Question about PC Desktops

2 Answers

- CD in header and - AUX in header

Hi,
and thank you a lot for answer.
I have another question for youis about the connection cd-Rw and DVD-Rw to motherboard (audio connection), it is necesarry to conect this cable to moatherboard or not? I cav DVD-RW and another one CD-RW, i already conected the DVD to CD in header and the CD to AUX in header.
Thank you again for help!!!
Florin.

Posted by on

  • Florin_7310 Apr 02, 2008

    From some time my PC give to me an error message, something CPU amd athlon error adress0X0000, into an error window (befor say to send to microsoft error raport). My pc is CPU Intel celeron D, why say about AMD athlon? before i have Intel celeron D i have AMD CPU This is the reason about this error message? this message it is show to HP Digital imaging Monitor , sometimes to MY computer , to Yahoo, why?

    Help me with this , too, Please.

    Thank you

×

2 Answers

Hi !

I have another problem with a DVD-rw LG, normaly burn DVD's R-5 8X or 16X in 7 - 8 min. Today start to write this DVD's in 40min(I have Nero 7). What is the problem with my DVD-RW?
Thank you for help.

Florin.

Posted on Apr 18, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 44 Answers

Hello Again,

No. Its not mandatory for the cables to be connect to the computer mother board....
No big Difference.... :)

Please submit your rating to help me improve my statistics and Performance...
Thanks & Reagrds

Posted on Apr 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can I use an internal SATA DVD+RW drive with the HP DC5100 ?


Hi as long you have sata connector in your pc you can swap cd with hdd or any other device that use that type connector. Regards

Oct 11, 2012 | HP Compaq dc5100 Small Form Factor PC...

2 Answers

When in ''MY COMPUTER'' - CD Drive (E:) was droped into DVD-RW (D:


Try uninstalling the drivers in device manager, shut down, reboot and Windows should find both devices, it might ask for your windows disk to install drivers or search online to install them

Jul 27, 2009 | PC Desktops

1 Answer

CD/DVD Drive will not read cd cd/rw or dvd/rw's


Goto the web site of the company that makes the writer and reinstall or update the internal Firmware for that model of writer.

Jul 02, 2009 | PC Desktops

1 Answer

Acer aspire l100 dvd problem


your DVD ROM's lens has became weak.
and it cannot be repaired.
But if you manage to open the DVD ROM clean the dust in it & it will start working agaain but be careful remember that no power should be attached to ROM.
pls rate me
thankyou

Feb 14, 2009 | Acer Aspire L100 PC Desktop

2 Answers

My Samsung Octoedge CD RW is not detecting CD ROM s


* check the cables (cd w\r cable,powercable)wheather it is connected properly by opening the case

*change the ide cable (cd w\r cable) with new one or other

*connect ur cd w\r in different machine see wheather it is working

*see jumper settings in hdd it should be master and cd w\r should be slave

*restart ur machine

Jun 25, 2008 | PC Desktops

2 Answers

Looking for.....


You will need a low profile dvd. Do you want a part and vendor?

Worldvet

Jun 21, 2008 | HP Compaq Business d530 Ultra-Slim PC...

1 Answer

CD in header and AUX in header


hi again
This is most likely not required on your setup since your equipment is newer. you can find more information about this here: http://www.pcmag.com/encyclopedia_term/0,2542,t=CD-ROM+audio+cable&i=39413,00.asp

I still prefer using the analog audio cable on CD/DVD drives on slower older computers

Mar 31, 2008 | PC Desktops

1 Answer

DVD and CD RW Driver are not working


You might have knocked the cable our when installing the extra ram.

Take the cover off avail and find the cable that connects the motherboard to the first drive then then the second.

Push it in firmly at all 3 connections

If this doens't work try removing the ram and rebooting - see if your drives come back

Mar 07, 2008 | Dell Dimension 8250 PC Desktop

1 Answer

I need help getting dvd+rw drive operating


hi
go to nearer computer sales and support centre purchase a DVD R/W and if u have CD drive dis connect power cable and data cable then remove screws from cd drive then remove it fromyour cpu cabinate in same place insert your DVD R/W fix all screws,data cable and power cable.then connect all the data/power in backside of cpu if you r removed before otherwise again check all the cables and power on your cpu/moniter.after booting sucessfully your computer insert your nero cd which is given with your DVD R/W,cd automatically open then setup it one by one by soing instructions.after setup complete your DVD R/W is ready to read write CD/DVD.
thanks

Nov 12, 2007 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

1,973 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...