Question about Directed Dei Valet 561r Remote Start/Keyless Entry

1 Answer

Lost Transmitter I need a replacement transmitter (clicker) for my Model # 561r Valet Remote Starter because I lost mine.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

I had a remote that didn't work and I found the 561r complete remote start system on ebay for $32.00 including shipping so I bought that and within 2 minutes had the new remote programed and now I have the main unit in case mine goes out also.

Posted on Oct 19, 2010

  • shoadelf Nov 30, 2010

    How did you program the new remote? I lost my remote too and need to program a new remote to work with my 561r system that's already installed. I'd like to do it on my own so I don't have to take it to the shop and pay a lot for a simple 5 min programming.

  • David Polly
    David Polly May 07, 2011

    I just did a search online for the manual and it was very easy. sorry it took so long I didn't get a notification that I had a question

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I lost my keyless for my remote started valet 561r now i bought the keyless and i don't know how can i program it can you help me with that....??? Thanks you....


turn the key to ON, then press and release the valet/program button once, then press and hold. The 561R LED will begin to blink. While you're holding down that button, press and release lock on the remote. Turn ignition off and try it out.

Mar 06, 2011 | DEI Valet Keyless Entry System

1 Answer

Need to know how or get instruction to program new auto page xt-100 oled remote starter.


REMOTE TRANSMITTER PROGRAMMING Enter: 1. Turn the Ignition 'switch 'OFF/ON' 3 TIMES and stay in ON position. Within 15 seconds. 2. Push the Valet switch 2 times and hold in on the 2 nd push, when a long chirp is heard then release the valet switch. You are now in the Transmitter programming mode. Program: 1. Press the Lock button on transmitter 1 until the siren responds on Car with a confirming chirp; the first transmitter is now programmed to Car. Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps will confirm exit. Note: If more than 4 transmitters programmed, the system will only keep the last four. The Valet switch is a little Red Push Button that should be mounted under the lower left side of you dash or in the lower left kick panel near the E-brake pedal.

http://www.autopageusa.com/resources/2%20Push%20transmitter%20PROGRAMMING13.pdf
This sis atndard programming for the 900,915,1000,and 100 units.

Feb 12, 2011 | RS1000 OLED 2Way OLED Remote Start w 6...

1 Answer

How to reprogram my remote for car


REMOTE TRANSMITTER PROGRAMMING Enter: 1. Turn the Ignition 'switch 'OFF/ON' 3 TIMES and stay in ON position. Within 15 seconds. 2. Push the Valet switch 2 times and hold in on the 2 nd push, when a long chirp is heard then release the valet switch. You are now in the Transmitter programming mode. Program: 1. Press the Lock button on transmitter 1 until the siren responds on Car with a confirming chirp; the first transmitter is now programmed to Car. Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps will confirm exit. Note: If more than 4 transmitters programmed, the system will only keep the last four.


http://www.autopageusa.com/resources/2%20Push%20transmitter%20PROGRAMMING12.pdf

Dec 28, 2010 | C3RS727LCD 4Channel Alarm with Remote Car...

1 Answer

My sister lost the directions for the remote..is it obtainable online?


Hi,

It is a great product and you have it from amazon at a discount from list price here

412pxkzowzl._sl75_.jpg Chamberlain KLIK1U Clicker Transmitter Universal Garage Door Remote Control Price: $16.75
List Price: $39.99
Cheers
TeaCii
If you own website, add live support almost free
Real security guard to watch your cctv for $1/day

Apr 22, 2010 | Chamberlain Clicker Universal Remote...

1 Answer

Theft deterrent system


Get the alarm removed.

Sep 24, 2009 | 1995 Toyota Camry

2 Answers

How would i program the valet 473t remote for a 2003 dodge ram 1500


Call DEI customer service at 888-425-8890. They make this remote.

Here'a a link to the Valet 561R user manual (which uses this 473T transmitter) too but it just gives basic operation info:

http://www.directeddealers.com/manuals/og/valet/G561R_07-05.pdf

Jul 02, 2009 | Directed 473T Remote Control

2 Answers

Vehicle lost fire


the security system doesn't disable spark, it works by not letting the fuel pump run or not allowing the starter to work, but never does it affect spark or fire as you call it.

Jun 16, 2009 | Directed Dei Valet 561r Remote...

