I have a lorex mini color diy camera with ir model# 6184. i have nothing else that came with it. It has 4 wires redblackgreenand yellow. How do i wire a/v and power to it?

Sorry those diagrams are not published to the web.

I have no idea what it is you need to know??

Mine has a yellow,green,black and red wires which one is the audio,visual,positive or ground
my email is [email protected]

Make sure it is not in a really shaded area. If the camera does not see enough light, it will stay in black and white mode. If that is not the issue, you might want to contact Lorex directly with the Camera model number.

This camera demands a 9V DC 200mA. Not 12V.

The RED wire is your 12 volt power "positive". The BLACK wire is your 12 volt power "negitive" The YELLOW wire is your camera video. The white wire is your cameras audio & the copper wire is shielded ground.{Davesajak}

Lorex Corp SG6184S Weatherproof Mini Color Security Camera with Night Vision,where can i download manual,wanting to set it up to my vcr and clueless how this is done,i have camera's yellow white cables in tv[video/audio but unsure how to connect or what to do so i can record from vcr,please specifies

you need power to the red and black, white to a rc plug center pin yellow to the center pin of a rc plug and there should be a bare wire you need to split it off to the outside section of the yellow and white rc plug

I HAVE A SECURITY CAMERA GOT WITH THE WIRES RIPD FROM BACK OF IT 4 WITH WIRES 1 RED 1 WHITE 1 YELLOW AND 1 THICK BLACK WIRE HOW CAN I REWIRE IT?????