Question about HP iPAQ Bluetooth GPS Navigation

1 Answer

No blue light

Turn on Ipaq navigation; it can find sat.;
The blue light stays on for 1 sec when I turn it on but no longer flashes continually.
Is there a reset???
Unit bad ??

Posted by on

  • 1 more comment 
  • vicjagger Sep 06, 2008

    I also have this problem. Blue light flashes briefly when the unit is turned on, then nothing.

  • chickyboy46 Sep 18, 2008

    I'm having the same problem, i left the receiver on all day in my car, since then i'm trying to reset and fix it, any suggestion? Thanks

  • largegrape Oct 30, 2008

    I have the same problem.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I'm having the same problem for the last 2 weeks, i left my receiver in the car all day and since then it flashes once on startup and that's it, any suggestion how to reset the unit? Thanks

Posted on Sep 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote starter doesn't work when pressed


I think that you answered it yourself. Give you 1 point. The continual is the processor searching but not finding its mate. Replace the battery and repair them.

May 11, 2017 | 5101 LE 1 Way Car Remote Starter System

1 Answer

Hard reset of my hp ipaq 510 i forgot my password


s.gifs.gifHP iPAQ 500 Voice Messenger Series - Resetting the Device
Sometimes you need to reset your iPAQ if, for example, it is not responding to your pressing a button or your tapping the screen.There are two types of resets.
  • Soft Reset - A soft reset stops all running applications, but does not erase any programs or saved data.
  • Factory or Hard Reset - A factory or hard reset clears all user-installed settings, programs, and data, and restores your iPAQ to factory settings.

Performing a Soft ResetPerform a normal or soft reset to stop all running applications, to restart the iPAQ after installing a new application, or if the iPAQ locks up.CAUTION:Make sure to close all running applications before performing a soft reset, since a soft reset erases all unsaved data in such applications.Perform a soft reset using one of these two options.
  • Turn off the iPAQ by holding down the End key.c01118005.jpg1 - End Key
  • Remove the battery of your iPAQ.

Performing a Factory or Hard ResetPerform a factory or hard reset when there is a need to clear all settings, programs, and data from the RAM.CAUTION:Performing a hard reset will return the iPAQ to its default settings and it loses all information (files and settings, among others) that is not recorded in the ROM. Back up all important information or data before performing a hard reset.Follow these steps to perform a hard reset and return your iPAQ to factory settings.
  1. Turn off your iPAQ by holding down the End key.
  2. Then hold down the center of the 4-Way Navigation key and turn on the iPAQ again while continuing to do so.c01118006.jpg1 - 4-Way Navigation Key2 - End Key
  3. A confirmation screen opens asking whether you want to perform a hard reset or not. SelectYes . The iPAQ will reboot with its original factory settings.
NOTE:The applications and data present on your iPAQ before performing the hard reset can be reinstalled by synchronizing your iPAQ with a computer using ActiveSync/WMDC (Windows Mobile Device Center).NOTE:If you don't want the iPAQ playing a tune after you turn it on, create a new text document and save the document as StartUp.wav. Replace this new document with the file on your device.

Jun 20, 2012 | HP iPAQ 510 Voice Messenger Smartphone

1 Answer

Well my mom was watching tv and it just shut off so then my mom turned it back on thinking she might have hit the power button accidentally. But when she turns it on it started blinking the green light for...


The flashing light red power light should only stay while the fan cool down for about 1 minute after a power off (remember to always wait before unplugging the TV so the lamp can cool down with the fan). Does that flashing start right away after plugging back the TV after an hour of letting it without AC power.

The red light should flash no longer than 10 sec. This prepare the light to be turned on. If all is OK the green should stay (no longer flashing) and the sound and picture come on.

As for the lamp flashing, i bet it's only 1 time each 5 sec? Or do it group many rapid flash each 5 sec?

Things that can be wrong:
-the fan lamp

-the lamp is not proprely inserted (wait an hour before manipulating it to be sure it cooled down, and use glove to not put body oil on it).

-Lamps is defective and is not operating properly so you can't get to the usual on screen message that recommend to change the lamp.

Sep 02, 2010 | Panasonic PT-60LCX64 Television

1 Answer

Flashing Power light


Ur power board ic inverter is dead.
U need a new board.

Aug 19, 2009 | Toshiba 57H84 57" Rear Projection...

1 Answer

Blue light


Okay, I found a fix! Called JVC, spoke to somebody there, here it is:
1)unplug the TV completely, no wall no power strips, completely
2)wait 10 sec
3)plug TV back in and Turn it on, the light will still be doing the same thing
4)wait 30 sec
5)ON THE TV, not the remote, locate the menu, volume (-) and power button.
6)while simultaneously holding down the menu and volume (-) button, pressed the power button ONCE and continue to hold the other 2 for 10 sec.
7)on the remote control, go to menu>settings>system info
*** now this I know as a FACT will work on systems that display: JVC - ver.5.32FO001, but I don't know of any other versions***
8)press the mute button on the remote twice
9)unplugg TV again and wait 10 sec.
10) plug TV in and turn on

It SHOULD be working normally now... Thanx to the guys a JVC support for this one, I know it seems like an obvious first place to look, but sometimes it isn't. I for one checked online forums first.

Nov 27, 2008 | JVC LT-42X579 42 in. LCD TV

3 Answers

Trying to pair BT150 but it won't go into pairing mode


I had the same problem. The many instructions available don't have quite the right details. This worked for me:

1. Turn off the BT150 by holding down the answer button about 5 sec. until the blue light goes off and is not flashing.
2. Turn on the BT150 by holding down the answer button about 5 sec. until the blue light flashes.
3. Keep holding the answer button, and press and hold the volume + button for another 5 sec. until the blue light comes on solid.

Nov 12, 2008 | Jabra BT150 Wireless Headset

1 Answer

No life


There are a couple issues that could be going on here, so let's address them both:

1. Your iPAQ's battery could not be charged. Try charging the iPAQ on it's cradle for a couple hours and then try it.

2. Your iPAQ could have it's back light turned off meaning the screen is still displaying everything, but you just can't see it. Assuming the iPAQ is currently off, press the power button once ( to turn it on) then try holding down the power button for 5 seconds and see if the screen lights up.

Feb 01, 2008 | HP iPAQ RZ1710 Pocket PC

3 Answers

HW6515d Ipaq Sound with TomTom Sat NAv


The ipaq 6515 has a microswitch that will turn off the pda if the battery cover is removed. When you remove the cover and try to turn it on even with the external power supply plugged in, the red led will light up.

Jan 29, 2008 | HP iPAQ hw6515 Pocket PC

1 Answer

New ROM update - navigation issues


I had the same problem. By turning of the POI (Points Of Interest) it no longer crashed. There is also and update for tomtom, version 5.10. (www.tomtom.com -> support). I haven't checked it out myself though. There is a guide available on how to configure your non-tomtom-bt GPS mouse. http://62.250.17.58/cgi-bin/uk.cfg/php/enduser/std_adp.php?p_faqid=3236&p_cre ated=1119370927&p_sid=Bs6i7vLh&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYn k9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD0zMzgmcF9wcm9kcz0mcF9jYXRzPSZ wX3B2PSZwX2N2PSZwX3BhZ2U9MQ**&p_li=&p_topview=1 good luck!

Sep 11, 2005 | HP iPAQ HX2755 Pocket PC

Not finding what you are looking for?
HP iPAQ Bluetooth GPS Navigation Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP GPS Experts

yadayada
yadayada

Level 3 Expert

71856 Answers

The Knight
The Knight

Level 3 Expert

73157 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...