Question about Abit KT7A-RAID Motherboard

1 Answer

Unable to find Mass Storage Controller Driver

Hey,

I am unable to find a suitable Mass Storage Controller Driver for my notebook (Compaq nx6110).

Please help...



found new hardware, SCSI and RAID controller, then can't find the driver for the Mass Storage Controller??

Posted by on

  • dodjame Aug 22, 2008

    cant find mass storage controller on my neo-Qnote laptop

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Hi koolkeef, your KT7A-RAID uses the KT133A chipset. You can find drivers for that chipset located at VIA's web site.

http://www.viaarena.com/default.aspx?PageID=2&OSID=1

http://www.viaarena.com/default.aspx?PageID=2

Happy hunting & good luck!

Mike

Posted on Apr 02, 2008

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just installed new hard drive on my system and i need mass storage controller drivers, other pci bridge device,pci device ,multimedia scsiraid controller audio device driver, sm bus controller unkno


You can download the device drivers from ASUS WEB site. Select your model motherboard/computer/laptop, and make sure you select drivers that matches your Windows operating system. Please click on this link to their WEB support site : - http://support.asus.com/download/download.aspx?SLanguage=en-us

Feb 10, 2013 | ASUS M2N32-SLI Deluxe/Wireless Edition ATX...

1 Answer

No usb 2.0


click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers


if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem


check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts


if you need more help with this post a reply


hope this helps

if you dont have a disk with the drivers

you will need to download one try one of these

http://download.cnet.com/usb2-0-driver-zip/3000-18493_4-163914.html


http://download.cnet.com/usb-2-0-root/3000-18493_4-55793.html


http://download.cnet.com/usb-mass-storage-controller/3000-18493_4-161651.html USB Mass Storage Controller

http://download.cnet.com/via-usb-2-0/3000-2098_4-10163319.html

Install a USB 2.0 host controller driver
http://download.cnet.com/usb-mass-storage-controller/3000-18493_4-161651.html

hope this helps

Jun 20, 2012 | EPoX EP-8K9A Motherboard

1 Answer

Unable to get ethernet controller drivers


Go to the Toshiba web site support page. Haven't personally been there but I assume you should reply to a few questions about your equipment model, serial number, etc, before it leads you to the download page. Once found, download the driver, save to your disk for a possible future reoccurrance, and run the install.
Good luck!

Aug 16, 2009 | Abit IC7 Motherboard

1 Answer

USB driver 2


Can you be more precise? You don't need USB driver for this PC...

Jun 25, 2009 | Gigabyte Motherboards

1 Answer

Mass storage controller drivers


I see that before, and I always find then in "Windows" Directory, but no remember exactly in which, something like Subdirectory "Inf" , "Prefetch" , "Inf" , or "System" one of those.

Nov 09, 2008 | Motherboards

1 Answer

Rathwynn


Hey there

The most common cause is that setup does not have the driver for a SCSI device or is detecting storage devices in the wrong order, such as that CD-ROM drive first.
Press F6 when setup first starts and provide a driver for the mass storage device that will hold the operating system files.

Check to make sure all adapters and controllers are working properly.
Check power to all devices. Reseat adapters and controllers.

For SCSI devices ensure:
1. The SCSI cabling is properly installed.
2. SCSI devices are terminated.
3. SCSI devices are correctly addressed. And
4. The BIOS correctly recognizes all SCSI adapters.
Also, be sure the SCSI boot drive is addressed as 0.

Check the manufacturer's recommedation for configuring SCSI adapter and Hard Disk Drives. Try replacing the adapter before replcing the drive(s).

For EIDE Drives:
1. Check the controller.
2. Ensure file I/O and disk access are set to standard. And
3. Ensure that the system drive is the first device recognized by the controller.

For IDE and ESDI drives:
1.Check the cabliing and controller.
2. Check the Drive setup in the BIOS for master/slave relationships. And
3. Ensure the drive is properly recognized in the BIOS.

Gimme acknowledge by rating me.

thanx

-
Romy

Aug 05, 2008 | Intel Motherboard

3 Answers

SOUND PROBLEM


i need to sound driver SN ESS 1869 FOR COMPAQ

Apr 07, 2008 | Compaq (187499-001) Motherboard

Not finding what you are looking for?
Abit KT7A-RAID Motherboard Logo

Related Topics:

880 people viewed this question

Ask a Question

Usually answered in minutes!

Top Abit Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you an Abit Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...