Question about HP OfficeJet 6310 All-in-One Printer (Printer/Scanner/Copier/Fax) w/USB Printer Cable , Retail

4 Answers

Printer power reset

When i turn on the printer said error "Reset power"

Posted by on

  • 4 more comments 
  • Anonymous Apr 03, 2008

    hp-oj 6310 m/c error reset power

  • Anonymous May 29, 2008

    On HP OfficeJet 6310 All-in-One Printer, Power reset button and all lights flashing, including camera icon. Everything is hooked up through surge suppressor. Worked perfectly for almost a year.
    Does not respond to turning off and on or reinserting cartridges. Please advise.
    email: grouchop@hotmail.com


  • umasms Jul 28, 2008

    On HP OfficeJet 6310 All-in-One Printer, Power reset button and all lights flashing, including camera icon. Everything is hooked up through surge suppressor. Worked perfectly for almost a 1 1/2 year.
    Does not respond to turning off and on or reinserting cartridges. Please advise. umasms@yahoo.com

  • rae7 Aug 01, 2008

    power reset button-where the heck is this button?????

    I have turned off, unplugged, restarted, then the power reset buttom lights up again????HELP

  • Anonymous Oct 31, 2008

    I have same problem!!!!!!!

  • Anonymous Mar 08, 2009

    when I turn on the printer it tells me to reset power, and I don't know hwo

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a problem. fax ate paper. Can't get it out

Posted on Nov 14, 2008

Replace the AC Adapter, this happen whe the resistor #20E is damaged and the output D350 is intermitent (when it gets hot fail), so just replace the AC Adapter is like $32 box

Jesus S Echartea

Posted on May 16, 2008

Gimana cara reset printer f380

Posted on Apr 30, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 141 Answers

4 Suggested Answers

  • 93 Answers

SOURCE: Reset Power Error 0xd05d010d

First power cycle the printer and then reset the printer.

Posted on May 27, 2008

  • 1 Answer

SOURCE: Hp 6310 printer gives error reading

Thanks for your e mail Fixya.com suggesting I join your premier plan at a cost to me where you would be happy to solve the problem at a cost. and asking me to let you know how I fixed it if I managed to fix it myself

Obviously one does not get anything for nothing and, as I'd need to pay for your plan to get the solution I guess with that same outlook you'd need to pay for my knowledge to know how I fixed it
c'est la vie

Posted on Jul 12, 2008

jonniewalker
  • 1029 Answers

SOURCE: HP 6310 Reset Power error

if you are using any surge proctector to connect the printer to power source remove and connect directly.reinsert the catridges properly and unplug the printer from all source of power supply.wait for some minutes then power back,try it twice again if the problem persists unplug the power cable from the printer when the printer is powered on

  • wait for some seconds then power back

Posted on Dec 22, 2009

pineworks
  • 4041 Answers

SOURCE: how can i clear the error 0"xd05d010d reset power"

Reset the product:

  1. Without turning off the product, disconnect the USB cable from the rear of the product.
  2. Remove the cartridges from the product.
  3. Wait for the 'Insert Cartridges ' message to display on the control panel.
  4. Disconnect the power cord from the back of the product.
  5. Wait 60 seconds.
  6. Reconnect the power cord. If the product does not automatically turn on, press the Power button (c01602202.gif ).
  7. Reinsert the cartridges, and then close any open doors on the product.
  8. If you receive a prompt to print a calibration page, do so.
  9. Reconnect the USB cable to the rear of the product, and then try printing again.

Posted on Jan 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code c4801 For C284e


You may have main board issues. Maybe Try error code reset.
Open front door and locate main power switch on the bottom left and turn off.
Press and hold the reset button , button on control panel.
Turn main power switch back on whilst pressing reset.
after 1 - 2 min a white screen with 1 button saying"error code reset will appear , let goo of reset button.
Press error code reset and then turn main power switch of for 20 seconds. turn main power switch.
If code returns contact me on my phone to discuss

Sep 02, 2014 | Konica Minolta bizhub Printers & Copiers

2 Answers

Error 5200 of canon pixma mx328. i already tried turning it on and off several times and even got the cartridges and returned them back but still when i tried to print a page error 5200 still...


Error no 5200 is caused by its temperature high.. to solve your problem follow the instruction given below::

1. Turn Off printer, cable power still plug in.

2. Press Stop/Reset button, don't release the button.

3. Press Power button by holding without release and than release Stop/Reset Button.

4. Press Stop/Reset button two times (2x) now release the Power Button.

5. Wait until service mode to zero (0).

6. Turn off the Printer, cable power still plug in.

7. Press Stop/Reset button, don't release it.

8. Press Power button don't release & than release Stop/Release button.

9. Press Stop/Reset button four times (4x), wait until service mode to "1"

10. Turn off printer, and loose cable power, wait for one (1) minute.

11. Connect cable power, turn on printer again, now this printer ready to use.

Aug 23, 2011 | Canon MX300 Office All-In-One Printer

1 Answer

My cannon scanner MP240 is getting an error E5 please help to find out the solution


Error ink cartridges are not installed properly (Error E5)
First power off the printer. Next, while holding STOP/RESET button, power on the printer.
While holding POWER button, release STOP/RESET button. Then push STOP/RESET button twice.
Wait about 20-30 second until the LED shows "0?. Then push STOP/RESET button four times.
Finally push POWER button twice. Last step is to turn off the printer by pressing the POWER button one last time.

