- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The owner's manual should be available online. Any good juice recipe book will work with this juicer. I've found amazing recipes online and especially at countless Nutritional/ Vegan websites.This type of juicer is a "juice extractor", meaning it doesn't completely liquify all of the pulp like the new Ninja does. Look for recipes that work for a juice extractor.
Try the juicer on another circuit to see if the breaker failed altogether on the circuit you were using. It's possible that the machine is drawing more power than it should and may need to be checked by an appliance service dealer. An electrician can also check the power draw at the breaker to see if it is being overloaded. If the machine itself is defective, it should receive professional service. Good luck!
I just bought the same one and although I broke it, the cone just came off easily for me. I just pulled it off and there were no clips or anything. It goes in the middle of the top plastic part where all the leftover remnants go. I used a tooth brush to clean it and that worked pretty good. Any chance you may have the book so you could tell me whether I have a burned out belt? I was overenthusiastic about what I was trying to juice and it was too dry. thanks!
This is what manual doesn't tell you: clean the 3 spring loaded pins on the side of the motor clutch. Sugar and pulp may get inside and seize them when dries up, thus making very hard to separate the basket/cutter from the clutch.
Hey, you probably have figured it out! I just got a juicer without a manual and couldn't find a way to dismantle for cleaning but I got it!!!!!!!!! Just put it upside down and twist and turn. Everything will fall off ( cutter and container). I'm so happy to help!!