Question about Hitachi 50V500 50 in. HD-Ready LCD Television

1 Answer

Vertical red line on 55 hitachi plazma

I have a 2yr old plasma with very little use and when i turn it on for the first ten minutes it's crystal clear. Once it's warm it develops a red vertical about 12 inches long. I've shut down viewing for fear of burn in. Is this fixable? It seems like it would be because the first ten minutes it looks great. If you can let me know what my options are I would be very appreciative.

I have a problem. When the TV is on randomly red lines will fill the screen. spaced around an inch apart. they will appear and disappear.
It is more annoying then a bad problem.

Help plz?

Posted by on

  • BrendonS Mar 30, 2008

    I have a problem. When the TV is on randomly red lines will
    fill the screen. spaced around an inch apart. they will appear and
    disappear.

    It is more annoying then a bad problem.



    Help plz?

    -- that was my original post. Discard the top.

  • lewfer Apr 26, 2009

    So what is does repair of this bad buffer (panel drivers) involve?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 453 Answers

U have a bad buffer ( panel drivers)

Posted on May 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lg55lv4400-va 55" flatscreen tv ( not a plazma) has developed a wide flickering vertical flickering stripe down the screen. Has been fine . Goes away once in a while. An Ideas what is wrong ?


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Nov 03, 2014 | Televison & Video

1 Answer

Have red vertical lines in center of screen from top to bottom


iam also facing same problum,that problum wont start immedietly,when we r watching after 1 hr it will start

Oct 21, 2012 | Hitachi 42HDS69 42 in. Plasma Television

3 Answers

Vertical lines on screen


1. Frist on the BURN MODE.
2. Check whether same
Vertical lines on screen ?? 3. If yes ..?
4. Then change the LOGIC BOARD or PDP

Jan 11, 2009 | Hitachi 42HDS69 42 in. Plasma Television

1 Answer

Hitachi 42" Plasma HDTV


This happened to me with my first Hitachi 55" plasma. It ended up being the panel itself, which was very expensive to fix. Thankfully mine was under warranty and I was able to get a replacement TV.

Jun 16, 2008 | Hitachi 55HDS69 55 in. Plasma Television

1 Answer

Red box half way down screen


I am getting re or blue lines running vertically on my Tv. They are not there all the time just now and then. Can I fix it with my remote or do I need a tech?

Jun 16, 2008 | Hitachi 55HDS69 55 in. Plasma Television

1 Answer

Red vertical Line on 55" Hitachi plasma


check the MAIN -Y- SUSTAIN BOARD i believe that your problem is there


good luck

caypianan@yahoo.com

Mar 16, 2008 | Hitachi 55HDM71 55 in. HD-Ready Plasma...

1 Answer

Vertical red line on 55 hitachi plazma


The vertical line, in my case, was due to a bad contact on the flexible printed circuit. I fixed the problem by using a piece of a rubber eraser to apply downward pressure on the flexible circuit as shown in the picture. To locate the faulty section lightly push on the flexible circuit from lef to right untill the line dissapears.
a7dc1d0.jpg

Nov 28, 2007 | Hitachi 55HDM71 55 in. HD-Ready Plasma...

1 Answer

Black vetical line


It's either x-main or logic board... Take it to a qualified shop and I think you'll be impressed... Most of these are repaired at module level now and it makes the repair relatively inexpensive.
Bill

Nov 19, 2007 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

5 Answers

My tv is hitachi 55pd plasma


have a tech check your tv the vertical module needs to be replaced.good luck

Apr 18, 2007 | Hitachi 55HDT51 55 in. HD-Ready Plasma...

2 Answers

Vertical, pencil-thin blue line appears after 10 minutes of viewing (any source)


I would suspect a connection breaking down as the set heats up. A shop will probably have to put the set in a stand to hold it while they check for loose connections or defective components inside. Not a DIY job by any means. If this line went completely through the picture either vertically or horizontally and stayed there then this would have indicated a failure in the Panel itself. A thin Line any where on the screen consisting of one pixel in width is a Panel Failure according to Hitachi.

Jan 01, 2007 | Hitachi 55HDT51 55 in. HD-Ready Plasma...

Not finding what you are looking for?
Hitachi 50V500 50 in. HD-Ready LCD Television Logo

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69654 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...