How-to-Fix-PS3-Red-Light-Blinking?-Step-by-Step-Effective-Guides-to-Fix-The-Red-Light-of-Death!&id=3654490.

May 05, 2011 | PC Game Controllers

1 Answer

I cant get my madcatz ps3 controller to turn on. i just purchased it and threw out the intructions by mistake. I plugged in the usb key and get the controller to turn on


If it is wireless you have to either insert some batteries or charge it by USB.

Usually MadCatz controllers have a button to turn them on or just keep the Home button pressed until you see some light on it.

The USB dongle should be blinking and after you turn on the controller it should pair with it and stop blinking.

Hope it helps...

Apr 18, 2011 | Mad Catz XBOX CONTROLLER-MADCATZ MICROCON

1 Answer

Xbox wireless controller lights keeps blinking but


If the ring of light keeps blinking, it means that the remote controller was not connected to a receiver which is the XBox 360 console. Try to press the connect button on the console and the wireless controller to sync them together.

Apr 27, 2010 | Microsoft Xbox 360 Controller

1 Answer

Logitech Cordless Rumblepad 2 red light off next to mode button


Hi ! I suggest you to install the software including drivers + profiler here: http://www.logitech.com/en-us/486/2965?WT.z_sp=Image
Then you can download pre-defined profile for your game here: http://www.wingmanteam.com/profiles/profiles_users.htm
Thanks and have a nice day ! J -

Feb 14, 2010 | Logitech (9633260403) Game Pad

1 Answer

How do i setup the g25 to my ps3


i have a g25 wheel on my ps3 it is simply plug and play.
if you struggle with buttons check this out it has all the functions:
Buttons for the G25 wheel and PS3

Top 4 The Black ones
Top-triangle-cancel-reverse(gear to back car up)
Left-square-cancel
Right-circle-E_brake
Bottom-X-enter You can also use the gas pedal for enter

Bottom 4 buttons The Red ones
Far left-no function
Second button-Change view
Third button-Pause-quick exit replay at the end of race-This button will also speed up the winnings (to keep from waiting with the cup spinning around so you can get back to racing)
Fourth button-best race line for license test

Buttons on wheel

Left-look back (default)
Right-nitro (default)
I change these two buttons around myself so I have the nitro on the left.

D-pad-same as the controller up,down,left,right. For menue use.
Also for (during race)
Look back-bottom pad
Look left-left pad
Look right-right pad

To change any of the button functions use the DFP settings in the options menue.
I have not used the wheel in photo mode. The only thing you can't do with the wheel is "exit" game. I also never have my controller on during gameplay I only turn it on to exit the game. If anyone needs anymore help with this wheel give me a shout-back and I'll try my best to help.
One last thing make sure your wheel is in the far left port(port 1) or port 3

Oct 08, 2009 | Logitech G25 Wheel And Pedals Set

1 Answer

Changes batteries and button blinks green light and wont' connect


clikc ont he button on ur xbox that looks like a bunch of arrows then turn on ur controller....this should solve it, if not e-mail me at silenthunder101@yahoo.com

Jan 11, 2009 | Microsoft Xbox 360 Controller

Not finding what you are looking for?
Logitech Precision Xbox Cordless Video Game Controller - 963321-0215 (9633210215) Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech PC Game Controllers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

Are you a Logitech PC Game Controller Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...