Question about DVD & Blu-Ray Players

1 Answer

Lost remote. I cannot change the DVD/VCR to view cable.

Posted by on

  • djbudde Mar 30, 2008

    Didn't work. I'm hoping that there's a way to manually change the input source from the menu screens. I haven't found it yet.

  • boxocrap Feb 23, 2009

    I have bought a universal remote BUT it wont let me program new channels let alone see the menu does any one know how to program it mannually

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Try getting a universal remote that is compatible with your unit

Posted on Mar 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost remote & manual


You may view/download the manual here. I don't see a replacement for the original remote, but you should be able to program a universal remote to work with the unit.

Jan 21, 2013 | Symphonic WF803 DVD Player/VCR

1 Answer

I unplugged my Sanyo DVW 7000 DVD/VCR 4 head Hi-Fi system for about a half hour, while we were moving furniture. When I plugged it back in I couldn't get it to work. I can turn it on manually and get the...


Hi,
I am not sure if you unplugged all the cables from your VCR to your TV, If so double check the hook up. When you unplugged the POWER to the VCR the memory was lost. Try and find the menu or set up on the remote. Again the audio out from the VCR needs to be hooked to the audio in on the TV and the video out from the VCR needs to be hooked up to the video in on the TV. Keep trying !!!

Jul 28, 2010 | Sanyo DVW-7000 DVD Player/VCR

2 Answers

Need remote code for DVD player


From my searches I don't think you will find it. Try going to http://www.sony.ca/view/cic_contact.htm and asking them directly for it. I can't see them saying no.

Sep 11, 2009 | Sony SLV-D360P DVD Player/VCR

1 Answer

Lost remote for esa vcr/dvd combo and need code for univeral remote


i have an esa dvd/vcr and lost the remote and i bought a rca remote and it didnt have the code and the ge remote i got wouldn't work.

Jun 16, 2009 | Toshiba SD-V394 DVD Player/VCR

1 Answer

Sony vx-515 - I put it on DVD-1 using the remote and cannot chang


Remote control has mode select switch, set it on DVD-1 to control Recorder with remote.

Jun 11, 2009 | Sony RDR-VX515 DVD Recorder/VCR

1 Answer

I need playback channel for tv to be ch.4 -


Solution 1

How to set the DVD Recorder+VCR’s RF output channel
Turn off the DVD Recorder+VCR, then press and hold
CH (v/V) on the front panel for about five
seconds to change the RF output channel (CH 03 or
CH 04). “RF 03” or “RF 04” appears on the front panel display.

Solution 2

Cable Service With Cable Box
If a cable box is required in your cable system, follow the
instructions shown below. This hookup permits both TV and
DVD Recorder+VCR operation.
To view or record a CATV channel:
1 Tune the TV to the correct video input channel.
2 Set the DVD Recorder+VCR to the output channel of the
cable box using the CH (v / V) or the 0-9 keys on your DVD
Recorder+VCR (e.g., CH3).
3 Select the channel you wish to view on the cable box.


Please rate this a fixya

Jan 30, 2009 | GoVideo Go Video DVD/VCR Combo

1 Answer

LOST INSTRUCTIONS HOW TO HOOK UP MY DVD & VCR PLAYER TO MY TV SONY?


Sony maintains most manuals on their website. The general principle is to hook the cables from the video and audio OUT of the DVD/VCR player to the video and audio IN of the TV. Once the cables are hooked up correctly, just press the input, source, av, or video button on the tv or tv remote to change the television to the correct channel so that you can watch videos.

Jun 14, 2008 | Philips DVD & Blu-Ray Players

1 Answer

VCR/DVD player DVP3340V/17


Are you using the cable connectors to go into the VCR, and then from the VCR to the TV?

If so, turn the VCR on. Put the TV on channel 3 or 4 (depending on which one you have it set to. If you are unsure, try both channels one at a time) Press the VCR/DVD button so the display on the VCR says VCR (not DVD). Now, you should be able to change the channel with your VCR remote control. If not, you have a problem with your cables. Make sure your cable from the wall goes to RF IN on your VCR. The RF Out on the VCR should go to your TV ANT In or TV RF In.

If you have successfully gotten your TV to display the TV station shown on the front of your VCR, then all you have to do is put in a tape, select the channel you want to record and press the record button.

If you want to watch another channel while you're recording, press the TV/VCR button on the VCR remote, then use your TV remote to change channels.

When you want to stop recording, press the stop button, put the TV back onto channel 3 or 4 (depending on what you have it set to) and press the TV/VCR button on your VCR again. From here you can rewind and view your recording.

Jan 18, 2008 | Toshiba SD-V394 DVD Player/VCR

1 Answer

Simultaneously Recording and viewing different TV programs


Just leave the vcr on the channel u wanna record! and press TV/VCR on the remote, (only if it's over the air) antenna, not cable or satelite! you would need 2 boxes for that!

Oct 13, 2007 | Samsung DVD-V4600 DVD Player/VCR

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96372 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...