Question about Audio Players & Recorders

1 Answer

Will I need to use a pre-amp to connect my Sony ps 350 Direct Drive turntable to my computer?

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Audio Player... Master
  • 5,011 Answers

You could use the tape imput/output on an amp to connect to your computer, if you have an amp for playing back the deck. Then ALL sound will either playback or record from amp to computer and your computer can playback on your amp.
If your computer uses 3.5 plugs for sound connections get these converter leads:

Will I need to use a pre-amp to connect my Sony PS - 4c43d20.jpg

Posted on May 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do you need a pre amp ? to connect a sony lx56p to a amp


I have been told by another user to connect the the black thin lead whith the square end to the earth of the amp or a receiver. I have not tried this soulution but you can give it a try.

Jun 07, 2014 | Sony Ps-lx56 / Ps-lx56p Stereo Turntable...

1 Answer

Sony ps-lx250H loud buzzing sound


That is where the problem is, get a long insulated wire, bare both ends and attach one end to the turntable and the ground screw of the amp, use one screw on the chassis on the turntable and bare the metal for good ground connection.

Jul 20, 2012 | Sony PS-LX250H Turntable

1 Answer

I have a Sony direct drive PS-X5 turntable. I have to turn the amp up all the way to hear any sound.


If you're not connecting the TT to a PHONO preamp or a receiver with a built-in PHONO connection the signal from it will be too weak to get any meaningful volume PLUS the RIAA equalization curve required for flat phono playback won't be applied so it will sound very 'tinny'.

Google it.

Get electronics that can handle old-school turntables.

Dec 27, 2010 | Sony PS-LX250 Turntable

1 Answer

PS-LX300USB Turntable: I have hooked up the sony turntable to laptop, but...


Have you though of using a pre-amp? You'll probably need to go turntable --> pre-amp --> soundcard input to get acceptable sound

May 11, 2010 | Sony PS-LX300USB Turntable

1 Answer

Hooking a turntable with it's own pre amp to a computer and/or a home theather system gemcquaid mcquaid@northlink.com .


Check your inbox.

Hook the output to Aux. As for your PC, that would depend on your sound card. Basically, the same.

Mar 01, 2010 | Sony PS-LX250 Turntable

2 Answers

Low volume on PS LX250h


This turntable has a built in pre-amp, under the platter is a on-off switch. Turn it to "on".

-Former PS-LX250H owner

Dec 12, 2008 | Sony PS-LX250H Turntable

1 Answer

I am trying to hook together a computer and a turntable(Turntable has its own pre-amp) & I need a diagram on what wire gos where?


OK. Since there is a pre-amp, all you need to do is to connect pre-amp output to Line-in input on the PC. This may be a bit of challenge as the connector on the pre-amp and computer are of different types. Usually, you need a cable with RCA connectors on one end and 3.5mm stereo pin (same pin as you have for stereo headphones) on the other.

Aug 17, 2008 | Sony PS-LX250 Turntable

1 Answer

SONY TURNTABLE PSLX22


You have to make sure your unit is connected to the PHONO INPUT connection on your receiver. If your receiver does not have a PHONO INPUT connection, then you will need to buy what's called a PHONO PRE-AMP - AVAILABLE HERE.

You connect the turntable to the Phono Pre-Amp, then you connect the Pre-Amp to the LINE IN or AUX IN of your receiver.

- Davis.
DIGITAL ANALOG THERAPY
www.repairnyc.com



Jul 05, 2008 | Sony PS-LX250H Turntable

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5011 Answers

The Knight
The Knight

Level 3 Expert

73591 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...