Question about Panasonic SC-HT940 System
Unit will not do anything. Getting error code f750. What is this error code?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Panasonic SA-HT940
F61 is a problem with the output amplifier pac. It is the equivalent of "protect" mode. The output pac needs to be replaced. I'll look up the part number for you.
Posted on May 15, 2008
You can purchase it here:
Hope this helps,
Posted on Mar 03, 2010
Tips for a great answer:
It is possible that the amplifier had encountered a fault with a higher current drain which had triggered it to a protection fault condition. The fault can be with your output drivers. Please check for short on the outputs fitted for both the channels. Use a meter after disconnecting to check for short in the drivers. Disconnect the positive and negative voltages to the output and see if the protect changes. Even a fault in the preamp stages that drives in high current into the output can shut the Amplifier. Sometimes this can be a noise which can be a HUM or HISS before the protect works. Faulty capacitors in these circuits also can cause similar issues and needs close observation.You need to confirm and replace the specific stages or outputs. If not there can be issues in the mother board. Maybe the protect circuit by itself is shutting off due to a faulty bias or there is a leak in any voltage/current sensing circuit. Also disconnect the speakers and test, if the amplifier comes out of the protect mode then check for short on the speakers.
Dec 23, 2011 | Panasonic Audio Players & Recorders
Feb 18, 2011 | Panasonic sa-ht930 Home Theater Audio...
Jan 18, 2011 | Panasonic sa-ht930 Home Theater Audio...
Jan 15, 2011 | Panasonic sa-ht930 Home Theater Audio...
Sep 22, 2010 | Panasonic SC-HT940 System
Mar 03, 2010 | Panasonic SC-HT940 System
Jun 22, 2009 | Panasonic sa-ht930 Home Theater Audio...
Nov 12, 2013 | Panasonic SC-HT940 System
98 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: