- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You just have a problem with colour PCU (SC 365 - magenta, SC366 - cyan). The main reason is that toner density is abnormal. Sometimes, when you replace toners, printer receive to much toner for a short time, and after that you have an abnormal toner density (higher). You can check in service mode (hold up and down arrows for 6-7 sec, release them and press ok button) following thing : choose 2. engine then with arrows choose 3. process then choose Vt display, for each color by default there should by somewhere arround 2.4V. If you see for some colors, for example 0.02V, then this is a problem(to much toner). In this case the only thing that you can do is to restart printer and try to print enough pages, filled with problem color. Usually you can print max 3 pages. Then restart printer and try another 3 pages. Print until the you will be able to print at least 4 pages continuously. Good luck and remember that this is a technical problem and you should ask someone qualified for the job. I am sure that 80% of service engineers can't repair this issue. But I can.
You probably don't have an online key on a 5200dn. In this case you need to power on while holding escape and the third LCD Burton which is directly above escape. It should reset just by doing this. Mine did just about 5 min ago :)
From the Control Panel > Printers and Faxes, select your printer driver and open the printing preferences.
In Setup, in the [Job Type:] click on the arrow and select Locked Print.
Press Details and enter User ID and password.
Print a document.
Go at the printer and press the Menu button and select Locked print, and enter your password to print your doc.