Question about Frigidaire GLCS378DB Dual Fuel (Electric and Gas) Kitchen Range

1 Answer

Replacing burner grate

Can the burner grates be replaced with the new "full top" grates like the newer models? I like the look of the full covered grates and they would allow us to slide pots off the burners to cool.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 131 Answers

Go to the store and look at them side by side. Try to put the grates from the one machine on the other. No book or manufacturer will tell you if they are interchangable. They want you to but the more expensive stove - not to upgrade your burners!

Good luck!

Posted on Mar 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need 4 Creda stove top range burners that are 7.25 inches round with 2 sides being square on each burner.


Creda Cooktop Product Support ' ManualsOnline.com

kitchen.manualsonline.com/support/creda/cooktop/
my gas cooktop was continually clicking and smoke ... i am looking for the manual fora creda colonial t ... Creda glass cooktop GH100, need a burner ignition.

Creda Spares, Parts & Accessories

www.4creda.co.uk/
We have parts for the full range of Creda models, so we're sure to have the part you ... Get the best performance from your Creda cooker hood with our range of ... fan oven elements, replacement control knobs, door gaskets and oven hinges.

CREDA GAS Cook Top Cooktop 4 Burner White 30" x 20 ...

bellingham.craigslist.org/app/5414687535.html Craigslist Inc.2 days ago - CREDA GAS Cook Top Cooktop 4 Burner White 30" x 20" HIGH ... make / manufacturer: CREDA ... The grates have some cosmetic chipping.

Jan 25, 2016 | Creda Kitchen Ranges

1 Answer

Lofra service perth


Instructions
    • 1 Disconnect the range's power supply, either by turning off the breaker in your service panel, or unplugging the range from the wall outlet.
    • 2 Remove the burner grates, burner caps and burner bases. On some ranges, the burner bases are secured using screws, which you must remove.
    • 3 Insert a putty knifeicon1.png into the gap below the front of the each side of the range to release the spring clips securing the top to the range.
    • 4 Lift the top, and then have a partner hold the top up. If you are repairing the range alone, place a sturdy object under the top to secure it.
    • 5 Remove the burner orifice containing the igniter that you are replacing.
    • 6 Remove the screw securing the igniter to the underside of the orifice, and then remove the igniter.
    • 7 Pull the igniter wire off of the terminal, and then discard the igniter.
    • 8 Connect the igniter wire to the new igniter.
    • 9 Secure the new igniter to the underside of the orifice using the screw that you removed.
    • 10 Replace the burner orifice, and then secure it into position using the bolt that you removed.
    • 11 Lower the top onto the stoveicon1.png, and then press down to engage the spring clips.
    • 12 Replace the burner bases, caps and grates.
    • 13 Restore power to the range by plugging it back into the wall outlet or turning on the range breaker.


Read more: http://www.ehow.com/how_12064545_fix-ignition-switch-stove-top.html#ixzz2bSNNTBF9

Aug 09, 2013 | Kitchen Ranges

1 Answer

How do i re ignite the pilot light


Hi

The surface on this range have standing pilots that must be lit initially. To light them:
1. Be sure the surface burner control knobs are in the "OFF" position.
2. Remove the grates and cook top.
3. Locate the pilot ports and light each of them with a match. Replace the cook top and grates.

Light the oven burner pilot in the following manner:
1. Be sure the oven control knob is in the "OFF" position.
2. Remove the broiler carriage.
3. Hold a lighted match at the top forward section of the pilot (See diagram). No adjustment is required.
4. Replace the broiler carriage.
Hope this helps...
Daniel

Aug 28, 2010 | Magic Chef 31000 Gas Kitchen Range

1 Answer

Can not get top off how to work on gas surface burners


If you provided the correct model, you should only need to remove the grates to get to the burner caps. Just lift up, on some stoves you may need to slide one of the grates a fraction of an inch away from the other if the grates are in pairs on each side. Then you can lift off the burner caps, note the caps fit onto pegs and must be positioned correctly onto the pegs when you put them back and then the sealed burner units.The drip pans also just lift out. After those parts are out you are at the main top which has no clips or screws on the parts diagram. However the flue cover may block you from just lifting it up.

