MY MOTHERBOARD DONT RECOGNIZE THE MEMORY, YOU MUST REINICIALIZE 3 TIMES AND THEN BEGIN TO WORKS, I TEST THE MEMORY & WORKS IN OTHER MOTHERBOARDS, I TRY WITH OTHER MEMORIES & DO THE SAME, GIVES A7 ERROR
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sometimes, if the memory is a newer type, even though it matches the specifications laid out by the motherboard, there may be other factors like timing and voltage which cause a motherboard to not function with that memory. A lot of the time a motherboard manufacturer will be made aware of this problem and release a BIOS update to resolve it. Have you checked the motherboard manufacturer's website, ESC, to see if your particular motherboard is up-to-date with the most currently released BIOS version?
You can figure out what version of BIOS you're running if you go to Start -> All Programs -> Accessories -> System Tools -> System Information. On that first page it will list the BIOS version information and the date of that BIOS. If ESC has a newer BIOS available, you might try updating the BIOS to see if that resolves the issue.
I had a problem like this -- tried plugging the camera in to the rear USB slots not the front ones and it worked fine.
I think that it doesn't like going via a USB hub, but wants a direct connection. All of the USB ports on my computer are connected direct to the motherboard (i.e. none are on PCI cards or anything), but looking at the hardware info for the computer, it looks like the motherboard has a few "direct" USB connections, and then an on-board hub which the front ports connect to. If your computers are the same, that would explain things. I'd suggest trying each USB port one at a time (turn the camera off before plugging in, and back on when in) and see if one of them works. Wouldn't hurt to power the camera from the mains at the time too.
I have read that there are dual memory controllers (duel channel) and that when you use 2GB like that you are using 1 memory controller for each stick. Maybe one of your memory controllers is bad... maybe popped a cap? Sounds like time for a new MB. See this thread...
The BIOS recognizes the same speed chip. Say, "PNY 512mb 333mhz 12ns". If you mix and mismatch, the BIOS won't see it even though your motherboard will take the differant type chips.
They should all be the same.