Question about E-Machines eMachines W2686 PC Desktop

1 Answer

I have an Emachince W2686 and I need a face plate for it. The button got stuck and it pulled the wires completely off the back of it. What do I do to fix this problem?

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • E-Machines Master
  • 5,660 Answers

Pulled the wires off of just the Power On switch? http://www.directron.com/atxswitch.html

(Goes inside the Power On button)

Or did you pull ALL the wires off of the Front Panel? (Also known as Front Bezel)

The eMachines W2686 uses a NexGen computer case.

http://www.e4allupgraders.info/dir1/ecase/support/ecase_identification.shtml

Is this NexGen Front Bezel like yours?

http://www.alancomputech.com/asem101152bz.html

Posted on May 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my problem is with the dvd tray it does not open . it make a funny noise but it does not open thx


OK I fixed it. One of the CD's had gotten stuck between trays in the loader. I pulled out a few CD's by forcing open the trays gently. However even after removing as many cd's as possible one was still stuck. 1. Remove screws holding cover plate on in back and sides. 2. Remove cover. 3. Lift face plate latches and lift over top of unit. Remove serial cables from connectors on board. Take face plate and place aside. Remove screws from back of CD tray unit and bend back metal tab with flathead screwdriver. Lift CD unit up on one side so you can get your fingers up inside underneath and push stuck cd towards tray openings. You can gently force top few trays out. You may need to shake unit so that stuck cd reaches open end. Pull out CD. 4. Replace faceplate and connect serial cables. Plug in power cord, power on unit and make sure trays will eject normally. 5. Put it all back together!

Jan 31, 2011 | Panasonic SC-PT660 Theater System

1 Answer

We have a dymo labewriter that has a label jammed in the roller. Part of the sticky part is stuck on the roller. Cannot be pulled through. What to do?


LabelWriter Label Jam
  1. Unplug your LabelWriter.
  2. Remove the spool and labels.
  3. Remove the face plate.
    • Note: The face plate is the piece with the DYMO name/logo.
  4. Using the paper release lever on the left side of the printer, move the print head away from the feed mechanism.
  5. Straighten out a paper clip and GENTLY cut away at the label caught in the printer.
  6. Using caution, begin removing the label.
    • Note: We recommend using tweezers to remove the jammed label.
  7. Reinsert the face plate back on the LabelWriter. If you need assistance reinserting the face plate:

https://dymo.custhelp.com/app/answers/detail/a_id/278/session/L2F2LzEvc2lkL2ZVOGZXRmlr


Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe

Dec 28, 2010 | Dymo Office Equipment & Supplies

1 Answer

I can not get off the face plate of my lock, i


The 2 screws in the back on the lever side and the one screw below under the button, If it is stuck with paint, whack it with a hammer.It doesn't twist off, it should pull straight out. Check it out.

Jul 03, 2010 | Schlage FE365-CAM-ACC Aged Bronze...

2 Answers

Just installed an XDM7615 Dual stereo and the face plate won't detach. Can anyone help? The manual says there is a button behind the face when it's in the 'eject' position but pushing this button does...


There are 2 very small screws on the back of the face plate that need to be removed. Once these are removed, you may then remove the face plate.

Feb 10, 2010 | Car Audio & Video

1 Answer

Replaced my battery noew my pioneer cd player won't work is there a reset button?


pull your face plate completely off, look for a small indented hole that you can fit the tip of a pen in. note(its not on the back of the face plate) on the actual head unit. make sure while doing this that your vehicle is started or at least in acc position

Aug 05, 2009 | Pioneer DEH-P4700MP CD Player

1 Answer

Face plate wont light up but power is getting to it


make sure face plate is firmly put in place with no obstructions hindering the circuits behind face plate

May 20, 2009 | Car Audio & Video

3 Answers

A dvd is stuck in my Chrysler town and country multi disk dvd/ cd player. How do I remove it?


Look around the face plate for a very small hole...use a straightened paperclip or equivalent and press in a few inches...its a manuel door release and you should gain access to at least the loading tray.

Apr 24, 2009 | 2005 Chrysler Town & Country

1 Answer

Face plate buttons wont work


This is actually a common problem with more than just that radio. Sometimes the pins on the back of the face plate need to be cleaned. Take the face plate off, take a Q-tip and dip it lightly in some rubbing alcohol. Then use that to clean the metal pins on the back of the face plate. Make sure it is completely dry before you place the face plate back on. If this does not work, your better off replacing the whole thing.

Jan 20, 2009 | Alpine CDM-7874 CD Player

1 Answer

Faceplate


if the random button is stuck its the caue of your problem because if you hold one button pressed the others wont work.

on the back of the face plate there are 4 little screws take them out and see what is holding that button stuck or pull it out if you can ...

Sep 03, 2007 | Panasonic CQ-C5310U CD Player

Not finding what you are looking for?
E-Machines eMachines W2686 PC Desktop Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...