Question about Kenmore Elite 45986 Front Load Washer
Posted by Anonymous on
F35 is a water level error.
The water level switch (pressure switch) has malfunctioned.
If you remove the top panel, three screws in the back, you will have access to the pressure switch.
With the tub empty, remove the vinyl hose from the switch and blow backwards through the hose to clear any restrictions.
If the fault codes return after doing this, you will likely need to replace the pressure switch.
Also - please be sure to use He soap.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.*(&^%#
Posted on Sep 26, 2010
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 18, 2012 | Kenmore HE5t Steam 4.0 cu. ft. Front-Load...
Welcome to FixYa
F35 error means that there is some sort of issue with the steamer electronic board and analog pressure sensor has gone bad. Check that the hose is firmly attached with the washer and is not blocked. You can also check the water level pressure switch operation. Please get back to me if you have any other questions.
Feb 27, 2011 | Kenmore Elite 45986 Front Load Washer
May 10, 2010 | Kenmore Elite 45986 Front Load Washer
May 02, 2010 | Kenmore Elite 45986 Front Load Washer
Mar 25, 2010 | Kenmore Elite 45986 Front Load Washer
Jan 17, 2010 | Kenmore Elite 45986 Front Load Washer
Nov 22, 2009 | Kenmore Elite 45986 Front Load Washer
Nov 04, 2009 | Kenmore Elite 45986 Front Load Washer
Aug 25, 2008 | Kenmore Elite 45986 Front Load Washer
Nov 19, 2015 | Kenmore Elite 45986 Front Load Washer
235 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: