Question about Kyocera RI-3530 Black and White Copier

1 Answer

Morning, Morning my copier machine is the type of kyocera mita km-1650 then if i switch on it gives me error of call service c6000Please can you help me?

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

A C6000 is as follows:

Broken fixing heater wire In fixing warm-up, the time to reach
50°C/122°F exceeds 13.5 s, the time to reach 100°C/212°F exceeds 10 s, the time to reach the primary stabilization
exceeds 10 s or the time to reach the secondary stabilization exceeds 24 s.

Solution:

Fixing heater M or S installed incorrectly.
Check and reinstall if necessary.

Broken fixing heater M or S wire.
Check for continuity. If none, replace the fixing heater M or S

The heating M or S are the hologen lamps inside the unit.

You can try to reset the fuser by entering the following
10871087 this will put you in maint mode.
163 then press start and you may have to press start again. If start doesn't work then you have to press ok.
then unplug unit and wait 30 secs. and turn back on.

Hope this helps.

Posted on Aug 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Km2035 error J00 kyocera mita


J00 is an unidentified jam. Means that a paper jammed in the machine and the user switched the machine off and then on again. So the machine lost the ability to inform the user where the jam is. As a result the user has to find out where the jammed paper or piece of paper is.

Jul 16, 2014 | Kyocera Mita Drum Cleaning Blade Km 1620...

2 Answers

0 Answers machine not working due to error C2000


https://www.tradebit.com/filedetail.php/126621326-kyocera-mita-km-1650-km-2050-service-repair-manual

May 21, 2014 | Copystar CS-1650 All-In-One Laser Printer

1 Answer

Morning, my copier machine is the type of kyocera mita km-1650 then if i switch on it gives me error of call service c6000,Please can you help me?


1650 machine is a medium size machine for small offices and home users. The machine is equipped with a self diagnostic function so it displays an error code whenever its processor detects a problem during copy process.
Some codes can be reset by simply opening and closing the front door or by turning the machin on and off, but there are some others that can be reset only by a service representative. C 6000 code is one of them. There are several causes that lead to this problem, i;e:
1. Unstable power source
2. Low volatage
3. Broken thermisted wire
4. Poor contact in the thermister connector terminals.
5. Heater lamps are broken or not installed correctly.
Here is the process to reset c 6000.
Enter 1087-1087 (1087 twice) from the keypad.
U000 will be displayed.
Enter 163 by using the keypad keys.
Press "Start" (the green button) twice.
The code will be reset and machine will start automatically.
If this code is appeared again, you may need to check the fusing section of the machine and it shoud be done only by a service engineer.

Mar 23, 2010 | Kyocera RI-3530 Black and White Copier

2 Answers

SYSTEM ERROR


error 610 machine kyocera km-3035 ????

Nov 05, 2008 | Kyocera Mita KM-3035 All-In-One Laser...

2 Answers

Kyocera Mita KM 1505 copier machine


Hello Sir,
I would like to ask you that I have a kyocera mita copier KM1505 and displays the code error like C610,So try to help me in order to resolve or fixe that problem.
Thanks
Pascal NIYONSENGA
Rwanda-KIGALI

Apr 03, 2008 | Office Equipment & Supplies

3 Answers

Copier giving error


Defective Optical Laser Unit or main board. Is it making noise?
If so, it is the laser unit.
And that is more likely than the main board.

Sep 06, 2007 | Kyocera Mita KM-3035 All-In-One Laser...

Not finding what you are looking for?
Kyocera RI-3530 Black and White Copier Logo

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Kyocera HP Expert

Level 3 Expert

523 Answers

Chris Schutte

Level 2 Expert

51 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...