Question about Camera Flashes

2 Answers

Tanning bed setup

How to make a Montego Bay tanning bed work without having a single station timer setup.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

HI a bought a tanning bed last night from a tanning salon it was hooked threw a phone line or something like that my hubby brought it home and hooked it up here .now i cant get it to work ,will i ever see it work and how can i get it to work for me.

Posted on May 28, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

You would need a by-pass plug or Jumper - or perhaps reprogram the timer parameters. Your best bet is to call AAA WOLFF TANNING - www.wolfftanning.com at 1-866-WOLFF-TAN and give them the make & model of the tanning bed - they repair all tanning beds and carry parts in stock.

Posted on Jun 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flash not firing, pilot light not on but display is fine


Hi John,
If your problem has not been fixed or a solution not found yet then you may consider this. Flash units are built with many tiny parts; thus, when a single component malfunction, it will render the whole unit useless. You mentioned the pilot light is not working - that indicates that power is not flowing through the unit.
Check the filament of the unit - if you notice some brownish stain on either end of the tube, it indicates the filament has burned out. Changing the type of batteries won't make any difference.
the only option you have now is to service the flash unit

May 10, 2016 | Canon SPEEDLITE 580EX TTL Flash

1 Answer

JVC kw-nt500hdt will not eject disk


IF you have 2 disks stuck in it you are not going to be able to remove them without damage unless you take the unit apart.

Sep 28, 2015 | JVC Kw-nt500hdt Navigation Receiver With...

1 Answer

TTL Flash compatable with pentax K-7


To let a flash work in TTL mode the camera and flash must be from or made for the same brand. Like Metz for Nikon, the Through The Lens measuring of the light, will only work with Nikon camera's. If the Vivitar 850 was compatible with Nikon, you only can use it in TTL mode with a Nikon. If you want to use it on another camera, you have to set the flash and the camera to manual. (sync speed is not allowed to be shorter tan the manual of the camera says..)
The hot shoe should have the same connection. most brands do have their own hot shoe. And never use an old flash or speed light in a digital camera, because with the old ones the high voltage can pass through the hot shoe to the electronics in the camera, damaging the camera.

Jul 13, 2014 | Vivitar 850AF for Nikon TTL Flash

1 Answer

Soldering iron and rework station


NEW Updated Aoyue 968A SMD Digital Hot Air Rework Station 4 in 1...

There are many rework stations on the market, and the price range is from a few hundred to a few thousand dollars. So it's a matter of your needs and budget.

I suggest you go on line and do a search " soldering rework stations" , and read up on the various models that are available. Amazon is a good site for this, because you can get a lot feedback from people who purchased the products.

Jun 02, 2014 | Fuji Instax 210 Wide Polaroid Camera 80...

1 Answer

Where can I purchase a new or used battery holder for a Vivitar 283 flash attachment? Mine was left in too long and the batteries destroyed the contacts.


Best place for finding Vivitar 283 anything is on e-Bay, I use a gang of them doing my location photography and have several holders preloaded with batteries so when the cycle time starts to get more then I can bare I just switch out the holders.

All my stuff came off e-Bay.

Feb 21, 2011 | Vivitar 283 Flash

1 Answer

Some of my flashes double flash some single flash


Having gone over a month without a response, I assume this is no longer a problem.

Jul 20, 2010 | Phoenix Gold ZBIS-92C TTL Flash

1 Answer

No power know


if you're talking about the plug in knob on the front of the unit... without the knob, the unit will only deliver full power and not try to control the amount of light based on the color coding. there is no way around this. you can, order a new plug in module either from vivitar, on line stores like B&H or probably find one on e-bay.

Jan 27, 2009 | Vivitar 285HV Flash

2 Answers

Lights out


DUH?? This is a photography site, imbecile.

Jul 21, 2008 | Camera Flashes

2 Answers

Tanning bed


what???????

May 28, 2008 | Camera Flashes

Not finding what you are looking for?
Camera Flashes Logo

Related Topics:

676 people viewed this question

Ask a Question

Usually answered in minutes!

Top Camera Flashes Experts

kakima

Level 3 Expert

96417 Answers

Doberman

Level 2 Expert

246 Answers

Neil

Level 1 Expert

21 Answers

Are you a Camera Flash Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...