Question about Oreck XL Ultra Bagged Upright Vacuum

2 Answers

Wiring Schematices Hello, Thank you for posting the wiring schematics on FixYa. Those are the ones I needed. However, I cannot make them out on the webpage. So, if you could kindly send me a copy to my e-mail address, it would b highly appreciated. Prefferably in .pdf format if possible. Thank you very much. Desperate To Repair Kent

Posted by on

  • 1 more comment 
  • Rick Palmer Apr 04, 2008

    I need to get a wiring digram for an Oreck XL2, any help would be greatly appreciated

  • neet55 Aug 25, 2008

    We need to connect the motor to the oreck XL vacuum but we are having problems trying find out where all the wires go.

  • joeandconnie Sep 13, 2008

    I need the wiring schematics for replacing the motor on my Oreck XL. Thanks.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 3 Answers

I had the same problem after not paying attention to the connections when replacing my motor. I spent days searching for information and only found several non-answers with small photos that no one can read.I contacted Oreck for wiring information. They explicitly stated that they can't provide any wiring information for safety and liability reasons.

I found the Ametek schematic which shows the LINE and TAP locations on the motor.

Note: I have a 2600HH XL with 2 headlights.

Connect as follows:

3A, LINE: White lead w/piggy back terminal from light harness #1 & white lead from the power harness to the piggy back terminal
2A, TAP: Black lead from light harness #1
3B, LINE: White lead w/piggy back terminal from light harness #2 & black lead from the power harness
2B, TAP: Black lead from light harness #2
Wiring Schematices - 0d8cd9ff-8942-4773-a1fa-32c87905b735.png

Posted on Oct 02, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 310 Answers

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=19810&thid=479491

Wiring Schematics (by 2 users)
Posted by KentDW62 on Mar 31, 2008
Hello, Thank you for posting the wiring schematics on FixYa. Those are the ones I needed. However, I cannot make them out on the webpage. So, if you could kindly send me a copy to my e-mail address, it would b highly appreciated. Preferably in .PDF format if possible. Thank you very much.
Desperate To Repair …..Kent




X
This Problem has been added to the Share Your Expertise Page under "My Work Queue".
OK
1 Other User Has the Same Problem Comment by Rick Palmer, posted on Apr 04, 2008. I need to get a wiring diagram for an Oreck XL2, any help would be greatly appreciated Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Oreck XL Ultra Bagged Upright Vacuum. The best place to get an owner’s manual is from the Oreck Factory of which I will supply for you listed below or you can download the owner’s manual from the Oreck Website. . I would check with your local Oreck dealer or vacuum dealer in your area to see what is going on. This is most unusual for this to happen. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.oreck.com/ Customer Service 1-800-989-3535
Monday thru Friday Hours are: 7:00 am to 7:00 pm CST
Saturday and Sunday Hours Are; 8:00 am to 4:30 pm CST
http://www.a-1vacuum.com/ 1-800-657-1874 Customer Service
Thanks, Don the Vac Man
Go Ahead. Use Us.


Posted on Jun 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring schematic oreck orbiter


Would you please email me the wire diagram for the Oreck Orbitor xl floor machine? I had to bring it on a plane, which meant that the handle had to be removed. We need to know where the blue wire goes. Thank you!

Apr 28, 2014 | Oreck Orbiter Floor Machines ORB-500,...

1 Answer

Need wiring schematic for ametek 119550


I had the same problem after not paying attention to the connections when replacing my motor. I spent days searching for information and only found several non-answers with small photos that no one can read.I contacted Oreck for wiring information. They explicitly stated that they can't provide any wiring information for safety and liability reasons.

I found the Ametek schematic which shows the LINE and TAP locations on the motor.

Note: I have a 2600HH XL with 2 headlights.

