Question about Intel Motherboard

1 Answer

CD ROM is not detect in My Computer

I connect external CD ROM with USB port power is OK but drive is not shown on My Computer. USB port is OK because pen drive is also properly run.
Then use data cable with primary slave connected CD ROM but same result.
so What can i do which detect and proper run CD ROM?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,913 Answers

Dtect your rom in bios
and try.

Posted on Apr 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

External drive not picked up on computer


External hard drives not only provide additional storage space on a computer system but also allow data to be conveniently transported from one computer to another.


These drives typically plug right in to a port on the computer and function without any additional setup; however, if you are running into trouble where your external hard drive is not being detected, you must troubleshoot the situation to determine why the drive appears to be missing.


Check the USB connection running from the hard drive to your computer.

If the USB cable is not seated securely in the port, the computer will not detect the external drive.


Disconnect the USB cable from the computer and plug it into a different USB port. Occasionally, a USB port will fail to function with some hardware and changing the USB connection may correct this issue.


Switch from a USB to a Firewire cable connection, if possible.

The USB port on the hard drive may have died; if so, changing to a Firewire connection will resolve this issue.


Install the driver for the external device from the installation disc provided with the product. Older computer systems may require you to manually install this driver.


After inserting the installation CD, follow the prompts from the installation wizard to install the driver on your computer.


Restart the computer.

If you connected the external drive while the computer is powered down, it may not recognize the device when you turn on the computer.


After restarting the computer, connect the external drive to the system.

The drive should now be detected by your operating system.


Connect the external hard drive to a power source and then plug it into your PC computer using a USB or Firewire cable.


Log on to your PC computer using an account with administrative privileges.

Open the Start menu and click on the "Control Panel" icon.


Open the "Administrative Tools" folder and then double-click on the "Computer Management" icon.


Select "Disk Management" from the list of options on left side of the window.


Right-click on the drive you want your computer to recognize and select "Change Drive Letter and Paths."


Select a drive letter for the external hard drive to be recognized as and click "OK."

The drive will now appear in My Computer.


Hope this helps.

Nov 22, 2012 | Samsung G3 Station Desktop External Drive...

1 Answer

A blue and red flashing light and won't connect to computer


External hard drives not only provide additional storage space on a computer system but also allow data to be conveniently transported from one computer to another.


These drives typically plug right in to a port on the computer and function without any additional setup; however, if you are running into trouble where your external hard drive is not being detected, you must troubleshoot the situation to determine why the drive appears to be missing.


Check the USB connection running from the hard drive to your computer.

If the USB cable is not seated securely in the port, the computer will not detect the external drive.


Disconnect the USB cable from the computer and plug it into a different USB port. Occasionally, a USB port will fail to function with some hardware and changing the USB connection may correct this issue.


Switch from a USB to a Firewire cable connection, if possible.

The USB port on the hard drive may have died; if so, changing to a Firewire connection will resolve this issue.


Install the driver for the external device from the installation disc provided with the product. Older computer systems may require you to manually install this driver.


After inserting the installation CD, follow the prompts from the installation wizard to install the driver on your computer.


Restart the computer.

If you connected the external drive while the computer is powered down, it may not recognize the device when you turn on the computer.


After restarting the computer, connect the external drive to the system.

The drive should now be detected by your operating system.


Connect the external hard drive to a power source and then plug it into your PC computer using a USB or Firewire cable.


Log on to your PC computer using an account with administrative privileges.

Open the Start menu and click on the "Control Panel" icon.


Open the "Administrative Tools" folder and then double-click on the "Computer Management" icon.


Select "Disk Management" from the list of options on left side of the window.


Right-click on the drive you want your computer to recognize and select "Change Drive Letter and Paths."


Select a drive letter for the external hard drive to be recognized as and click "OK."

The drive will now appear in My Computer.


Hope this helps.

Nov 22, 2012 | NexxTech new 3.5-inch hard drive enclosure...

1 Answer

Cd rom drive not shown in my computer and device manager


Device is not detected by the connecting port of motherboard. Can be caused by
1. CD ROM itself damage.
2. The connecting port of motherboard damage
3. Both are OK but not installed (physically) properly.

Oct 21, 2012 | Dell Inspiron 1100 Notebook

1 Answer

How can i reformat my acer aspire 4520 without cd rom?


Try this method it may work.
If you can boot up with the external USB hard drive on your Acer, then use a working computer and copy the Windows installation CD onto the external hard disk then connect the USB externak hard disk to the USB port on your Acer and boot up using the external hard drive.

Feb 18, 2012 | Acer Aspire 4520-5141 Notebook

1 Answer

My USB Drive has been not open in my computer


Hello,

First of all make sure that the USB port that you are using to connect it to your PC is a USB 2.0 port, and not USB 1.0.

Also if it came with an external power, connect it to the external power before putting on your PC.

This is because the voltage supplied by USB 1.0 is lower than that of USB 2.0 and therefore might not be enough to power up your USB Drive.

After making sure about this, power up your system, and plug the external drive, then Right-Click on my computer icon, select manage, then go to Disk Management Option.

On the Disk management option Page you should see ALL the drives installed on your system, including the hidden ones, so what you will just do is, try and locate the one representing your external drive, and right click on it. then select "Change Drive letter and Paths", and give the drive any new, unique letter (i.e alphabet) different from the ones already on your system, and click on OK.

This should make your external Drive to be detected automatically.

Or in case there is a problem with the read/write head inside the hard drive.

What I would advise you to do is, unscrew the hard drive case and remove the Hard disk from the case, connect it directly to a system, not externally or through USB this time around, then get a software called NTFS DOS Professional. It is a software that works like magic when it comes to hard drive repairs.

