Question about Panasonic KX-T7730 Corded Phone

1 Answer

I've lost an outgoing line--inoperable

On two of our five phones where I tried to program a speed dial, not only does the speed dial no longer work, but on just those two phones, outgoing line #2 does not work--no dial tone, no light, nothing. So I must have done something wrong while programming. The manual is useless!

Posted by on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have the same problem... whats the way out for this?

Posted on Oct 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Line 1 function has been deleted from the memory key.


If it is Blank button Terminal and sets ---> line access .....> line assignment and go to line 001 make apply or apply and ring it will come back

May 24, 2014 | Nortel T7316E 2-Line Corded Phone

1 Answer

EXECUTONE 64800 PHONE, HOW TO PROGRAM STATION SPEED DIAL # 'S


from the phone press program key, than 01 for speed dial 1 and then the phone number you need to program in under speed dial 1, after done, press program key. to dial out press outside line key, than program 01 and it will dial out to that numeber. you have 30 speed dials per phone.

Jan 09, 2014 | Executone 64 Corded Phone

1 Answer

Hello. I have a M7310 Nortel office phone. All of a sudden, the Speed Dial button will not work. In checking the phone, all the speed dial numbers are still programed in the phone, but again the speed dial...


What? They are either programmed or not programmed. If the button is blank, I'm voting for NOT programmed.

If your system is old enough, it's probably lost the backup battery. Ugly things, like pulse dial and only 2 lines are what usually happens, along with losing all of the button mapping but your 2 lines and the default programs of LNR, CONF, etc.

If it's just one phone, there's no magic recall. You'll just have to reprogram it. Same with the system if you've lost everything, but I"d call a repair tech first to fix the battery on the software cartridge.

Carl

Apr 14, 2011 | NorStar Meridian M7310 Phone

2 Answers

When i pickup the phone i want the intercom to be my first option not a line out?


One of the following two methods of programming "Preferred Line Assignment-Outgoing" should work depending on which Panasonic phone system your KX-T7433B phone is connected to. Try number one first, if PROGRAM 99 does not get you into station programming, try number 2.

1) Press PROGRAM button then dial 99 to enter station programming. Dial 1, then press INTERCOM button to select Intercom as your Preferred Line Assignment-Outgoing choice. Press AUTODIAL/STORE button to save programming. Press PROGRAM button to end station programming or lifthandset then replace in cradle to end station programming.

2) Press PROGRAM button then dial 19, press AUTODIAL/STORE button. Press INTERCOM button then AUTODIAL/STORE button. Press PROGRAM button to end station programming or lift handset and replace in cradle to end station programming.

Feb 11, 2011 | Panasonic KX-T7433B Corded Phone

1 Answer

I was storing some extension numbers and spead dial numbers and I must have done something wrong as anytime I pick up handset to make a call a 'reorder tone' message comes up on the display- this is before...


So don't pick up the handset :-)

There are some line preference and pickup dial programs that just happen to sit in PROGRAM 1x. My guess is that you have assigned an empty or invalid pickup dial code to the phone.

Try this first. Press PROGRAM and dial 12 ENTER. Is the Hot Line mode ON? If it is, press SEL and ENTER. Wow. That was easy :-)

Didn't work? Let's go for Preferred Line Outgoing next. Dial PROGRAM 19 and 3 ENTER. That makes the intercom prime (0 is none, 1 is idle line 2 (xx) is a specific line).

If you tried both of these, and still no joy, then it's time to reset the phone. The problem with that is you have to dial the code IMMEDIATELY as you're picking up the handset. Good luck with that. The reset code is 79# or 790.

Carl

Jan 25, 2011 | Panasonic KX-T7630 Corded Phone

1 Answer

How do I change the speed dial outgoing number??


For personal speed dial numbers press feature *4 , enter in speed dial bank number 71-94 (256-279, it changes with different versions), enter number, press ok
- speed dial numbers 01- 70 are system wide speed dial numbers and are changed in system programming2.gif.System programming is done on M7310,M7324 and T7316 set only.
Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say Terminals&Sets.
The 4 top line/feature keys are now used for programming2.gif.
At the terminals&sets prompt, press the next key 3 times(bottom right arrow).
The display should say Sys speed dial.
Press the show key (top right arrow)
The display should say speed dial#:--
enter in the speed dial number you wish to program(40-70) .
Press the show key (top right arrow) .
The display should show the existing speed dial number
Press the chg key
Enter in new telephone number
press ok when finished
repeat for remaining speed dials
Press the release key when finished

Oct 14, 2009 | NorStar M7310 Corded Phone

2 Answers

Lost manual. How do I program speed dial?


Hit Store
Enter Number
Hit Store
Select memory spot (buttons down the right hand side of the phone)

Mar 25, 2009 | General Electric RCA-25424RE1 4-Line...

1 Answer

Avaya 18D unable to make outgoing calls


Sounds like you changed your line selection. Changing line selection on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Centralized Programming.

Enter in the extension number that you want to program.

enter **
press the lit line in the order you want the to be used, i.e. line 2 then line 3 then line 4 etc.
enter ** when finished with line selection
.
Press feature "00" to logout
Hope that helps

Mar 20, 2009 | Avaya Partner 18D Display Phone (315807BA)

2 Answers

UNABLE TO RETRIEVE CALLS ON HOLD


Hello, i hope you[re doing great.  I had a problem with the auto dial button and a solution was to change from program to set.... in the rear part of the phone, where the phone cable plugs in, there is a little switch. Try changing its position, hope this works for you too...

Feb 19, 2009 | Panasonic KX-T7020 Corded Phone

1 Answer

Clear speed dial/one touch settings


There is no way to clear the settings you would have to re-program the correct setting. Did you program one touch speed dial on the line buttons? I do not see how programming a speed dial could effect accessing the CO lines unless you re-programmed the CO line buttons by mistake. If so, you would need to re-program those soft keys to line buttons. The manual you have may not cover this? The phone you have can work on a few different Panasonic phone systems. If you need a more detailed manual you will first need to know which Panasonic phone system you have. The phone part number WILL NOT help you determine which phone system you have. There is a main control unit somewhere (basement, utility closet, etc..)

Aug 13, 2007 | Panasonic KX-T7431 Corded Phone

Not finding what you are looking for?
Panasonic KX-T7730 Corded Phone Logo

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

kakima

Level 3 Expert

98694 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...