Hi there!!! i have a dj mixer Ecler Nuo 2... One of my audio outputs went dead....vis it possible to replace it with the new one and of course where in london i can do it???? please help... i need some good audio electronic expert who will do it for me...
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert who has written 20 answers of more than 400 characters.
Re: phono output went dead, help!!
It is almost impossible to replace the outputs on a devices once it's fried. There is more internal stuff that goes along with it most of the time vs. just the output portion of it. If it doesnt cost too much most places will check it out for free and then let you know the costs and let you decided from there if you would like to or not.
I'd recommend contacting the manufacturer to see who is legit to repair this product as if it was under the warranty, which even if its not you can at least contact those people independently in order to better resolve this issue. Otherwise use google maps to track someone down in your area to contact.
Again, just to warn you it might be an internal board vs. just the output panel. I've seen this happen before with plenty of connections on different devices both audio and visual...it can be pretty heft price to replace and some times you are better off just upgrading onto a new model vs. paying out the costs to fix it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if this is a dj type set up, the mixer should have a main output (RCA or XLR), that is what you connect to the input on the amp, each deck should have RCA outputs, depending on if they are turntables or cd players, plug the turntables into the phono channel inputs on the mixer and if they are cd players, plug them into the line inputs on the mixer
Depending upon the compressor and mixer, there are a couple of options. The compressor should be between the output of the mixer and the input of the power amps. To accomplish this, you can use either an insert cable or 2 audio cables. Some mixers have an insert point for each output. These are usually marked as inserts adn use TRS cables (Tip/Ring/Sleeve). These cables are essentially the same as stereo 1/4" cables. If the compressor can take that, than all you need is a single insert cable. This insert cable will insert the compressor directly so that you still connect the mixer output to the amp as you woud without the compressor. If not, then you will need two 1/4" standard audio cables to connect the mixer output L/R to the amp input L/R.
depends what audio outputs you have on the sky box,analogue (two phono usually red for right channel and white left channel)in which case just use phono leads to the phono inputs,Optical(toslink),connect an optical cable from the output to the optical input on the dvd channel of the pioneer,coaxial (spdif)connect to spdif input on the laser disk input of the pioneer,dont connect to the attenuated spdif.In the unlikeley event of the sky box not having any audio outputs,just use the outputs from the tv to the pioneer.The optical digital input gives the best quality on the vsa eo6