Question about Epson Stylus DX6050 All-In-One InkJet Printer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The link above will show you how it is done. Please rate me on this response. Thanks!
Posted on Mar 26, 2009
that guide shows how to change the cartridges and no you dont have to wait untill they have run out to change the cartridges
Posted on May 15, 2009
Read printer manual for detail of status E-02. Turn on printer, imediatelly unplug power chord while carriage moving. Unplug USB. Move carriage by hand to replacement position.
Posted on Sep 15, 2009
Usually when this happens the printer fails to goes through
the motions of the printing process, kind of stands still with indicator lights
just blinking away. This could be as a result of either of these scenarios.
i. Ink cartridge has developed incompatibility or is incompatible
The Solution is to try an older/another cartridge (doesn’t matter if ink is finished. You must replace cartridge one at a time). If lights stop blinking it confirms that your cartridge has become incompatible or developed incompatibility. Also if your printer is the type that can work with only one cartridge, remove one after the other (closing back the lid/cover) to determine which in the set (black or color) has become incompatible. At the instance the incompatible one is removed and you close the lid, the blinking will stop (for printers that can print with one ink cartridge only). Just replace the incompatible one and start printing again. In most cases the issue is always with one cartridge. But if both are affected, you have to replace both. Because of this type of problem, always keep used cartridges somewhere safe; they come in handy for this type of troubleshooting.
ii. The Cartridge electronic panel is dirty
The electronic panel on the cartridge that makes contact with the cartridge carrier inside the printer is dirty and needs cleaning. This electronic panel is front part of the cartridge with copper “dots”.
The Solution is to try to clean this panel with a piece of folded tissue paper soaked in a bit of methylated spirit. Also try to clean the area in the cartridge carrier/holder that makes contact with the cartridge’s electronic panel (Usually this is more difficult). If you cannot reach it with your fingers, use a stick or something with tissue wrapped around it. Allow to dry well and return the cartridges, close the cover. The blinking should stop if the electronic panel is the issue. Once the blinking stops the printer will print.
Posted on Mar 24, 2010
Dead easy if you follow these instructions:
Click on "Start" and select "Control Panel"
From Control Panel, select "Printers & Faxes"
Right Click on "Epson"
Select "Printing Preferences"
Select "Ink Cartridge Replacement"
The cartridges will now be easy to remove and just follow remaining instructions on screen.
Posted on May 10, 2010
Tips for a great answer:
Jan 02, 2013 | Epson Stylus DX6050 All-In-One InkJet...
Jan 21, 2011 | Epson Stylus DX6050 All-In-One InkJet...
Sep 21, 2010 | Epson Stylus DX6050 All-In-One InkJet...
Nov 03, 2009 | Epson Stylus DX6050 All-In-One InkJet...
Jul 13, 2009 | Epson Stylus DX6050 All-In-One InkJet...
Jun 03, 2009 | Epson Stylus DX6050 All-In-One InkJet...
Mar 04, 2009 | Epson Stylus Multifunction Inkjet Printer/...
Jan 23, 2009 | Epson Stylus DX6050 All-In-One InkJet...
Aug 29, 2007 | Epson Stylus Photo R300 InkJet Printer
77 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: