Question about Maytag CWG3100A Gas Single Oven

1 Answer

Kenmore ceramic top electric stove door problem

I purchased a kenmore ceramic top electric stove and the door will not completely close. the inside light stays on and im losing heat. I TOOK OFF THE DOOR AND TRIED TO FIX IT BUT IT IS STILL THE SAME.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 131 Answers

For a while, they were building Kenmore stoves with hinges that get bent out of shape easily. If your stove is still in warranty, (I'm sorry to say) call the 800 number for a repair. You can get a Saturday appointment if you're persistent enough.
If not in warranty, the hinge kit should still fix it, and the parts are about $45.00 for both, and they come with instructions. It took me about an hour the first time, but I've got it down to 25 mins. You'll need a square drive bit, and beware of the very sharp metal edges.
If you have a warming drawer in the bottom, it's more difficult. In this case, removing the drawer is harder. And after getting the drawer out, the metal liner along the sides of the drawer have to be loosened in the front and bent inward out of the way. Don't worry, they go right back with no trouble.
If you decide to pay someone to do the work, please call a local company.

Good luck!

Posted on Mar 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How complicated is it to fix the control panel on a Kenmore self cleaning oven with ceramic top stove? It was bought in 2003 and I'm not sure of the model# I'm trying to decide if it is something I should...


if u try putting in ur question in google or youtube, with ur brand name and what u want to do? replace top panel in kenmore stove? u should get several results

Mar 05, 2015 | Kenmore Ovens

1 Answer

I Have A self cleaning stove Kenmore.When i want to clean and lock the door it will not start the cycle it shows door.?


There is a bad connection on the door lock to the sensor that detects whether the door is closed. Usually this means the door lock is broken, repairclinic.com will have a replacement if you find that this is the case. Let me know what you find.
Benjamin

Nov 04, 2010 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Accidentally pushed self clean on Kenmore stove with door open. now the door will not close.


Hello there:
on these units they have a self resetting device that you will need to activatethis is done by unplugging the oven for at least one hour then plugging it back in and wait for 5 min then press the normal cancel buton or you might even hear a click sound then you will be allowed to unlock it ok and close the door hope this helps you out please rate this solution it helps get better results for our customers like you
best regards mike

Jul 24, 2010 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Oven door won't close completely


You will probably have to replace the springs I doubt if they can ve fixed. you can open the door all the way and you will see a hole in the spring just inside the door. you can stick a nail in that hole, both springs that will hold the door open and you can lift the door out and check the springs I will tell you to have patience its not easy.

Apr 21, 2010 | Kenmore 47702 / 47704 / 47709 Electric...

1 Answer

No Grill operation for stoves 720ef


Supply an email address for you and I will grant you access to my BT Digital Vault where a copy of the complete handbook is lodged. It includes circuit diagrams.

With your fault, can you here the switch operating, if not it just may be stuck?

Dec 12, 2009 | Stoves 720EF Electric Double Oven

1 Answer

I own a Kenmore stove model #639539J2. The glass


yes. open the oven door to the first "click". it kind of stops about a quarter of the way open. most ovens you grab both sides of the oven door and pull up. some models have a couple of screws you have to take out before you can remove the oven door. then lay it down with the insie of the door facing up and take out all the screws holding the oven door together. some may be on the sides or the top and bottom of the door. when apart, clean first with easy off, then clean several times with windex till streaks are gone. assemble door in reverse and put back on stove.

Oct 10, 2009 | Kenmore Ovens

1 Answer

Digital screen goes off oven will not work stove top is working fine


The "digital screen" is connected to the electronic control board which controls the oven (the surface elements on the stove top will not be affected by this problem). The "flickering on and off" could be any connection that feeds the electrical supply of the control board. Like something in the wiring harness that feeds the relay board, or the wiring harness that goes from the relay board to the electronic control board. It could also be the relay board or the electronic control board themselves. To isolate the problem you would need to check electrical supply to each board at the time of the "problem" when the "digital screen goes completely off." This would tell you where you "have" the voltage and where the voltage supply is lost. If it is a loose or burned wiring harness replace the harness or individual wire causing the problem if it turns out that it is the relay control board or electronic control board replace them. The relay control boards are typically around $75.00 and the electronic control board $150.00 and up. Might be cheaper to purchase another used oven or bite the bullet and buy a new range.

Nov 29, 2007 | GE Profile JTP18 Electric Single Oven

2 Answers

Problem with Kenmore Electric stove


I have kenmore stove mod.790-95660103 you turn on any top burner . T he small one inside the big burner comes on Roy

Nov 24, 2007 | Kenmore 40494 / 40495 / 40499 Electric...

Not finding what you are looking for?
Maytag CWG3100A Gas Single Oven Logo

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Ovens Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Maytag Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...