I hope this helps.

Cindy Wells
(http://www.appliancepartspros.com/partsearch/model.aspx?model_id=22014&diagram_id=663880 has detailed diagrams for the parts list.)

Aug 23, 2010 | Amana ARGS7650SS Gas Kitchen Range

1 Answer

Where can I locate the model number on my viking range? (48")


Mine was located to the left of the top burners. Remove the grates covering the burners, remove the 'spill' pans, lift up the surface that held the spill pans and then on the LHS you should see a plate with your units details.

Jan 20, 2010 | Viking 48" 6 Burner, Griddle Professional...

1 Answer

Slippery burner grates


hi thanks for the question i would contact the store you bought the new stove from and ask if they have a none slip grate thanks the appliance doc

Aug 25, 2008 | Tappan TGF320 Gas Kitchen Range

1 Answer

2001-2002 GE Spectra XL44 Gas Range Parts search


it is your lucky day.....I have 4 grates/burners in gray .....make an offer before I put them on Ebay.

May 17, 2008 | Kitchen Ranges

1 Answer

My range


The first thing I would do is call Frigidaire, should be a 1-800# in your manual and complain about the problem.  I had a customer today, in fact, that had a normal problem with his refrigerator.  It was from frigidaire, 3 yrs old, and they actually covered parts and labor 100%.  Some models, not sure if yours did, had a recall for this very problem and were replaced with grates that had a thicker coating.  Let me know how it turns out.  Would appreciate a solved rating for this advice unless you need further assistance.

Oct 19, 2007 | Kitchen Ranges

3 Answers

Cleaning and care for my GE Profile stovetop


The one thing I don't suggest is using the Ceramabryte product the dealer left with us. It leaves a greasy film. When I get ready to clean my black GE Profile, I pull off the controls to wash separately. Then I lift off the grates, take a single-edge razor blade to scrape anything stuck on (it doesn't scratch), then I use baking soda and scrub and scrub with lots of paper towels. Then I start cleaning off the baking soda with lots and lots more paper towels. There is still a film, but at least it's not greasy. At this point I grab some more dry paper towels, pour on a 3' puddle of rubbing alcohol and wipe it all over the stove top and front. You may have to do this twice. Then, if I don't turn on the hood light's brightest setting, it really doesn't look too bad. I have to do this at least once a week, as I have never had a stove that got so dirty so fast and was such a pain to clean.

FYI, I would never buy another of these stoves. Besides the cleaning issue, there is the fact of having to replace the igniter (glow plug?) twice in the first four years. My old, bottom-of-the line Magic Chef went 25 years with the first replacement not coming until it was about 15 years old. Also, the broiler is unimpressive and steaks, etc., just sort of steam. Can't get a really good crust going. It's a slide-in and the top is very narrow, front to back, because of the slanted control panel on the front, and so you really can't put two large pots or pans on one side. Let's see....oh yes, I ordered the unglazed grates for safety reasons and it came with the procelain glaze. Those were replaced free of charge, though I had to go pick them up. Then the first set of unglazed grates began to rust about six months into use, so had to be replaced (again, no charge at least). Recently I noticed that the inside walls of the oven, where the racks slide, are starting to rust. Finally, the burners are difficult to calibrate, which I really notice when I try to cook rice, which comes out right about 50% of the time.

Now, on top of all this, I have to worry about the glass door exploding?!?! Should I ban my grandchildren from the kitchen? Has anyone from Consumer Reports seen this website?

Feb 01, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
Frigidaire GLCS378DB Dual Fuel (Electric and Gas) Kitchen Range Logo

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...