I AM HAVING A PROBLEM WITH MY SONY.THE DISPLAY WONT ON. ONLY THE STANNDBY LED & WOOFER LED WOULD DISPLAY.WHEN I TURNED THE POWER SELECTOR TO 110V THE WHOLE SYSTEM WORKED PROPERLY EXCEPT FOR A HUM NOISE AND TOO BRIGHT DISPAY & THEN GOT MY PLUG FUSE BLOWN.BUT THE SYSTEM WONT ON IN 220V SELECT WHICH IS THE ACTUL POWER RATING IN OUR COUNTRY-INDIA.... PLEASE DO HELP ME........
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
some important steps
1)check speakers & components connected correctly
2)check that MASTER VOLUME control is not set to VOL MIN
4)may be protective device may be activated to prevent short circuit
With the home theater system off, press and hold the REMAIN button on the home theater's remote control for 5 seconds. Note: You can release the REMAIN button when the POWER LED blinks blue.
With the wireless module turned on, use a ball point pen to press the RESET button on the back of the wireless module. The POWER LED in the front of the home theater blinks two times.
Turn on the home theater. The LINK LED on the front of the SWA-3000 changes from red to blue, indicating the wireless module has connected to the home theater.
If your home theater continues to display rear check after you have tried the steps above, call Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864). Have your model number and serial number on hand to set up service.
I'm having the same problem. It seems that the mosfet's shorted blew up a capacitor and took some surface mount parts with it. It will be the middle board with the metal shroud (shield). The mosfets are almost impossible to find, I have replaced them (as well as other parts) but still have yet to find the problem. I'm now trying to find the subwoofer amp board (part#LVA10505).