Question about Samsung HP-R5072 50 in. Plasma HDTV

1 Answer

Hp-t5054 "no input devices are connected"

Hi,
I just bought this TV last week. Now I am getting the above error message. I called Samsung and of couse, they were as helpful as a bottle of laxatives would be in remedying diarreah. I have purchased 2 seperate HDMI cords and have tested my cable on a regular TV. Any advice?

Posted by on

  • Anonymous May 23, 2008

    Having a similiar problem. My HP T5054 has been working on hdmi cable provided by verizon with their stb. It worked last night. When it was powered up this morning along with the stb the message "not supported mode" . Thats all it says in a pretty little box. The STB still outputs rs170 and havent tested component outputs yet. Anyone know how to enter setup on the Motorola STB DVR?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 58 Answers

If you are using hdmi out from your cable box It must be turned on in the system menu. The cable box can work on a regular tv, eg. component, cable, or composite video but still not send a signal out to HDMI unless switched on in the box's menu. I see this quite often and also in some cases you have to switch the box to send digital audio out through the HDMI cable. Hope this helps.

Posted on Apr 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung hp t5054 light comes on but it has no pic, sound and does not click when plugged in


Check that all cables are intact and plugged in correctly. (VGA, DVI, Antenna etc.) Did you place batteries correctly?
There might only be one button that turns the TV on/off (usually a red button in the top of the remote).

Jul 06, 2014 | Samsung HP-T5054 Widescreen 50 Plasma HDTV...

4 Answers

Jeep Liberty 2004 error code P0144


Code is "Oxygen sensor input voltage maintained above normal operating range"

Very likely it's the Lambda sensor on the eshaust playing up. Check connections and get it tested.

Can give up with faulty fuel from some pumps.

Jun 18, 2008 | 2004 Jeep Liberty

Tip

Input Switching issues Harmony Remote and Samsung TVs


The following 2008 Samsung TV’s have Anynet+:

LCD
All 9 Series LCD TVs (LNxxA950)
All 8 Series LCD TVs (LNxxA850, LNxxA860)
All 7 Series LCD TVs (LNxxA750)
Most of the 6 Series LCD TVs (LNxxA650, LNxxA630) excluding the 19” and 22” models
All of the 5 Series LCD TVs (LNxxA550, LNxxA540, LNxxA530)
Most of the 4 Series LCD TVs (LNxxA450) excluding the 19”, 22”, and 26” models

Plasma
All 7 Series Plasma TVs (PNxxA750, PNxxA760)
All 6 Series Plasma TVs (PNxxA650)
All 5 Series Plasma TVs (PNxxA550, PNxxA530)
Half of the 4 Series Plasma TVs (PNxxA450) excluding the 410 line (PNxxA410)

DLP
All 7 Series DLP TV’s (HLxxA750)
All 6 Series DLP TV’s (HLxxA650)
All 5 Series DLP TV’s (HLxxA510)

2007 Samsung TVs With Anynet+
The following 2007 Samsung TVs have Anynet+:

Note: Excluding all 26" models and below.

LCD
All 81F series (LN-Txx81F)
All 71F series (LN-Txx71F)
All 65F series (LN-Txx65F)
All 61F series (LN-Txx61F)
All 53H series (LN-Txx53H)

Plasma
FP-T5084
FP-T6374
HP-T4254
HP-T4264
HP-T5054
HP-T5064

DLP
All 89S series
HL-Txx89S
HL-T7288W

Information on Samsung TVs that support AnyNet has been refered to from: http://ars.samsung.com/customer/usa/jsp/faqs/faqs_view.jsp?isARS=Y&SITE_ID=1&AT_ID=18104&ARS_ID=8514159

How To Disable Samsung Anynet+ so your Harmony Remote Control properly controls your devices. This mainly impacts Input Switching.

1) Press your Tools Button.
2) Scroll down to Anynet and press your Select Button.
3) Once on the Anynet screen, please press your Left/Right Button(s) to select the Off Setting on the Anynet+ (HDMI-CEC)
4) Scroll down to the Auto Turn Off and select No.

