Question about Dmm Vision Fitness T9500 Treadmill

1 Answer

No start no stop of my teadmill t9600 but the other buttons areok

All the button on the consol of my t9600 are ok (light and sound) except these three buttons: start stop and select. I push on these buttons and there aren't action and no sound like the other butons. Is it an electronic problem or an other problem ? Thank you for your response. Marc

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Dmm Master
  • 832 Answers

These are the most often used functions you just worn them out you can call vision fitness they will ask the upper console model and serial # (located on the back end of the console ) Here is their # 1-800-335-4348

Posted on May 18, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
bwinton
  • 83 Answers

SOURCE: no start no stop of my teadmill t9600 but the other buttons areok

The buttons on this unit are on an overlay. Basically, the buttons are a big sticker that goes on the console. I would start by checking the connection between the overlay and the console board. If the connections in good, then try a new overlay. If that does not work then the console board is bad.

Posted on Mar 24, 2010

Testimonial: "It was the connection between the overlay and the console board. It was disconnected. Thank you very much !!! Marc"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer will not run or complete a diagnostic.


1. The washing machine needs to be plugged in and in stand by mode with all indicators off.
2. Choose any one button on the washer's console except Power, Start, or Stop. Press/Hold 3 Seconds - Release 3 Seconds - Press/Hold 3 Seconds - Release 3 Seconds - Press/Hold 3 Seconds.
3. If the diagnostic test mode has been successfully entered, all of the indicator lights will glow for five seconds with 88 on the time display. (If it didn't work try #2 again One one thousand...Two one thousand...Three one thousand)
4. If there are any saved fault codes they will be displayed. If there are no save fault codes all indicator lights will turn off for a moment then back on with 88 displayed and the automatic diagnostic test mode will begin in five seconds.
5. If you are unable to enter the diagnostic test mode, press the power button and verify that the button you were trying to use operates properly to program the washer's cycle function. There may be something wrong with that function button. Find another button on the control that appears to work and try to enter the diagnostic mode with that button. You may also want to verify that the user interface has a good connection to the washing machine control board at the P11 terminal.
Back to Top
Note: Pressing the STOP or POWER button at any time to exit the washing machine's diagnostic mode.

Mar 14, 2015 | Kenmore Washing Machines

1 Answer

I turn on my ps3 and the green light comes on for a short time and the it beeps three times shuts off and the green light turns red and starts to flash. If I push the power button again the red Light


you need to change your power box there is a bad connection with the wires. its over heating you might whant to buy another at game stop or take it in to get fixed. the more you messed with it it might mess up your whole system.

Aug 18, 2012 | Sony Playstation 3 (PS3) Console

1 Answer

When I turn on the treadmill, the top console lights up, but the bottom half of the console won't work except for 2 buttons. The START button will start the treadmill at 1 mph (stop will not...


First of all you need a Surge protector, you can get one from Nordictrack.com, it is on sale. Secondly, unplug the treadmill and leave it unplugged for at least 24 hours. Before you plug it back again, make sure you already have a surge protector on your outlet. Also make sure Trreadmill is the only load on this circuit. Plug it and try again. I had the same problem, and mine works this way. Some times, with dilrty power, the bit get set and the bottons stop working. Good Luck!

Jan 02, 2011 | Nordic Track NordicTrack Treadmill, A2550

2 Answers

No start no stop of my teadmill t9600 but the other buttons areok


The buttons on this unit are on an overlay. Basically, the buttons are a big sticker that goes on the console. I would start by checking the connection between the overlay and the console board. If the connections in good, then try a new overlay. If that does not work then the console board is bad.

Mar 22, 2010 | Dmm Vision Fitness T9500 Treadmill

2 Answers

Just updated xbox 360 and now all i get is the xbox 360 screen


try unpluging the power cable from the xbox and the wall then take off your harddrive for 30 secs reattach everything hold down the sync button on the xbox2_bing.gif and while holding that down press the power button, release the sync button after 30secs or until you boot up to the avatar, if this dont work check what colour light is on your power brick when you press the power button on? hope this helps?

Jan 27, 2010 | Microsoft Xbox 360 Console

1 Answer

I have a kenmore Oasis that powers up but wont start


Activate the Console and Indicators Diagnostic Test Mode to check the functionality of the .

Console and Indicators Diagnostic Test Mode Activation
  1. While in standby mode, press the following button sequence within four seconds: SOIL LEVEL>WASH RINSE TEMP>SOIL LEVEL>WASH RINSE TEMP
  2. Press the START button within five seconds of "dt" showing on the display. All indicators should turn on and "88" is displayed.
  3. Press START again. The two-digit display and the status indicators turn off while all other indicators remain lit.
  4. Press START again. The two-digit display and the status indicators turn on while all other indicators remain lit.
  5. Rotate the WASH CYCLE selector back and forth. The indicators will switch on an off.
  6. Press the buttons to check the function. The indicators will switch on or off and a beeping sound will be heard when a button is pressed.
  7. Press STOP or POWER button to exit diagnostic test mode.
  8. If no indicators light up or if no beeping sound is heard when a button is pressed or if some buttons do not light up indicators when pressed, check the user interface board and its connection to the main/control board.
  • Unplug the machine.
  • Remove the three screws on the back of the console.
  • Lift the console off the cabinet.
  • The control board is located on the right side of the console viewed from the front of the machine. Disconnect the middle wiring harness connector on the right side of the control board near the pressure transducer hose.
  • Clean the connector thoroughly to ensure a good connection.
  • Reinstall the console and reconnect power.
  • Run the diagnostic test once again.
  • Replace the user interface board if it fails the test once more.
Refer to the next post if no problem is found on the user interface.

Jan 26, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Dryer does not start up when the start button is pressed. It makes a click like a relay is closing but no power to the drum motor, or electric heat. unit interior lights up, and controls light up. When...


Your belt is likely broken. Pop the top (held down by spring clips) to inspect. If you see it - try to lift it. If you can not lift it it is ok. If not ok, remove the front cover for complete access to the drive.

Dec 29, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

My xbox 360 won't start. I press the start button and you can here the fan start and and it sounds fine, then the fan goes really fast and then stops, and its turns off. the lights on the front don't turn...


If you do not have a green light on duringthis malfuction ether the scart cable is not pluged in all the way or your system hard drive malfuctioned and thus did not boot the dashboard. I would call microsoft for a warrenty replacment at this point , Thanks

Jul 30, 2009 | Microsoft Xbox 360 Console

1 Answer

No Controller, No USB, No Quadrant


ok so its an internal problem with the system. if you have warranty findout if they will fix.

Apr 26, 2009 | Microsoft Xbox 360 Console

Not finding what you are looking for?
Dmm Vision Fitness T9500 Treadmill Logo

Related Topics:

309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dmm Exercise & Fitness Experts

fretlessbass
fretlessbass

Level 1 Expert

21 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Techmotionusa.com
Techmotionusa.com

Level 2 Expert

163 Answers

Are you a Dmm Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...