Question about Toshiba 36A60 36" TV

2 Answers

No picture I turn the t.v. on and get no picture. Just a black screen and the red power on indicator blinks. Any ideas? Thanx, Mark

Posted by on

  • jacjav Apr 15, 2008

    blank screen,no sound,red on/power light flashes. we bought the tv in 2001.never had problems before except color not so good.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hitting will work for a while, but mine finally quit on me. Seems to be tied to the problem of the remote sensor not working also. Wish I knew what the real problem was?

Posted on Sep 02, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Fixed. As the saying goes, if it don't work, kick it. Well, I didn't kick it but I did shake it back and forth on the stand violently and viola', it works great now. I'm available for hire if you need my expertise.

Posted on Apr 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there. I'm finding that there's no picture and the red light flashes 15 times.


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Aug 12, 2015 | Standard (CRT) Televisions

1 Answer

L42wd2524x6 rca flat screen won't turn on, led flashes red 5 times


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

Apr 02, 2014 | Standard (CRT) Televisions

1 Answer

28pw8608


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating, to many popular brand TVs and other devices. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given.

Mar 22, 2014 | Philips 28PW8608 28" TV

1 Answer

Standby/timer flashes and screen goes black


How many times do this standby light flashes at one time switch ON? Count it. These flashes are fault indications. From the number of flashes, you can get an idea about which section circuit inside it is faulty. After confirming it, If you wish to get more details of these blinking codes, check this link.

Mar 02, 2013 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

Power surge-no picture or sound, just red blinking power light


Any malfunction associated with a blinking redlight usually indicates a circuit problem or defective component. Unfortunately, the days of taking off the back cover of your TV and replacing a defective tube or fuse are long gone. Proper servicing will require troubleshooting procedures that can only be performed by a qualified electronic repair facility or professional television repair person. Ask for an estimate and a realistic appraisal of whether the set can be adequately fixed. Depending on the age and condition of your TV it may not be cost effective to repair.

Sep 13, 2009 | Panasonic CT-36HL43 36" TV

2 Answers

SONY KDF-E55A20 5 red blinking lights on power button


Hi,
Symptom shows Lamp is weak in result and causing restart of TV again and again. Your TV requires new lamp as per following part number...
A1085447A* LAMP BLOCK ASSY XL-2200U
It is available in Sony Accessories Store for $200 and replacement procedure is written in instruction manual of TV.

Always buy Sony original lamp for TV and avoid aftermarket / cheap lamp for TV safety.

May 18, 2009 | Sony KV-36FV26 TV

1 Answer

Red standby light light blinking


The 5 blinks can indicate a picture tube starting to fail. Carefully open up the back and look for the flyback transformer. It will be the part with the large red wire coming out the top that goes to the side of the picture tube. There should be 2 controls on the flyback, screen and focus. Turn the screen control slightly clockwise. If the set stays on, the picture tube is starting to fail and you have bought yourself time to find a replacement. If that fails, then you will need to investigate other possibilities that will involve soldering. Let me know if you need to do that.

The 6 blinks indicate no horiszontal. This can be as simple as a couple of bad capacitors or the "jungle" IC. If you can solder, please post another question with the model and a brief description indicating that you can work in the set and we'll continue to track this down.

Thanks,
Dan

Dec 15, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

4 Answers

Sony trinitron


The standby light should be blinking in a pattern. Count,pause,count... Please post the count and that will indicate the circuit in which a problem was detected. That will allow me to give you details and possible solutions.

Thanks,
Dan

Oct 02, 2008 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

Sony kv35s66: No picture, just sound and red blinking


This should be a quick fix. Try resoldering the vertical IC. This is a small flat IC attached to a heat sink with about 11 pins. It should be marked LA7837 or something similar. That should resolve the problem.

Keep us posted.
Dan

Sep 08, 2008 | Standard (CRT) Televisions

1 Answer

No Picture


VERY common on this set, in fact we did three just last month...
Replace Fjl6920 - subs to 2sc5144 or NTE2661
Replace flyback Samsung P/N# AA26-00225A
Bill

Feb 09, 2008 | Samsung DynaFlat TX-P3064W 30" TV

Not finding what you are looking for?
Toshiba 36A60 36" TV Logo

318 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Standard (CRT) Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

 Elex
Elex

Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Are you a Toshiba Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...