Question about Sharp Office Equipment & Supplies

Open Question

Manual I'm looking for an instruction manual for the Sharp RD-685 slider projector controller, can you help me out? Regards, Dan

Posted by on

2 Suggested Answers

  • 1 Answer

SOURCE: h i I am looking

Did you ever find the Paximat user manual?

I'm looking for the same


Posted on Apr 10, 2011

  • 1 Answer

SOURCE: h i I am looking

Hi guys - did you ever find the manual? Specifically, do you know how the remote is supposed to work?

Posted on Aug 09, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I have a Kodak Ektagraphic with no model listed on it at all. How can I find a replacement bulb, all I can find look wrong.

Supplied with 82V, 300W EXR lamp Projection Lamps Quartz-halogen 82 V projection lamps- Here is service manual link Several different Models all say EXR 300W As CORRECT Bulb : EXR, 300 W (35-hour lamp life at full lamp/medium-brightness) Sampling of other lamps: EXY (200 hours/less brightness) EXW (15 hours/maximum brightness) FHS (70 hours/medium brightness) Use combinations of lamp brightness, plus half- and full-lamp settings to approximate image brightness in multi-projector presentations. Lamp Tips • Projector operation on line voltages above 125 volts greatly reduces the lamp life. • Unplug the projector before changing the lamp. • Allow for unrestricted flow of air to the exhaust vent to prolong lamp life. • Gently wipe off any fingerprints with a soft cloth moistened with rubbing alcohol.

Jun 27, 2016 | Kodak ATS Ektagraphic Slide Projector

1 Answer

I'm looking for a manual for this projector.

I'm not sure what model Kodak Slide Projector you are searching for, but try Googling: Kodak "<specific model> owners manual". There are a number of sites that have owners manuals available. You can also try contacting the library of the George Eastman House in Rochester, NY. They have an extensive collection of all things Kodak. Good Luck !!

Nov 09, 2014 | Office Equipment & Supplies

1 Answer

Need manual for Kodak m110 projector

I just Googled Kodak M110 Projector Manual and got a bunch of hits, from a free U-Tube video to a manual on sale on eBay for $16. I hope this helps !! Good Luck !! Jim

Oct 23, 2013 | Office Equipment & Supplies

1 Answer

Light but no image

If you are talking about Kodak projectors.... The fan runs and the lamp does not light.... it would be because the lamp thermal fuse has "opened". The fuse is located on the back wall of the lamphouse cavity, & you can see it if you remove the lamp module and look into the cavity. The fuse is in a back (oe white) plastic mount on the inside back wall, secured by a screw that can only be accessed by removing the bottom cover of the projector. There are specific instructions in the service manual if you want to attempt this repair yourself (go to the Kodak website and search "support" for slide projectors"). Kodak no longer has parts, but you can buy them from:
I hope this helps you!

Jan 24, 2012 | Office Equipment & Supplies

1 Answer

Instructions for mr christmas motion projector Iwant to know how to change slides

1. Unplug the power cord from the power source.
2. Loosen the knob screw to its extreme open position.
3. Pull out film from the projector and replace with a new film by screwing the knob tight.
IMPORTANT: Always place the film with the silver surface face down to avoid film damage.

If you would like to have a copy of my instruction manual, please send me an email to I will send you the manual right away. Lawrence Brown

Oct 06, 2011 | Office Equipment & Supplies

1 Answer

I am trying to locate an instruction manual for a Kodak 5600 carousel slide projector. Will pay a reasonable price!

Kodak has an e-copy of the manual on their website:

I hope this helps !!

May 13, 2011 | Kodak Carousel 5600 Slide Projector

2 Answers

860 slide projector does not move carosil forward or backward and does not respond to selecting slides, but manual on projector will actuate slides but will not move carosel forward or backward. thanks

there is a small rubber link inside the projector that controls the advance this part fails in time and would cause this problem. the part is not hard to recreate but is difficult to replace.

Jan 16, 2011 | Office Equipment & Supplies

2 Answers


Well, that's a general statement. If you are looking to have the image look like a HDTV then you have the wrong impression of the projector's capabilities. At 800x600 resolution you will get a "good" but not great image especially if compared to a tube tv or plasma/lcd. If the graphics are sharp when you press the menu key then you probably do not have an issue. If, however, even the graphics are blurry, then you have to manually adjust the Grey outer focus ring on the lens. The inner ring will adjust the zoom. Hope this helps.

Feb 15, 2008 | InFocus X1A DLP Slide Projector

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts


Level 3 Expert

7993 Answers


Level 3 Expert

1362 Answers


Level 3 Expert

98771 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides