Question about Icon Image 17.5 S Treadmill

1 Answer

I was on my trendmill today and I when I was going to turn off the trendmill I reliazed I forgot to turn of the incline. So naturally I turned it back on and pressed the incine button to go down and now all it does it go up and down up and down and it won't stop at all. What do I do to stop it?

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Icon Master
  • 832 Answers

Calibration of incline Motor
Press the Stop and the Speed Up keys down while inserting the safety key. For key sequence instructions to enter calibration.
Press the Stop key one time. The Time window should read EP:2P. Some newer models may also say FP, Pass, or the like. This means that it passes the EPROM test. Press either incline key and the incline will calibrate automatically. THIS IS A VERY IMPORTANT STEP BECAUSE YOU WILL GET AN ERROR MESSAGE IF THIS STEP IS SKIPPED. After completing calibration of incline, press the Stop key and then remove the safety key.

Posted on May 18, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My treadclimber is stuck on a high incline?


This is the nature of the treadclimber, the decks are inclined until you step on them. In use they should drop with your footfalls to absorb the impact, then rise back up as your foot nears the rear of each treadle. If you would like more travel as you walk turn the dials on the shocks to a higher setting, for less travel turn to a lower setting.

Sep 10, 2012 | Bowflex TC1000 Treadclimber

1 Answer

My treadmill belt doesn't move at all


Contact the seller for help or send it back if it's only a month old, it must be under warranty.

Jan 25, 2012 | FreeMotion Exercise & Fitness

1 Answer

The treadmill is stuck on "incline." Any time we put the red key on it to turn it on, it just keeps moving up and down from 0 incline to 10. It does this over and over again without stopping. No...


I can't solve this, but my Nordic Track T5 zi occasionally does the same thing. The previous two times, I waited until the unit "bottomed out", and then pulled the mag switch (key) off. I unplugged the unit, then plugged it back in, attached the key, and all was well. This worked twice before, but today (3/8/2011)the unit's incline is cycling again, and the old fix isn't working. Maybe it will need to go back to Sears! Unit was purchased in October of 2010. Frustrating.

Jan 30, 2011 | Nordic Track NordicTrack T5 zi Treadmill

1 Answer

I have a pro-form 550 XL treadmill its in #10 deg. incline and wont come down. The motor keeps running trying to incline more and wont shut down or lower the incline. Reset it talked to sears rep. and they...


i ran into the same problem today with another proform model. i shut the machine off and lifted the platform to the stow position and brought it back down, turned it on. it worked fine during a workout. i was using an ifit sd card when it got stuck. were you? just wondering.

Feb 03, 2010 | Exercise & Fitness

1 Answer

My play station won't read or reliaze any disk


This can be caused by a dirty laser in the drive. Try cleaning the laser withe a q-tip and alcohol. If this does not fix the problem, the laser may need to be replaced. Contact Sony and see if the unit is still under warranty with this site: https://service1.us.playstation.com/rma.htm?_flowExecutionKey=_cBB963E55-EB14-B132-4004-8EC0B0021F26_kFEDF8151-1595-A6FC-DCB0-2B10AAD93EBA

If the unit is not under warranty go to www.wiredextreme.com. We are a console repair company based in Texas, and we can get your console up and running again. All our repairs come with a 90 day warranty that covers the whole console not just what we repair. We also offer extended warranties up to 4 years at additional cost. If you have any other questions/concerns feel free to email support@wiredextreme.com or call 214-222-5788.

Jan 12, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Hello I have a Nordic Track A2050 treadmill and it has worked flawlessly till today, The unit was open (unfolded) and I wanted to close it because I nearly killed myself tripping over it, so I turned it on...


Hello there, The machine is attempting to do an incline calibration. Keep the unit lowered as you have it, reinstall the safety key, allow the unit to go all the way to the top and then all the way to the bottom. The machine will stop when at the bottom and the screen will go back to normal. The machine will not overtravel the incline motor and damage it. Just let the calibration finish the procedure and you will be fine.
Good Luck! Tim
FYI this will happen anytime the safety key is removed while the incline is moving on nordictrack brand machines.

Jan 11, 2010 | Nordic Track NordicTrack Treadmill, A2550

3 Answers

Ifit treadmill will not incline but everything else works, how do I fix the incline


You may need to calibrate the incline. Do this with the following procedure.
Safety key out
press the stop and speed up buttons at the same time while inserting the safety key. (you are now in diagnostics)
press the stop button one time only.
now press the incline up button (incline motor should start moving up)
incline will go up to the top and then all the way to the bottom. when it gets done you can remove the key. Reinsert the key and you should be operating normally.
Good luck Tim

Nov 23, 2009 | Proform Quick Burn Pro Treadmill with 12...

1 Answer

Millivolt pool heater will not ignite


Most heaters do not require power for the pilot to remain lit. Is there power at he unit? If it worked yesterday and not today has anyone turned it off at the circuit breaker? If you have power turn the gas valve off for 10 minuets and then relight to see if it needed a reset.

May 23, 2009 | Teledyne Laars Laars Lite 2 Pool Heater...

Not finding what you are looking for?
Icon Image 17.5 S Treadmill Logo

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Icon Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Alienware X51
Alienware X51

Level 1 Expert

12 Answers

Are you an Icon Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...