If you know any other hard drive utility, apart from this, you can also use it. I just recommend this personally because that is what I use.

Insert it into your PC, start up your CD-ROM and let your system boot from CD-ROM.

It works through DOS, and it should be able to help you with it.

If this does not solve the problem, then I'm afraid you might need to replace the hard drive.

And if it repairs it, I would suggest that you just retrieve all your valuable files from it and don't fully rely on the hard drive again because of the hardware error it has developed. Just keep using it as a second.

If you cannot do this by yourself, just get a very good technician to do it for you instead.

Kindly keep me posted about the problem.

Hope it helps.

Goodluck.

Apr 25, 2010 | Intel X25e Kingston Ssdnow E Series 32gb...

1 Answer

Samsung external dvd drive not detected.model SE084-ts01


Hello my friend,first make sure that you have the right cable connected to your computer,your DVD drive has the power cord plugged in and the cables are OK and fixed in their positions.Check also that your DVD drive is working by watching its light and if you click the eject button it response.Second if all these are OK and your DVD drive is working but is not being recognized make sure that is detected by your system and there is not a conflict or driver issue.To do that you right-click My Computer then select Properties,select the Hardware tab,click the Device Manager button and go to DVD/CD-ROM drives,double click to open the tree,if you can see your device there with a yellow triangle it means is been recognized but there is a problem with driver usually or conflict, but if there is not a triangle it means or your DVD drive is corrupted or the cables or your usb ports(or the port you are connected to) but let me know.

Feb 12, 2010 | Samsung Computers & Internet

1 Answer

My freecom 1T exrternal HD does not connect and has burn smell


Hello,

First of all make sure that the USB port that you are using to connect it to your PC is a USB 2.0 port, and not USB 1.0.

Also if it came with an external power, connect it to the external power before putting on your PC.

This is because the voltage supplied by USB 1.0 is lower than that of USB 2.0 and therefore might not be enough to power up your USB Drive.

After making sure about this, power up your system, and plug the external drive, then Right-Click on my computer icon, select manage, then go to Disk Management Option.

On the Disk management option Page you should see ALL the drives installed on your system, including the hidden ones, so what you will just do is, try and locate the one representing your external drive, and right click on it. then select "Change Drive letter and Paths", and give the drive any new, unique letter (i.e alphabet) different from the ones already on your system, and click on OK.

This should make your external Drive to be detected automatically.

Or in case there is a problem with the read/write head inside the hard drive.

What I would advise you to do is, unscrew the hard drive case and remove the Hard disk from the case, connect it directly to a system, not externally or through USB this time around, then get a software called NTFS DOS Professional. It is a software that works like magic when it comes to hard drive repairs.

If you know any other hard drive utility, apart from this, you can also use it. I just recommend this personally because that is what I use.

Insert it into your PC, start up your CD-ROM and let your system boot from CD-ROM.

It works through DOS, and it should be able to help you with it.

If this does not solve the problem, then I'm afraid you might need to replace the hard drive.

And if it repairs it, I would suggest that you just retrieve all your valuable files from it and don't fully rely on the hard drive again because of the hardware error it has developed. Just keep using it as a second.

If you cannot do this by yourself, just get a very good technician to do it for you instead.

Kindly keep me posted about the problem.

Hope it helps.

Goodluck.

Nov 25, 2009 | Computers & Internet

1 Answer

Not detecting the external hdd 120gb wd


Hello,

First of all make sure that the USB port that you are using to connect it to your PC is a USB 2.0 port, and not USB 1.0.

Also if it came with an external power, connect it to the external power before putting on your PC.

This is because the voltage supplied by USB 1.0 is lower than that of USB 2.0 and therefore might not be enough to power up your USB Drive.

After making sure about this, power up your system, and plug the harddrive, then Right-Click on my computer icon, select manage, then go to Disk Management Option.

On the Disk management option Page you should see ALL the drives installed on your system, including the hidden ones, so what you will just do is, try and locate the one representing your harddrive, and right click on it.

Then select "Change Drive letter and Paths", and give the drive any new, unique letter (i.e alphabet) different from the ones already on your system, and click on OK.

This should make your harddrive to be detected automatically.

In case it still doesnt work after trying this, then do this:

Unscrew the hard drive case and remove the Hard disk from the case, connect it directly to a system, not externally or through USB this time around, then get a software called NTFS DOS Professional. It is a software that works like magic when it comes to hard drive repairs.

If you know any other hard drive utility, apart from this, you can also use it. I just recommend this personally because that is what I use.

Insert it into your PC, start up your CD-ROM and let your system boot from CD-ROM.

It works through DOS, and it should be able to help you with it.

If this does not solve the problem, then I'm afraid you might need to replace the hard drive.

And if it repairs it, I would suggest that you just retrieve all your valuable files from it and don't fully rely on the hard drive again because of the hardware error it has developed. Just keep using it as a second.

If you cannot do this by yourself, just get a very good technician to do it for you instead.

Kindly keep me posted about the problem.

Hope it helps.

Goodluck.

Nov 25, 2009 | Computers & Internet

3 Answers

USB External Harddisk Detection Problem


some people say that its because of not enough power . try inserting the hard disk in other usb slots ( at the back ). onlu usb slots at the back of my pc detects my hard disk

Aug 06, 2009 | ASUS M2N-MX Motherboard

1 Answer

SATA Raid card on PCI unable to detect eSATA Hard Drive


if you install the raid controller drive,it means it will shown the drives..but it not shown? is this what you mean? did you try to see in the computer management? if you dont know, check this out..right click my computer-manage-select disk management and check if your drive is there......this is only what i know about what you mean.

Mar 03, 2009 | Intel Motherboard

Not finding what you are looking for?
Intel Motherboard Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

David
David

Level 3 Expert

778 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...