Question about Maytag Performa PAV3200

2 Answers

Performa PAVT910Aww will not spin all the water out of the cloths

Posted by on

  • motheroffore Feb 06, 2009

    My performa PAVT910Aww does not spin out all the water. Very frustrating!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1. I assume all the water is out of the tub. If that is true the pump is ok.
2. Check the belt since this is a common "replacement" item.
3. Also watch the spin cycle by opening the door and manually actuating the door switch.
(keep your hands out).
a. The pump will pump all the water out of the tub before beginning to spin the tub.
b. Watch the time of spin also.
4. Remember a big load of towels will hold a lot of water.

Posted on Jan 26, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,122 Answers

CHECK YOUR WATER PUMP FOR A CLOG,LET ME KNOW-MIKE

Posted on Oct 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What year is Performa washer model PAVT910AWW


Please check this with the dealer or from the website.
Magtag performa

Jan 21, 2013 | Maytag Washing Machines

1 Answer

Maytag performa washer grinding noise


Sounds like the water pump is going out on it. The part runs about $80 and should only take about 45 minutes to install.

Jun 25, 2009 | Maytag Performa PAV3200

1 Answer

Washer wont agitate or spin


Sounds like your transmission is going bad. usually they will pop the belt when going out. Probably with a service call and the cost of the transmission, you'd do better heading to sears. Sorry to bear the bad news. Good luck.

Apr 21, 2009 | Maytag Performa PAV3200

1 Answer

My pavt910aww is full of water and has no power it seems???


You most likely have a bad lid switch.
Check the switch with a volt/ohm meter set for continuity.
No reading on the meter is a bad switch.

Feb 25, 2009 | Maytag Performa PAV3200

2 Answers

Spins fine, but clothes still soaking wet


Clogged water pump. Not draing fast enough. If this is helpful, please post as such.

Feb 21, 2009 | Maytag Performa PAV2200

1 Answer

Wash mach. will not agetate only hums


MOTOR LOCKUP?REMOVE FRONT PANEL AND CHECK MOTOR WATER PUMP,TRANS,LET ME KNOW-MIKE

Oct 11, 2008 | Maytag Performa PAV3200

1 Answer

Maytag Performa washer Waterlevel/agitator problem


CHECK your stand pipe hasn't fell over (the one the drain hose goes to when emptying)If not,Either the pressure switch is broke or there is a hole or split in the pressure switch rubber hose.This switch stops the water when it reaches required level.

Aug 15, 2007 | Maytag Performa PAV2200

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...