Connect as follows:

3A, LINE: White lead w/piggy back terminal from light harness #1 & white lead from the power harness to the piggy back terminal
2A, TAP: Black lead from light harness #1
3B, LINE: White lead w/piggy back terminal from light harness #2 & black lead from the power harness
2B, TAP: Black lead from light harness #2

9f6a42fa-778c-4d92-87ed-8fafaf1adc57.png

Dec 13, 2012 | Vacuums

2 Answers

Hoover model u5753960 shows a photo on Sears Parts Direct of part number 42259027 (housing) with a separate spring and a separate screw. Does anyone know where those two parts are supposed to go ?


Hi,

I have a this link where you can get the manual for assembling your Vacuum, click the link to be directed to the website where the servie manual can be downloaded for the assembly instructions that you need for the parts.

I hope this helps.

Have a nice day,

mvincentc

Sep 12, 2011 | Hoover U5753 Bagless Vacuum

1 Answer

Need wiring diagram for Rainbow D4C vacuum to install rocker switch


You can get a wiring diagram at http://www.rainvac.com/schematic.html

You can get all of the manuals, and the full breakdown schematics, of every model there.

If you need me to tell you which wires go where, exactly on the switch, let me know. I am a Rainbow vacuum expert and know everything about almost every model ever made.

If you have any more questions, let me know.

Thank you,

Feb 20, 2010 | Rainbow Technologies D4 Bagless Vacuum

1 Answer

XL2525 changing motor


http://geeksquad.fixya.com/ThreadView.aspx?prdid=19810&thid=723450
XL2525 changing motor
Posted by geoffjackie on Jun 30, 2008
Please forward the wiring instructions for changing the motor in my Oreck XL 2525

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You can contact the Oreck factory for the wiring instructions but you need to give them the model # and the serial # if needed and I will supply you with the Oreck website and the cust serv phone # listed below. Also, you can check the owner’s manual and sometimes there is a schematic that shows you if information you need for changing the motor. . So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.oreck.com/ Customer Service 1-800-989-3535
Monday thru Friday Hours are: 7:00 am to 7:00 pm CST
Saturday and Sunday Hours Are; 8:00 am to 4:30 pm CST
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 30, 2008 | Oreck XL Ultra Bagged Upright Vacuum

1 Answer

Oreck Orbiter


http://geeksquad.fixya.com/ThreadView.aspx?prdid=618779&thid=681757
Oreck Orbiter
Posted by eccott on Jun 18, 2008
Hi could you e-mail me a wiring diagram for the Oreck Orbiter please? I need to replace the mains cable & the cable to the motor. Thank you, Helen Eccott.

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Oreck Orbiter Floor Machines ORB-500… you can contact the customer service line / tech support @ the Oreck Factory that I will list below for you and they will be happy to help or assist you in the wiring diagram, please include the model # and serial # with your request. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.oreck.com/ Customer Service 1-800-989-3535
Monday thru Friday Hours are: 7:00 am to 7:00 pm CST
Saturday and Sunday Hours Are; 8:00 am to 4:30 pm CST
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 18, 2008 | Oreck Orbiter Floor Machines ORB-500,...

1 Answer

Fantom Cyclone wiring


Hi,

The only sure way recommended (and probably the safest) would beto get a service manual or at least a schematic diagram. The FantomCyclone XT was originally manufactured by Fantom Technologies, Inc.that closed in October 2001. The replacement for a Fantom Cyclone XTwould be Westinghouse Wired Deluxe Edition (either a WST1550 or a WST1551). These replacement products are now handled by Salton Inc. Perhaps you may inquire from them:
  • Salton Inc.
  • 1 800 616 8689
  • salton@saltonusa.com
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Jun 08, 2008 | Fantom Vacums Cyclone XT Upright Vacuum

1 Answer

Wiring Schematic


Hope this will help you. There is 4 different ways to hook it up depending on what you have,

a2d7801.jpg

Mar 14, 2008 | Vacuums

Not finding what you are looking for?
Oreck XL Ultra Bagged Upright Vacuum Logo

941 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oreck Vacuums Experts

Ryan S
Ryan S

Level 2 Expert

328 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you an Oreck Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...