Question about Symbol LS2208 Handheld

Open Question

Help! They just keep dying on me!

I have fried 3 (!) brand new barcode scanners in the past 3 months. I am using them with a Compaq Presario C714NR notebook. I take it out of the box, plug it into the USB port, place it in its holder and scan barcodes. For 2 weeks or so it works perfectly, then it suddenly fails. The red light is dim and intermittent and it just dies. What could I possibly be doing wrong???
Thanks
jeannette_bair@hotmail.com

Posted by on

6 Suggested Answers

  • 25 Answers

SOURCE: Barcode scanner scans and beeps, but will not put the numbers in the computer

There is more than one way for that imager to send data to the computer. Are you using USB, serial, or is there a little box that goes between your existing keyboard and the PC that accepts the scanner connector?

Posted on Jan 05, 2008

  • 25 Answers

SOURCE: Symbol LS 4278 Barcode Scanner - 3 Clicks

Does it beep each time you pull the trigger while the beem is on the barcode?

Posted on Jan 23, 2008

SOURCE: How can enable Barcode Scanner ??

You have to use a program which will activate the scanner.

You can use DataWedge, which will send the scanner input to whatever has focus: https://docs.symbol.com/KanisaPlatform/Publishing/968/KB100417_f.html

Posted on Oct 07, 2008

thesuperdude
  • 97 Answers

SOURCE: Types of Barcode that can be scanned using Symbol MC9090

It can read all standard symbologies apart from PDF symbologies unless it is equipped with an imager scan engine.

Posted on Mar 26, 2009

  • 597 Answers

SOURCE: No PS/2 Ports on new PC only USB ports. Need to make work with USB connectivity.

I have a P/S 2 port to USB adapter that I got with a microsoft natural keyboard once. So I know they make them. Here are a few you can get.

http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&Description=ps2+adapter

Posted on Jun 02, 2009

  • 23 Answers

SOURCE: {TAB} after I scan barcodes??

I just had to do this today... took me a while, but I figured it out. Download the manual from here:

http://www.modul-bio.com/media/Symbol_LS2208_Manual.pdf

Scan the following barcodes in order and it will add a tab to the end of the barcode you scan.


Scan "Scan Options" Pg 13-6
Scan "<Data><Suffix>" Pg 13-7
Scan "Scan Suffix>" Pg 13-5
Scan "7" Pg Appendix D-3
Scan "0" Pg Appendix D-1
Scan "0" Pg Appendix D-1
Scan "9" Pg Appendix D-4
Scan "Enter" Pg 13-8


You should now have a tab at the end of any barcodes you scan. Hope this helps!

Posted on Mar 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am using compaq presario M2000 with AMD mobile technology. But I don't have its sound driver. Please help me to download the driver for the above mentioned notebook


You need to find out what brand and model of sound card it is and then you can download one from their site not all of the same computers have the same equipment in them it days on the box or in the settings of the computer

Jul 12, 2011 | Barcode Scanners

2 Answers

I WANT TO DOWN LOAD THE MOTHER BOARD DRIVES FOR COMPAQ PRESARIO MODEL 7540


Visit the link http://www8.hp.com/in/en/support-drivers.html to download the latest drivers.



Regards,
Muhaim

Jun 17, 2011 | Barcode Scanners

1 Answer

What this sign mean caps lock light is flashing on off ,screen blank hp compaq presario cq61 please tell what I do


Find link below list of errors

http://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/Compaq-Presario-CQ-61-black-screen-freeze/td-p/555015

May 07, 2011 | Barcode Scanners

1 Answer

How do I install ram memory for compaq presario sr1617?


1st ensure that the RAM that you buy is compatible with the motherboard (DDR1, DDR2,)...or SDRAM etc...check compaq site with the specific model for the compatibility accessoris....
also
watch video on youtube....
http://www.youtube.com/watch?v=SiFIgSQOY7g

Jan 24, 2011 | Barcode Scanners

1 Answer

MC9090 won't read any barcodes - brand new device right out of the box. The RFID scanner works fine with Gen 2 tags.


What software are you using to connect to the scanner? If you custom wrote your own software, you will need to download the SDK for the software to interface to the scanner. If you are using a COTS, you can download Datawedge from the Motorola support website. This is a MID software that converts the barcodes into keystrokes. So when your cursor is in a field and you can, the data from the barcode goes into the field.

If this is a new handheld, contact Motorla, you have a year of support, use it. They will be glad to help.

Nov 05, 2010 | Symbol MC9090 Barcode Scanner

1 Answer

I need to get more ram. can't seem to find my product # sr1920nx. can you tell me what is compatible to that


Here is what you asked for from memorystock.com

Presario SR1920NX Memory Specifications Standard Memory 512 MB (removable) Maximum Memory 4.0 GB Memory Expansion 4 sockets Memory Comments PC3200 DDR SDRAM DIMMs. Supports Dual Channel DDR. CPU Type 2.2GHz AMD Athlon 64 3500+ Model Comments GeForce 6150 LE ChipsetI recommend Crucial brand memory. Hope this helps:)




Aug 22, 2010 | Barcode Scanners

1 Answer

Ring scanner Beeps


Yes...you have a communication error. Contact Socket Support http://www.socketmobile.com/support/

Cheers...

Billy Barcode

Jul 28, 2009 | Socket Communications Cordless Ring...

Not finding what you are looking for?
Symbol LS2208 Handheld Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol Barcode Scanners Experts

Brian Friend

Level 2 Expert

132 Answers

ka4iup
ka4iup

Level 3 Expert

3941 Answers

Ngoro
Ngoro

Level 3 Expert

1111 Answers

Are you a Symbol Barcode Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...