Question about GE Profile Harmony DPGT750EC Electric Dryer

1 Answer

My GE Profile Harmony dryer wont dry clothes

My dryer has power and drum turns you can feel some heat but yet it wont dry clothes. We have checked vents and nothing is plugged up

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

I finally had a GE authorized tech come to our house, because we've had the same problem on and off for about 2 yrs. Our's is 5 1/2 yrs old, and the problem was the blower motor, which is hard to get to, and the nut holding the fan in place is also put on going the "opposite" direction. (So lefty loosey, righty tighty doesn't work for this one) The Tech told me in all his years he has never replaced a heater in any of these, and it has 2. The usual problem is the blower motor has gone bad. It's working great now, and it was $470 to fix, but still cheaper than a new one....

Posted on May 16, 2010

  • Jeff Abel
    Jeff Abel Dec 10, 2011

    think i have same problem barely any air flow

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My GE Profile Harmony dryer won't dry. The drum is turning but the clothes just won't dry. Circuit breaker is not tripped.


Frequently there's an obstruction in the vent duct from the dryer to the outside of the house. For the dryer to heat properly, the duct must be clean and clear of lint or any other substance. Your dryer has some internal ductwork. If it gets clogged, your dryer can't dry properly. In most dryers, to get to the internal ductwork to clear the clog, you have to substantially disassemble the dryer. A quick way to check for internal clogs is to remove the lint filter and use a flashlight to inspect the inside of the duct.

Dec 01, 2010 | GE Profile Harmony DPGT750EC Electric...

1 Answer

The dryer heats on and off. Sounds to be laboring to turn the drum. Service tech came out and did not know how to fix or approach the problem with why the dryer heats and dries a load and then may not on...


drum roller,drum glides, or idler assemblage which is located next to motor(might be motor going out). Here is a website that will help:

for glides/roller: http://www.partselect.com/dryer+dryer-tears-clothes+repair.htm

for idler/motor: http://www.partselect.com/dryer+dryer-wont-tumble+repair.htm

Nov 29, 2010 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE profile electric dryer, sounds like something is stuck in drum


Heating problem is most likely caused by one strand of your heating element is burned out. Heating element will have to be replaced if that's the case. Noise you are hearing is most likely coming from worn front and / or back bearing. Dryer has to be completely disassembled for either repair.

Aug 28, 2017 | GE Profile Harmony DPGT750EC Electric...

1 Answer

The blower and heat are not working my ge harmony electric dryer


If blower isnt working you wont feel any or very little heat in the drum

Aug 19, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Profile Harmony Dryer Drum will not turn


the inertia switch on the shaft of the drum motor has failed This will require removal of the drum motor

Jun 01, 2009 | GE Profile Harmony DPGT750EC Electric...

2 Answers

GE Profile Harmony dryer error message


Possible Solution...
When you get message first try turning off. Open door spin drum one or two times. Close door. Power back on/start.
Works for our problem. Post if this helps.

Oct 29, 2007 | GE Profile Harmony DPGT750EC Electric...

Not finding what you are looking for?
GE Profile Harmony DPGT750EC Electric Dryer Logo

972 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

JP Services
JP Services

Level 2 Expert

310 Answers

Cindy Wells

Level 3 Expert

5184 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...