Question about Electronics - Others
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I logged on to the April Aire website and found the wire diagram i needed.
they have really good information on all their units. thanks.sc.
Posted on Aug 19, 2008
Hey , just take the positive wire from the coil you are removing and feed it to the + terminal on the HEI dist. cap.the other terminal under there is for your tachometer. If you are mounting a master kill switch in the bumper for drag racing- attatch the kill wire to the tach terminal also.
Thats it you just plug the three wire pigtail from the dist. base(pickup) to the cap and you are off.
Remember firing order is 18436572 in a clockwise direction. to find #1 remove #1 plug and have someone"bump" the engine over while holding your finger over the hole-carefull. then line up the slotted mark on the crank pulley with the big notch on the timing indicator. Good luck
Posted on Aug 31, 2008
Intertherm does not offer a wiring diagram for the E1 series anymore. So I have included a link to the E2 series. They are very similar and you may find this service manual helpful for whatever problem you may be having.
Posted on Apr 11, 2009
Posted on Aug 14, 2009
Tips for a great answer:
Jul 16, 2014 | 2007 Jeep Grand Cherokee Overland
Jul 06, 2014 | General GEM 120 Mixer
Aug 22, 2013 | 1998 Chevrolet Tahoe
Aug 31, 2012 | Sewing Machines
Aug 08, 2012 | 2010 Dodge Grand Caravan
Sep 22, 2010 | 1997 Dodge Caravan
Mar 27, 2009 | 2002 Dodge Grand Caravan
Jul 02, 2008 | 2005 Dodge Caravan
89 people viewed this question
Usually answered in minutes!