Question about Onkyo TX-SR605 Receiver

1 Answer

HD problems It is a True HD disc yes - "Cars" which came free with the machine. Any other suggestions?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 97 Answers

A couple. Check to make sure your "in disc" audio is set to True HD (not multi). This while disc is playing.
Player /receiver wise make sure Direct Digital is set to "on". Also make sure your receiver is ready to go so that the HDMI handshake occurs with the receiver on the right "channel". That can also be forced to handshake by switching modes then switching back.
Make sure your using a 2.0 HDMI cable.
Good luck.

Posted on Apr 02, 2008

  • Paul Cernech Apr 02, 2008

    Rereading, I hope I didnt make that too confusing. I would suspect the sync issue first. just make sure your in digital mode (button on front next to display) before your spin up the disc...

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cd carriage does not always load cd properly


Yes,as rightly suggested,dirts can cause the optical lens to reject some CDs.Use a a CD cleaner to clean the optical lens.If the problem persist,then you will need a qualified service personel to replace the lens.

Apr 07, 2014 | Bose Awrc1g Wave Radio Cd Player Only -...

1 Answer

I have a PS3 hooked up via HDMI to my Yamaha RX-V465.When I play a blueray disc the signal info shows PCM.Shouldn't it show Dolby Digital or True HD?


Your PS3 probably has a setting for what digital bitstream it produces. Check it out. Dolby Digital is probably what you want.

Dec 27, 2009 | Yamaha Rx-v465/rxv465 Home Theater...

2 Answers

I have my 80 gb PS3 hooked up to my STR-DH800. I


You may need to enter the setup menu on the PS3 and enable the decoding for blu-ray discs.

Dec 13, 2009 | Sony STR-DH800

1 Answer

Not showing DTS MASTEr OR DG True HD


In the menu is an option for switching master and true hd on. Standard its of and played als normal dts/dolby.

also: check the input (blu ray?): maybe it is set to only output no high def signals, so the amlifier doest recieve hd sound..

Igor

Dec 14, 2008 | Audio & Video Receivers

1 Answer

No output of hd audio


Change audio settings on PS3 to PCM not bitstream

Jul 26, 2008 | Denon AVR 3808Ci Receiver

1 Answer

Onkyo TX-SR605 7.1 Channels... Problem


firmware up date go to onkyo homepage

Apr 01, 2008 | Onkyo TX-SR605 Receiver

1 Answer

True HD - biggest secret


Are you playing a TrueHD format disc? Just like DTS 5.1 or any other format if your disc isnt coded in TRUEHD then your not going to get it. DTS or other formats cannot be "converted" to TrueHD like the video portion of a standard def disc. At this point there arent alot of TrueHD discs out but be paitent, this may change. Or not, due to the fact there are other "lossless" formats that may be more widely adopted. Sort of like DTS and THX were when DVD first came out. Hope this helps.

Mar 31, 2008 | Onkyo TX-SR605 Receiver

2 Answers

HDMI SOUND


True HD can only work with HDMI interface and is only available on some newer HD DVDs. Check the DVD to see if the True HD encoding is available.

Feb 11, 2008 | Onkyo TX-SR605 Receiver

Not finding what you are looking for?
Onkyo TX-SR605 Receiver Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio & Video Receivers Experts

D. E. Hev

Level 3 Expert

1059 Answers

gbob59

Level 3 Expert

2963 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you an Onkyo Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...