Jul 07, 2011 | Canon PIXMA MP240 All-In-One InkJet...

4 Answers

Canon MP145 error E27


  1. plug off power cable
  2. press and hold stop/reset button
  3. plug on power cable
  4. press and hold power button(still hold stop/reset buttn)
  5. still hod power button, loose stop/reset button
  6. press stop/reset 2X then loose power button, wait until 0 displayed
  7. press stop/reset 1X
  8. press power button 1X, printer will print 1 time
  9. press stop/reset 2X
  10. press power button 1X,printer will print 1 time
  11. press stop/reset button 3X
  12. press power button 1X ( no print proses)
  13. press stop/reset 4X
  14. press power button longer than before for turn off printer, if print not turn off plug off power cable
  15. turn on printer and error 27 will disappear
i hope this helpfull
thanks for using fixya

Jan 25, 2011 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

I have a conon pixma mp198 error 27


ink absorber is full is canon error code E27. Try doing this steps to help you fix this problem.

Unplug the power cord then Press and hold down the Stop / Reset. After that Insert the power cable
and Press and hold down the power button (the button Stop / Reset fixed in press), When pressing the Power button, then release the button Stop / Reset. Press the Stop / Reset 2 times then release the Power button."Wait until the digit 0 appears in the display"
> Push down the Stop / Reset 1 time.
> Push down the Power button 1 time, the printer will print a sheet of paper.
> Press the Stop / Reset 2 times.
> Press the Power button 1 time, the printer will mecetak a sheet of paper
> Press the Stop / Reset 3 times.
> Press the Power button 1 time. (No printing)
> Press the Stop / Reset 4 times
> Press the Power button 1 time rather long and loose (to turn off the printers).
"If the printer still can not get turned off, unplug the printer power."
> Turn on the printer.
> E27 error message is gone & the printer is running normally.

Nov 15, 2010 | Canon PIXMA MP190 All-In-One InkJet...

1 Answer

Error code E27, ink absorber is full. Call service.


Follow these steps :
1. Unplug the power cord
2. Press and hold down the Stop / Reset.
3. Insert the power cable
4. Press and hold down the power button (the button Stop / Reset fixed in press)
5. When pressing the Power button, then release the button Stop / Reset.
6. Press the Stop / Reset 2 times then release the Power button.
"Wait until the digit 0 appears in the display"
7. Press the Stop / Reset 1 time.
8. Press the Power button 1 time, the printer will print a sheet of paper.
9. Press the Stop / Reset 2 times.
10. Press the Power button 1 time, the printer will mecetak a sheet of paper
11. Press the Stop / Reset 3 times.
12. Press the Power button 1 time. (No printing)
13. Press the Stop / Reset 4 times
14. Press the Power button 1 time rather long and loose (to turn off the printers).
"If the printer still can not get turned off, unplug the printer power."
15. Turn on the printer.
16. E27 error message is gone & the printer is running normally.

Oct 29, 2010 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Officejet 5610 All-In-One InkJet Printer: error 0xd0620130 reset power...


Hi,

Please try the below resetting steps

Power Drain:

  • Turn OFF the printer, disconnect the power cable from backside of the printer and from wall outlet.
  • Press and hold the Power button for 60 seconds.
  • Connect the cable and turn ON the printer.

Partial Reset

  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "3" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.

Semi-Full reset


  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "6" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.

NVM Reset

  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "OK" and "Cancel" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.


Regards,
Rizwan

May 07, 2010 | HP Officejet 5610 All-In-One InkJet...

2 Answers

Conon mp160 e5 error


Canon printers MP 160 AND MAYBE OTHERS

A) E5, E6 or E4 - it is cartridges error - to fix press the "stop\reset" button for 5-7 sec. and then release
it.

B) E27 - it is code for reset absorber (EEPROM reset or Waste
ink counter reset) and follow the described below
procedure:

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Turn off the printer.( it must be turn off)
then turn it on again.


Only in B) case you can enter into "service mode", in A) case or if have e.g. paper jam, or another error you CAN'T enter
the "service mode"
Try it

Anonymous see A) case: E5, E6 or E4 - it is cartridges error - to fix press the "stop\reset" button for 5-7 sec. and then release
it.

Apr 26, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Printer error


Step 1: Reset the printer
CAUTION: Do NOT perform any other type of reset on the printer before the ink initialization process has been completed.
Without turning the power off, remove the power cord from the back of the printer and from the wall socket.
Wait 30 seconds and reconnect the power cord to the printer and to the wall socket. Turn the unit on if it is not already turned on.
Check the printer for the error message. If the error message still displays, go to the next step.

Step 2: Semi full reset
1. Unplug the power cable from printer when the printer is powered on.
2. Press and hold # and 6 while plugging in the power cord.

Apr 22, 2010 | HP Officejet 5610 All-In-One InkJet...

5 Answers

How to reset error code E000 on IR2000


E000: Fuser did not heat up. check Fuser lamp, check thermistor, check thermostat, if this parts ok try to reset the trouble code. to reset fuser errors, first shut power off and turn on again. Then, go to service mode. Select "User mode" by pressing additional function ( * ) key then Press "ID" key ( # ) on user mode screen. Select menu 7 using cursor key. Press "OK" key. Select 4 item with cursor key. Press "OK" key. Printer reset. YES=( * ) to clear fuser error code E000.

Jul 11, 2008 | Canon Printers & Copiers

Not finding what you are looking for?
Printers & Copiers Logo

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...