Question about Hitachi 60SDX88B 60" Rear Projection Television

2 Answers

Blank screen,power led on, fans running - Hitachi 60SDX88B 60" Rear Projection Television

Posted by on

  • 2 more comments 
  • Anonymous May 23, 2008

    Red led power is on but black screen and no sound

  • Anonymous Jun 11, 2008

    Blank Scree, No Sound, and power button led is on.

  • sokiboi23 Nov 20, 2008

    TV light is on..when i looked in the back on the circit the (DP06) protect light is blinking..NO picture no sound.What is problem please HELP

  • Hicapp May 04, 2009

    I have a similar problem, I have the hitachi 60SDX88B, while wathcing tv, then all of a sudden the picture went away, the screen just went black. I turned off then on the tv, and still no picture. The power button is lit when you turned on the tv. I tried pressing the menu key to see if something will appear on the screen, but still no picture, can't even see the menu on the screen. Any help is appreciated.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Hitachi 60SDX88B and the screen went blank although the red power light is still on. I turn it on and off only using the button, but no sound or picture.

Posted on Oct 10, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Hitachi Master
  • 1,779 Answers

Do you have a DLP or Plasma set????? Give me the model #.

Posted on Apr 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen goes on then goes blank...comes back on after about 10 seconds??


There are one or more bad capacitors on the circuit board inside the tv. You must replace the circuit board module. A repairman will have to replace it ..Ebay used to have repair kits where you could site the bad capacitors , remove and re-solder new ones supplied with the kit. However; you must have some basic knowledge of circuit board repair. Otherwise if it is old or second hand ...Throw it out.

Oct 14, 2014 | Sony KDF-E60A20

1 Answer

Sony KDF-E42A10 cycling on and off


the best thing to first is to replace lamp ..lamp will also cause this..this will be the cheapest route to go first..Please let me kno and I will give you more info or docs from Sony...

Dec 14, 2007 | Sony KDF42E2000 42" HDTV

1 Answer

I have a Sony KDS-R50XBR1 that has no picture. When I turn on the TV, the green Power/Standby LED light blinks for about 30 seconds, then turns red and blinks five times. The Power/Standby LED repeats...


  • Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen A2 slightly.

Jan 19, 2011 | Sony KDSR50XBR1 50" Projection HDTV

2 Answers

LEDs Blink but TV will still not come on


This appears to be a logic problem, (address missing) in which case you would need to get a schmatic diagram in order to fault find. It could also be a psu problem, excess current, (trip) short, or excess voltage which is preventing the set from turning on, monitored by the logic hence, giving you blinking LED's.

Aug 31, 2009 | Samsung HLN5065W 50" Rear Projection...

1 Answer

Ya...Ok


Good Day, egear00;
Did you try the DMD board? Other wise I'm still looking for solution.
big IRISH.

Aug 21, 2008 | Hitachi 60V500 60" Rear Projection...

2 Answers

No picture


you have the ATC311 chassis. do this proceedure and you can track down where the problem is. let me know if you need more assistance. i can also post a link where you can get the training manual at a cheap cost emailed to you if you would like a copy.
5. Apply AC power and press power button.
6. If LED turns on and then off, disconnect J11501 (Audio CBA) and press power
button again. If power LED comes on and stays on suspect Audio CBA. If LED
still flashes or does not light go to step 7.
7. Disconnect J26903 (AV IN CBA) and press power button again. If power LED
comes on and stays on suspect AV IN CBA. If LED still flashes or does not
light go to next step.
8. Disconnect J19500 (Convergence CBA) and press power button again. If
power LED comes on and stays on troubleshoot the Convergence CBA. If
LED still flashes or does not light go to next step.

9. Disconnect J14801 (Deflection CBA) and press power button again. If power
LED comes on and stays on suspect Deflection CBA. If LED still flashes or
does not light suspect DM2 module.

Jun 08, 2008 | RCA HD61LPW42 61" Rear Projection HDTV

1 Answer

JVC HD-ILA Projection TV


From the manual...

The POWER LED
and LAMP LED are
blinking
alternately.
• It may be a malfunction that the fan is locked or the temperature has increased.
The POWER LED
and LAMP LED are
blinking rapidly
simultaneously.
• The lamp may not have been installed correctly, or it may be due to a malfunction.
• The lamp door may not be closed correctly.

The LAMP LED
continues blinking
• It may be a malfunction of the internal electrical circuits

Feb 16, 2008 | Projection Televisions

1 Answer

Toshiba tp50f60


f your set all of a sudden won't come on, e.g., the screen is blank, but the LED on the under the screen next to the on/off switch keeps flashing, then there may be an internal fault on the set that needs to be reset. To force the reset, try this:
  • Unplug the set and wait a few seconds
  • Replug and see if the video returns
Whenever the set senses an internal fault through its monitoring circuitry, it essentially shuts down the set. The flashing LED provides the indication that a fault has been detected. Removing power to the set resets the monitoring circuitry. When plugged back in, the circuitry again does a check of the system. If it finds that there truly is a problem, then the set is shut down and the LED will again flash. In this case, you need to call a service tech. Most of the time, however, the unplug/replug routine is enough to get the set up and running.

Dec 04, 2007 | Projection Televisions

1 Answer

Jvc hd61z575 61in. rear projection tv won't come on


ok you have defective power supply in hotside section! maybe they have abnormal oscillation!

 

Oct 11, 2007 | JVC HD-61Z575 61" Rear Projection...

1 Answer

Blank screen no sound



Common problem. You can get a repair kit from www.magnavoxhelp.com

Jan 24, 2007 | Philips Magnavox 9P6034C 60" Rear...

Not finding what you are looking for?
Hitachi 60SDX88B 60" Rear Projection Television Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...