Once this is completed, please turn off your TV and all device and power them back on using the Harmony Remote. Also please test this in the Activities mode, if this does not work, let me know

on Feb 10, 2010 | Logitech Harmony 520 LCD Remote Control

Tip

Input Switching Issues with Harmony and Samsung TV's


The following 2008 Samsung TV’s have Anynet+:

LCD
All 9 Series LCD TVs (LNxxA950)
All 8 Series LCD TVs (LNxxA850, LNxxA860)
All 7 Series LCD TVs (LNxxA750)
Most of the 6 Series LCD TVs (LNxxA650, LNxxA630) excluding the 19” and 22” models
All of the 5 Series LCD TVs (LNxxA550, LNxxA540, LNxxA530)
Most of the 4 Series LCD TVs (LNxxA450) excluding the 19”, 22”, and 26” models

Plasma
All 7 Series Plasma TVs (PNxxA750, PNxxA760)
All 6 Series Plasma TVs (PNxxA650)
All 5 Series Plasma TVs (PNxxA550, PNxxA530)
Half of the 4 Series Plasma TVs (PNxxA450) excluding the 410 line (PNxxA410)

DLP
All 7 Series DLP TV’s (HLxxA750)
All 6 Series DLP TV’s (HLxxA650)
All 5 Series DLP TV’s (HLxxA510)

2007 Samsung TVs With Anynet+
The following 2007 Samsung TVs have Anynet+:

Note: Excluding all 26" models and below.

LCD
All 81F series (LN-Txx81F)
All 71F series (LN-Txx71F)
All 65F series (LN-Txx65F)
All 61F series (LN-Txx61F)
All 53H series (LN-Txx53H)

Plasma
FP-T5084
FP-T6374
HP-T4254
HP-T4264
HP-T5054
HP-T5064

DLP
All 89S series
HL-Txx89S
HL-T7288W

Information on Samsung TVs that support AnyNet has been refered to from: http://ars.samsung.com/customer/usa/jsp/faqs/faqs_view.jsp?isARS=Y&SITE_ID=1&AT_ID=18104&ARS_ID=8514159

How To Disable Samsung Anynet+ so your Harmony Remote Control properly controls your devices. This mainly impacts Input Switching.

1) Press your Tools Button.
2) Scroll down to Anynet and press your Select Button.
3) Once on the Anynet screen, please press your Left/Right Button(s) to select the Off Setting on the Anynet+ (HDMI-CEC)
4) Scroll down to the Auto Turn Off and select No.

Once this is completed, please turn off your TV and all device and power them back on using the Harmony Remote. Also please test this in the Activities mode, if this does not work, please e-mail us back for further assistance.

on Feb 10, 2010 | Logitech Harmony 880 LCD Remote Control

1 Answer

Samsung black screen


probably a bad VX or VY card.

If your TV is under warranty... call samsung for solution

Oct 03, 2012 | Samsung HP-T5054 Widescreen 50 Plasma HDTV...

1 Answer

I own a 50" samsung plasma, model hp-t5054. Last


you have a defective module on your board,about 1x1 inch black have a technicien appraise only if the service is free

May 29, 2011 | Samsung FPT5084 50 in. Plasma HDTV

1 Answer

I experience some temporary image retension with my samsung hp-t5054. What is the best way to resolve this. What are the best settings for my TV?


HI.

This is a common problem with this Samsung TV.

Is this a new TV? If so, remember that it has a break-in period of about 100 hours or so. Not everyone believes in this, but in my experience it does have an effect.

Try reducing your contrast ratio to 35 (default is 50). You shouldn't see too much of a difference and it may solve your problem. And if it's a new TV, you could try setting it back to 50 again after the so-called 'break-in period'. Hope this helps.

Good luck,

-LL

Feb 23, 2010 | Samsung HPT5054 50 in. HD-Ready Plasma...

2 Answers

Video Game image is in Black and White in Samsung T220HD


Connected to "Y"? That is for the rgb cables for a high def connection method. You need to find the video in connection plug, usually yellow to get a color picture for the games. Hope this helps.

Mar 23, 2009 | Samsung T220HD LCD Monitor

2 Answers

Samsung lcd tv le40r8


if the unit is under warranty call samsung for the nearest authorized repair place. the problem is a bad main board.

Feb 24, 2008 | Samsung LE40R72BDX 40 in. HD-Ready LCD...

Not finding what you are looking for?
Samsung HP-R5072 50 in. Plasma HDTV Logo

Related Topics:

437 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73086 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...