Question about Whirlpool GY398LXPS Electric Kitchen Range

1 Answer

Display shows E0 F2 after pressing start and cancel at same time. No other buttons work. Stovetop still works.

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

F2-E0 - Shorted Touch Pad (Keypad) - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure.
Select the 'cancel' function and wait 60 seconds.
If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Oct 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Display reads EO -F2- stove top works, oven will not


F2 - E0 Shorted keypad (also called touch pad) 1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).

Sep 14, 2010 | KitchenAid KERA205P Electric Kitchen Range

1 Answer

My kitchenaid keri203 is showing E0 in orange and F2 in blue on my oven display


F2-E0 - Shorted Touch Pad (Keypad) - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure.
Select the 'cancel' function and wait 60 seconds.
If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!@@

Aug 30, 2010 | KitchenAid KERI203PBS Electric Kitchen...

1 Answer

When I press my power button 3 or 4 time (on off) or some time more then display show in monitor. when I press 1st time then the pc start but no display show in monitor. when I off it and then again on it...


CHANGE CMOS BATTERY OF YOUR SYSTEM IT COSTS 10 RUPEES ONLY. ERRORS WILL GONE AFTER CHANGING THIS BATTERY. SYS WILL START IN SECONDS AND F2 ERROR WILL DISAPPEAR

Mar 29, 2010 | ASUS P4PE2-X Motherboard

1 Answer

Display shows E0 F2 after pressing start and cancel at same time. No other buttons work. Stovetop still works.


Hi, this error code indicates a shorted key on the touch pad.

1. Check keypad connector for firm connection also clean with a pencil eraser (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).

I you have any other questions please feel free to ask. Mike

Mar 25, 2010 | Whirlpool GY398LXPS Electric Kitchen Range

1 Answer

Kenmore Elite Oasis HE washer error code F2


The error code must be cleared first to make the machine back into operation. You have to press the PAUSE/CANCEL button twice to clear the error on the display.

The only filter the machine has is the one you removed to clean the pump. When the error is cleared, you can check the pump whether it is operating properly or not by running the diagnostic test.

Diagnostic Test Mode Procedure

  1. Close the door.
  2. Select the DRAIN/SPIN.
  3. Select NO SPIN by pressing the SPIN SELECT button.
  4. Press RINSE/HOLD or PREWASH OPTION button four times within five seconds.
  5. "C:00" will show on the display indicating that the door is locked and the diagnostic test starts.
  6. Press the button you pressed in step 4 above two times. "C:01" will show on the display and the machine starts to fill.
  7. Press PAUSE/CANCEL button two times when there's enough water inside the tub to stop the test.
  8. Observe the water level falls as the pump starts draining the water. Replace the pump if the water inside the tub does not drain. You have removed and cleaned the pump so you can easily replace it too.
Please inform me about the result of the diagnostic test and if you still need any assistance regarding this problem.

Jan 20, 2010 | Washing Machines

2 Answers

Whirlpool RBD245PDS15 Electrical wall double oven beeped .-... and showed F2 E6 code. Now it is dead other than interior light. No power surge, was not in use at the time. What is the code and how do I...


You to acces the electronic control and
1. Check keypad connector for firm connection.
2. Press CANCEL. If error code returns after 60 sec., replace keypad.
3. Replace control

Jan 06, 2010 | Whirlpool RBS245PDS Electric Single Oven

1 Answer

Code E0 and F2 with a little lock displayed on touch board of Whirlpool Gas Range. burners work but unable to operate the oven


You will need to press the cancel/stop button, this will clear the display and you will be allow to use the oven. If this does not work yoy will have to unplug the stove for five minutes and then plug back up and this should clear the display and allow the oven to work.

Nov 14, 2009 | Ovens

1 Answer

Oven not working Message E0-F2- showing


F2-E0 - Shorted Touch Pad (Keypad) - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure.
Select the 'cancel' function and wait 60 seconds.
If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question&&&&

Apr 20, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Whirlpool oven door won't unlock after cleaning


The motor that controls the door lock was bad. Go online and order a new motor based on range model number. User can fix if reasonably handy with tools.

Feb 05, 2009 | Whirlpool GR460 Electric Kitchen Range

1 Answer

Kitchenaid YKGRT607HS6


F2:E0 is shorted keypad, and F2:E1 is no keypad connection, you need to replace the keypad.

You can find schematics and find replacements by entering model number here.

Dec 14, 2008 | KitchenAid KGRA806PSS Gas Kitchen Range

Not finding what you are looking for?
Whirlpool GY398LXPS Electric Kitchen Range Logo

Related Topics:

323 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

Cindy Wells

Level 3 Expert

5105 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...