Question about Projection Televisions

1 Answer

I have a viore monitor ipt46dl30 which just went black but we can still hear the voice.. help?

Posted by on

  • 1 more comment 
  • Anonymous Feb 18, 2009

    I have the same problem, I ordered a replacement lamp (found one for 150$ including shipping) and I'm waiting for it to arrive, but I'm pretty sure the problem is the lamp

  • Anonymous Apr 15, 2009

    I HAVE THE SAME PROBLEM , WHAT I CAN DO ? DID YOU FIX IT WITH THE LAP AND WHERE CAN I BUY THE LAP?

  • Anonymous Apr 15, 2009

    Where did you buy the lamp for 150$. Is it a website? Plz forward the link

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I'm in the process of ordering a replacement bulb for a friends set right now. The information below is exactly what's needed to get the correct bulb for this DLP television.

TV Make: Viore

TV Model: IPT46DL30 (Confirmed to be on TV label)

Bulb/Lamp Model: SHP70 (This number is right at the top of the bulb/lamp, where the wires connect)

Housing Model: 140-1027 (This is also known as the Ballast which houses the bulb/lamp)

Now, I've managed to locate the bulb/lamp from a few different sites. Unfortunately, there doesn't appear to be a reputable manufacturer making aftermarket bulbs for this DLP model. The original bulb type is all we have to look forward to. The cheapest price that I've found so far is $120.00. I have also found these particular bulbs for as high as $295.00. Needless to say, I'm going with the former.

http://www.replacementlightbulbs.com/lampshp70.html - $120.00 (Buying)

http://purelandsupply.com/140-1027-Bulb-Akai-DLP-TV-Lamps.html - $277.90 (Too much)

http://www.encompassparts.com/products/?140-1027 - $295.00 (Too much & very skeptical)

Posted on Jul 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

VIORE DLP goes off 30 seconds after i switch it on


Listen closely at the rear of the set for any noise from a fan. Most projection sets have them to cool high temperature areas common in these and if the fan fails, the set will shut itself off before any heat damage results. If you hear nothing, use a portable fan directed at visible openings in the lower cabinet and see if this delays the shut-off of the set. If so, the fan is likely dead.

Jul 30, 2011 | GRY Viore RPT50V24DHD 50" HDTV DLP TV

1 Answer

My 50" Viore DLP Television has white dots showing


Bad Light Engine/Optical unit Assy Block
Encompass Parts Distribuiton 1-800-638-3328
UED 1-800-648-6657

Dec 14, 2010 | GRY Viore RPT50V24DHD 50" HDTV DLP TV

1 Answer

VIORE TV IPT46DL30 shows no light but power ins going to set??? is there a reset putton???


This tv has no serviceable fuses inside. You may need to replace the power supply module.

Nov 08, 2010 | Akai PT46DL10 46" HDTV-Ready Television

1 Answer

My viore tv wont stay on it keeps going off by its


Ur tv the projection lamp,inside the tv now,been on an in used about 4 or 5 hours a day,the bulb been inside tv about 1 1/2 or 2 years?The projection lamp life is over,reqiure changing?Turn tv on hear alot of clicking too?The board call the Ballast board also require changing too,this Ballast board help to ignite the projection lamp.

Jul 24, 2010 | GRY Viore RPT50V24DHD 50" HDTV DLP TV

1 Answer

Ipt46dl30


Try Ebay or partstore.com

Jun 09, 2010 | Akai PT46DL10 46" HDTV-Ready Television

1 Answer

I have a 46' viore ipt46dl30 and when it turns on all the screen is really flickery. and most the colours come up purple, but this goes away for about 5 ten minutes and the flickery purple screen comes...


Viore ipt46dl30
Same problem, cleaned color wheel, put a few drops of wd40 on bearings, worked good for two months.
Started flickering again, need to replace color wheel.

Feb 03, 2010 | GRY Viore RPT50V24DHD 50" HDTV DLP TV

3 Answers

Need the dish network code to Viore tv


Viore is a generic of Samsung brand TV's. Try using their list of codes, the code for mine was 0085. Hope it helps 8-)

Nov 14, 2009 | GRY Viore RPT50V24DHD 50" HDTV DLP TV

1 Answer

Set up code for viore tv remote.


Did you try conyacting allforone to get the code or an alternate method to enter the code by scanning ?

Dec 30, 2008 | GRY Viore RPT50V24DHD 50" HDTV DLP TV

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...