1 Answer

Programming the APS02BT2 remote


TO PROGRAM ADDITIONAL TRANSMITTERS:
1. Enter the vehicle, and turn the ignition key to the "on" position.
2. Press and release the valet push-button switch three times.
3. The dash LED will flash once, and the siren will "chirp" once, indicating the system is ready to accept programming for channel 1 or the arm/disarm and panic functions.
4. You can assign any of the three transmitter button functions listed below to channel 1.
a. Pressing button #1 on the keychain transmitter.
b. Pressing button #2 on the keychain transmitter.
c. Pressing both buttons simultaneously on the keychain transmitter.
5. Press and hold the selected choice a, b, or c above, until the siren emits a long "chirp" to confirm that programming of channel 1 was successful.
6. Press and release the valet push-button switch one time.
7. The dash mounted LED will flash 2 times, and the siren will "chirp" indicating that the system is ready to accept programming for the unlock/panic channel.(If you desire one button to control lock & unlock, move on to step 9)
8. Press and hold the selected remaining choice a, b, or c above, until the siren emits a long "chirp" to confirm that programming of unlock channel was successful.
9. Press and release the valet push-button switch one time.
10. The dash mounted LED will flash 3 times, and the siren will "chirp" indicating that the system is ready to accept programming for channel2, or the pulsed ground output for remote trunk release, remote car starter, etc.
11. Press and hold the selected remaining choice a, b, or c above, until the siren emits a long "chirp" to confirm that programming of channel 2 was successful.
12. Press and release the valet push-button switch one time.
13. The dash mounted LED will flash 4 times, and the siren will "chirp" indicating that the system is ready to accept programming for channel 3, or the additional pulsed ground output if available on your model. NOTE: If the program switch is operated again, the circuit will recycle through the program mode. In other words, press 1 time to access the lock function, 2 times to access the unlock function, 3 times to access the start function. When programming is complete, simply turn off the ignition switch to exit the program mode.

ERASING TRANSMITTERS IF THEY HAVE BEEN LOST OR STOLEN: NOTE: Before you begin to erase the lost or stolen transmitter(s), have all transmitters available that you wish to remain programmed. These will be used during the program process to identify transmitters that will continue to be used.

Enter the transmitter program mode:
1. Turn the ignition switch to the “ON” position.
2. Within 10 seconds, press and release the valet/program switch three times. (Siren emits 1 short chirp indicating channel 1 has been entered)
3. Within 10 Seconds, press and hold the ARM or ARM/DISARM but-ton of the first transmitter you wish to remain stored into the control unit until a single chirp is heard from the siren.(Repeat this for each transmitter you wish to remain stored in the control unit).The receiver stores up to four transmitters. To be certain all transmitter slots in the receiver are occupied with transmitters you wish to continue to use, and all others are erased, you will have to fill all four receiver slots. If in step 3 you identified one transmitter, you will have to fill the additional 3 slots. If in step 3 you identified two transmitters, you will have to fill the additional two slots, etc...
4. Press and hold any unused button or combination of buttons until a long chirp is heard from the siren. Release and press the button or button combination again and again until all remaining slots are full. NOTE: The button or combination of buttons entered will also control the armor arm/disarm function until additional transmitters are added. All unwanted transmitters are now deleted.

Feb 28, 2009 | Car APS02BT2 Transmitter for...

1 Answer

Need to program autopage 5b remote


Note: This mode will only retain the last 4 remote transmitters programmed. If the transmitter memory is exceeded,
the security system will start deleting transmitters from memory in chronological order.
1. Turn the Ignition 'switch ‘OFF/ON’ 3 TIMES and stay in ON position. Within 15 seconds.
2. Push the Valet switch 3 times and holding in on 3rd push until a long chirp is heard then release the valet switch.
You are now in the Transmitter programming mode.
3. Press and hold any button of the transmitter until the siren responds with a confirming chirp, indicating the signal
has been stored into memory.
4. If you have additional transmitters (up to 4) that need to be programmed, repeat step 3 for each transmitter.
Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps & 3 parking
light flashes will confirm exit.

Feb 17, 2009 | Megatronix - TW71 - 5 Button 2 Way LCD...

Not finding what you are looking for?
Directed Dei Valet 561r Remote Start/Keyless Entry Logo

405 people viewed this question

Ask a Question

Usually answered in minutes!

Top Directed Car Audio & Video Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Directed Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...