My HP desktop computer wont load, when i turn it on nothing happen, just the HP start up screen. i had tries everything i can like checking all the cords and rebooting the computer many time but nothing seem to work. can i get some ideas how to fixs this problem?
Open the case and change the CMOS jumper to clear the CMOS out. Leave for about 15 seconds. Then change it back and turn on your system. If that doesnt work, pop out the BIOS battery and unplug the PC and what for about 10 mins then put the battery back in and turn on.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
restart and tap F8 key, if loads to repair your computer/Advanced boot option, select safe mode using the down arrow key and log in to your account, create a backup of all the data on a removable storage device.
Insert System disk and run a system recovery to the original fcty setting, if backup done, restore from the removable storage device.
Bios Chip HP is bad replace Invent screen is the bios screen telling the pc what to do.I replace mine at less than $6.00 Seller: *bios*depot2010 good luck Plus remember get a back up and install program on other hdd. not (c)
one of the files in the system32 directory in the windows folder is corrupt, the files in the system32 folder contains vital files for the boot procedure, try to start the machine in "safe mode" by pressing F8 after the sony boot screen, if it allows you into the operating system you will need to choose "system Restore" take the time back to at least a week before your problems started DO NOT CREATE A RESTORE POINT