Question about Pioneer Projection Televisions

Open Question

Pioneer Plasma Model PDP-507XG Will Not Power Up

Pioneer Plasma TV Model PDP-507XG will not power up, the red standby light comes on and blinks two or three times then shutsdown.

Posted by on

4 Suggested Answers

  • 1 Answer

SOURCE: plasma model pdp-433pu loud pop

Sounds like it could be a power supply.
let me know if you want to sell it.
naturboy-at-ufl-dot-edu

Posted on Oct 04, 2008

  • 1 Answer

SOURCE: Soniq plasma will not power up

1.8 volt regulator on image pcb

Posted on Feb 10, 2009

  • 18 Answers

SOURCE: rca d52w14 hit power green light blinks three times wont come on

could be power supply problem or high voltage problem. check caps in main power supply first.look for caps that have tops puffed up ususlly three or four.....

Posted on Feb 25, 2009

  • 1 Answer

SOURCE: Phillips 37FD9944/01S Plasma TV - Power Supply

Hello I hev a proble with PHILIPS mod; 37FD9944/01S chassis FM 33 AA.The picture of TV its blinking.Please halp me.

Posted on Jun 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 56 in hdtv Panasonic tv will not come on green light flashes 20 times then goes to red. Help, on disability fixed income & cant afford to get repair or new tv. Please help, as soon as poss


Panasonic Plasma TV Repair - Understanding 14 Blink ...

? 8:35
https://www.youtube.com/watch?v=iHBIiRxhe0w
Sep 26, 2014 - Uploaded by ShopJimmy.com
Panasonic Plasma 14 Blink Code Explained with Repair Info How to ... I guess I'll try the SC board and if that does not work simply save up for a new ... The red power led was flashing 12 timespause a few seconds then flash 12 again. ... It powers up and shows the green power light is on, but there's no ...

The power light keeps flashing and the tv wont turn on - TV ...

www.tomsguide.com/answers/id.../power-light-flashing-wont-turn.html
Oct 24, 2015 - More about : power light flashing wont turn ... December 20, 2013 10:12:55 AM ... sound like it is coming on then it shuts off and the red power light flashes slowly. ... 50in Plasma tv power light is flashing 8 times and won't turn on. ...tv to come on bcause the power button keep blinking my tv will not come on.

Nov 06, 2015 | Panasonic Projection Televisions

4 Answers

Hi I have a Pioneer PDP-436XDE its over 3 years old and has worked perfectly until today when it switched itself off and would not switch back on. Ive unplugged it from the mains and left it for some time...


The reason for your tv not switching on properly may be due to

The main filter capacitor or other filter capacitors in the low voltage power supply is dried up and this can cause all kinds of regulation problems.

The power supply regulator is defective (or marginal) allowing excessive voltage on its output and then the X-ray protection circuitry shuts you down.

blue or red colour may be due to fault in chroma decoder circuitry.

Jul 05, 2008 | Pioneer Projection Televisions

1 Answer

Pioneer 65" TV Model # SD-643HD5 won't power up.


I would suggest replacing the board itself, chances are what caused those fuses to blow is still faulty. did you check those fuses again after you powered it back up?

Jun 12, 2011 | Pioneer Projection Televisions

2 Answers

My sony 50" wega just quit. No picture , no sound , no nothing ?


Hi,
If you see standby red light blinking on Tv front with 3 seconds interval then count its blinks from pause to pause and let me know, its an error code.
And if TV does not even show standby light then check fuse in power supply that would be blew off for some reason, replace it.
Still problem? let me know with exact model number of your Sony TV.
Thanks.

Jan 02, 2010 | Sony Grand WEGA KDF-50WE655 50" Rear...

2 Answers

Standby light keeps blinking. tv wont turn on


If the TV goes off completely, then is usually a faulty power board.

If the TV goes in standby, then it is in protection mode.

Ensure also that the fault is not coming from a faulty receiver box sending
bad signal, check if you get same problem on DVD with no receiver box
connected.

Try first leaving the TV power cord unplugged for some times, let say one hour or so.

The flashing light indicates a diagnostic state called protection.
When the TV goes on protection there are only two possible causes.

1The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or abroken contact, identified an internal fault and kicked in , starting the flashing light.

If you are in situation one, then the TV will reset just unplugging power cord for one or two hours,sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

If under warranty contact the manufacturer ringing the number on the user manual

If you want to repair at your own expenses, just locate any good qualified repairer.

If you want to DIY you find parts here,

All: Appliance parts, electronics parts & more from PartStore.com

Encompass Parts Distribution

LCD/Plasma Electronic Replacement Parts: Plasma & LCD TVs, Appliances |
On Rear Projection : check lamp, lamp ballast, power board, and convergence.

May 07, 2009 | Projection Televisions

3 Answers

The Power Light is Red


yeah, should stay red when unit is turned off, indicating there's power but it's doing nothing.

Per user manual:
Solid red - power off (standby mode)
blinking red - power off (now cooling)
blinking green - power on (preparing to light lamp)
solid green - power on

Mar 08, 2009 | Panasonic PT-40LC12 40" Rear Projection...

1 Answer

Plasma model pdp-433pu loud pop thin no picture now 4 or 5 red blinking lightthin stop for about 15 sec


Sounds like it could be a power supply.
let me know if you want to sell it.
naturboy-at-ufl-dot-edu

Aug 26, 2008 | Pioneer Projection Televisions

3 Answers

Phillips 37FD9944/01S Plasma TV - Power Supply


dont waiste your money problem main or logic board or if shure power supply go radio shack and get one with specifications match voltage,ampers,and polarity

Mar 30, 2008 | Philips 60PP9352 60" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

yadayada
yadayada

Level 3 Expert

61203 Answers

zorbrack

Level 1 Expert

19 Answers

Are you a Pioneer Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...