Question about Televison & Video

1 Answer

46 sam dlp problem

Nov 2004 bought a 46 dlp .the issue I have is it turns on picture is still bright.It shuts off after 2 min 10 min 30 sec it varies.sometimes it stays on(rarley).alson middle bottom looks like the pic is brighter in darker situations.sometimes when it shuts down i will have blinking lights in front 20% of the time it shuts down and thats it.

please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,568 Answers

This is pure conjecture but I think the cooling fan has failed or is running slow.
Check to see if it can still be heard.

This system seems to be a bit weak on reliability.

Posted on Mar 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a viore 46 dlp


check your cooling fan. if the fan is not working or to dirty the light housing will build to much heat and the unit will shut itself down .

Nov 09, 2009 | Televison & Video

1 Answer

Hl-s4266w samsung no picture or sound timer flashes and then shut


replace Both of your STK ICs they are big black ics will have part number on them CK 2 resisitors 2.7ohms sometimes they will be bad also they are in same circuit as STKs STK394-020 040s call Mats for parts 1-800-628-1118

Sep 21, 2009 | Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

Samsung ldp 46 " replaced lamp humming sound fans cleaned and working set continues to turn off every 20 min or so


Humming problem with a Samsung DLP HL-P5063W
picture displays good
Humming randomly starts, but once it starts it hums

May 31, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

DLP HDTV shut off, sound but no picture


replace light bulb,
if you are hearing a click like the stove is because the lamp balast is trying to power on the lamp,
if you need part number and vendor please send me the model number

Apr 18, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

2 Answers

HL-S5687 DLp tv


your keeping a part that is warming up and shuts down your shutdown that protects the tv from burning up... cooler... to find this you might need a hair dryer or a can of freeze mist.
I believe the left side is your high-voltage section.
you can also let it warm-up without the fan .. let it shut down and feel parts with set unplugged to see what is running hot.

Oct 22, 2008 | Samsung DLP HL-P4663W 46" Rear Projection...

2 Answers

56" samsung dlp hlp5663wx/xaa


sorry Im so late. do not replace bulbs if u just had a nice clear bright picture!!!! stress this!!
indicator lights blinking "scream help I am shut down" normally due due to a short...and worse possible is the high voltage went bad, 2nd the power supply itself drooped a voltage or shorted.

good luck ..... I wish I was there to check it out with just an ohm meter.

Jun 16, 2008 | Samsung DLP HL-P5663W 56" TV

4 Answers

46 sam dlp problem


It sounds like an overheating problem.

Jun 09, 2008 | Televison & Video

2 Answers

PROBLEM WITH SAMSUNG DLP TV


It could be the temp sensor going bad. This sensor sits on top of the metal housing which the bulb assembly slides into. The bulb assembly will have a hole on top and this is where the sensor is above. There is a small blue and white wire that plugs into it. If you pull the wire out and put a paper clip or wire in the coupling you will basically bypass the sensor connecting the blue and white wire. If your tv turns on then that is your problem. Its cheap too. Here were my symptoms..1] Turn tv on 2] Bulb would light up..(which eliminates the ballast) regular picture would show up (which eliminates the bulb and color wheel) 3] 30 seconds later tv would shut down with 3 flashing lights. After bypass the tv turned on as always and hasnt shut down yet. Always un plug tv first. Get the replacement part to avoid overheating and possible fire

Apr 07, 2008 | Samsung DLP HL-P4663W 46" Rear Projection...

1 Answer

No Action from a HLN467W


I would wait to see if it happens again.

Feb 26, 2008 | Samsung HLN467W 46" Rear Projection HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...