Question about Flat Panel Televisions

2 Answers

Ilo lct27ha36 No power on my ilo 27" wide-screen model lct27ha36. The lcd light is red showing the unit has power but the set will not power up. What's wrong? Thanks Ronnie

Posted by on

  • 1 more comment 
  • Anonymous Jul 28, 2008

    I have the same problem-I have to unplug the tv then plug it back in in order for it to come on.

  • rafalfigura Nov 12, 2008

    MY ILO LCT27HA36 TV won't come on, it just stays in standby mode The red led just blinks when you try to turn it on

  • mdonald2268 Nov 18, 2008

    My ilo lct27ha36 does not come on by pushing the button. I have tried unplugging the tv and plugging it back in and it still does not work.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 12 Answers

Same thing happened to my ilo. There are four capacitors that are bad on the power board. You can usually tell its bad because at the top it bulges out. Here is what you need to do. Unplug the tv, open up your ilo find the power board ( the power cord plugs into it). Then find the capacitors that are bad (they are the around things usually in blue color) and remove them by soldering the other side. On mine there where three 1000uf 16v and one 470uf 35v. Those are the ones that need replacing. I replaced them with a higher voltage rating 1000uf 35v and 470uf 50v. All you need to do is solder them back on but make sure you solder them back the right way (plus goes to plus on the board or you will be in trouble). I found the capacitors at radio shack for about 1.50 a peice. If you dont know how to solder look it up on youtube. If that does not work there might be couple more bad capacitors that need replaceing just need to find them and you can tell by a small bulging top.

Posted on Apr 14, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I cant get the volume to go louder. It's all the way up to 100 and i can barely hear it. It sounds like it's in mono and not stero mode. I've been all through the menu and i cant find anything that helps.

Posted on Feb 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 27'' Wide screen LC TV #LCT27HA36 that we have had for 2 years and it suddenly will not turn on. Light is red but when you press the standby button it blinks but does not turn green. Can you help....


Hi there! Power supply or Inverter may have failed. Ask for a quote from your local repairer and decide whether to repair or to replace. Best Wishes and Good Luck, JUS004

Aug 22, 2009 | Flat Panel Televisions

1 Answer

TV won't power up


Likely a failed fluorescent backlight or the inverter that supplies the high voltage to it. I'd like to suggest a potential source for parts or service but the earlier authorized service company was Initial Technology and their webiste is no more so the company is probably defunct. Ilo was sold only by Wal-Mart and our 32HD failed after 6 weeks and when returned after several weeks from repair, had the LCD panel damaged which didn't show up until we tried using it full screen and saw the flaw.
You may have some luck here:
Possible Ilo parts source
Otherwise, I'm afraid your friend is just another victim of a Wal-Mart junk supplier.

Aug 18, 2009 | iLO 3200 32 in. LCD Television

2 Answers

Model number LCT27HA36..will not turn on????


This TV is using a power supply MLT168A that has defective capacitors. Replacing the capacitors might fix it, but in some cases the failure is more then capacitors.
Write to jah2mil@hotmail.com if you required further assistance.

Aug 17, 2009 | iLO Flat Panel Televisions

2 Answers

ILO class action lawsuit investigation


Akai is also gone from the planet as well. Your correct that the capacitors on the power supply board are probably bad. This is the most common problem in any of the LCD tv's we have serviced. Our company located in Newton NJ does do repairs on these Ilo tv's, I'm not sure if I am close enough to you to help.

Rick
ESU

Apr 20, 2009 | Flat Panel Televisions

1 Answer

ILO 27" LCD don't start up.


check batteries in remote, does it click back into stand by when u press power button?

Dec 11, 2008 | iLO 3200 32 in. LCD Television

1 Answer

Ilo 27" lcd tv


If your LCD has a defective power supply module will cause the following symptoms:
No Display and no Sound, Then Power indicate light changes from Green to Red.

Apr 29, 2008 | iLO LCT32HA36 Television

1 Answer

Ilo-27 lcd


I CAN,T GET IT TO CHANGE CHANNELS. I DON,T HAVE THE ORIGINAL REMOTE SO I HAVE TO USE A UNIVERSAL AND IT WON,T PROGRAM.

Jan 13, 2008 | iLO 3200 32 in. LCD Television

8 Answers

ILO LCT27HA36 No Manual


I just bought a wirelss headset for my ilo Tv and there is no audio outlet on this TV. Is it called something else/or how can I hook this up.

Oct 15, 2007 | iLO LCT32HA36 Television

1 Answer

Using my universal remote to control my iLo 27" Wide-Screen LCD TV


I have a ILO 27" TV Comcast had no suggestions for programming their remote. I went thru the ENTIRE code book and finally came up with one that worked: Emerson Code #0463 for my COMCAST universal remote.

Jul 14, 2007 | iLO V27DMBX Television

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

623 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...