Question about Toshiba e-STUDIO 205CP Printer

1 Answer

E studio 207 wont switch on

A brand new e studio 207, worked for three days before dying on me. what can be the problem, the fuse is not blown checked it with a multimeter and even replaced it. can someone help? im at a remote corner of the world.....

Posted by on

  • AmanPuri Apr 01, 2008

    i know its covered by warranty, but as i said am sitting in a remote corner of the world and itll take ages for a tech to fetch up to me. guess was looking for a quickfix solution in case some1 has suffered the same hassle earlier and can guide me in the right direction, thanks anyway....

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

It's most likely a power supply failure.

If it's brand new, it will be covered by warranty.

Posted on Apr 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset Toshiba e studio 207 photo copier c46 error


e studio 207 model only have c41 to c45. there is no c46 error cord.

May 03, 2016 | Toshiba Office Equipment & Supplies

1 Answer

E03 error in toshiba e studio 207


Power-ON jam:
The paper is remaining on the
paper transport path when power is turned ON.
1) Check if the connector of the sensor is disconnected.
2) Check if any of the connectors on the MAIN board is disconnected.
3) Check if the connector pins are disconnected and the harnesses are open circuited.
4) Replace the sensor.
5) Replace the MAIN board.

Mar 15, 2016 | Toshiba e-Studio 207 Copier

2 Answers

I am forget passward our photo copier e studio 207 how oppen this machine plese informe me


Perhaps you can find some information at Toshiba.
or the security info Here...
http://www.estudio.com.sg/product/mfp_security_features.aspx

Jul 22, 2014 | Toshiba e-Studio 207 Copier

1 Answer

C44


Fuser error. Try resetting error status flag to 0 in 08-400. If it doesn't reset, possibly blown thermostat. If it does reset, and code returns after running copies, replace thermistor.

Jul 18, 2014 | Toshiba e-Studio 207 Copier

1 Answer

Service code 415


I could not find a service code 415 in the manual. Here is a link to a free manual you can use to do your own repair. TOSHIBA STUDIO 167 207 237 SM Service Manual free download schematics...

Jul 08, 2014 | Toshiba e-Studio 207 Copier

1 Answer

Toshiba e studio 207 error code c 97


toshiba estudio 207 copier c-56 code error solve this problems

Jan 22, 2013 | Toshiba e-Studio 207 Copier

3 Answers

Sir i have Toshiba 207 copier sir now write on screen call for service C44 sir please solve my this problem thanks


C44-Heater abnormality after abnormality judgment: The temperature of the fuser roller has exceeded the range of control or does not even reach the range.

You can try going into (08) mode by holding 0 and 8 while turning on the copier. Once the copier starts up key in 400 and press start, input "0" and press interrupt. Try rebooting the copier, if this doesn't clear that call for service then you are going to need to get work done on your fuser.

Aug 28, 2010 | Toshiba e-Studio 205 Copier

1 Answer

Toshiba e-studio 207 "local device communication error


On the host pc that connected to the MFP, check the paper size setting under the driver properties.

Apr 22, 2009 | Toshiba e-Studio 232 Black and White...

Not finding what you are looking for?
Toshiba e-STUDIO  205CP Printer Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

pkwc

Level 2 Expert

254 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...