Question about InFocus SC-MOTGRY-106H MOTORIZED SCREEN

1 Answer

When the TV is swith on,the clicking like noise and the red indicator blinks continuesly.

The TV set is TCL 2136 brand,it make a noise when turned on and the red indicator blinks continuesly only,I opened the set and hear that the FLY-BACK is making that noise. I haven't check the set fully yet. Why the FLY-BACK is making noise and the one MZ73 becomes very hot. Thanks for your time

Posted by on

  • Thapab Sep 11, 2008

    Thank you very much for your help

  • xman888 Dec 17, 2008

    When the TV is switched on there;s a clicking noise inside and red LED infront blinks non stop. The black MZ73 becomes very hot too.



×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Fly-back has a leak im sure with that.try to check the flyback for blue colored current that goes out from it. this causes the noise, if it has then you can use a sealant to seal the leak

Posted on Sep 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

5 blinks on a TU-PT700U panasonic plasma tv means what?


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Sep 18, 2016 | Panasonic TU-PT700U DTV Receiver

1 Answer

Panasonic Viera TH-L32X30M . TV now start when switched on red flashes three times and repeating again and again.


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" or "Magazine" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

Aug 08, 2014 | TV Receivers & DVRs

1 Answer

Have a mitsubishi model 73640 and the power light turns on makes some noise thens turns off by it self.


The red indicator merely shows power is getting to the set. Probably the power supply has failed.

Jul 17, 2014 | TV Receivers & DVRs

1 Answer

What are the universal remote codes for a phillips magnavox tv ts 2546 c121


Hello
Three digit universal remote codes for Philips Magnavox are:
183/ 184/ 208/ 213
Four digit codes are:
0062 0204 0207 0183 0226 0288
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search
OK.

Jul 27, 2011 | Philips TV Receivers & DVRs

1 Answer

Lost 4 digit code for Technika 1stba08 freeview box


Hello
Four digit universal remote codes for Technica are
0031 0004 0005 0009 0051 0053 0105 0109 0170 0000 0174 0001 0008 0012 0042 0058
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

May 26, 2011 | TV Receivers & DVRs

1 Answer

No remote have universal remote what are codes for magnavox sdtv


Hello
You haven't specified details about your Magnavox. There is Philips Magnavox and Magnavox. Anyway I'll give you codes for both Philips magnavox and Magnavox.

MAGNAVOX CODES
Three digit universal remote codes are
004/ 008/ 009/ 062/ 068/ 069/ 074/ 075/ 076/ 077/ 089/ 133/ 163/ 165
Four digit universal remote codes are
0062 0004 0009 0456 0183 0226 0288 0008 0068 0075 0141

PHILIPS MAGNAVOX
Three digit codes are
183/ 184/ 208/ 213
Four digit codes are
0062 0204 0207 0183 0226 0288
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.


Mar 03, 2011 | TV Receivers & DVRs

1 Answer

How do I get the passcode to reset a samsung tv


Hello

Do the following steps first, and find whether you could unlock your TV or not. If can't, follow the rest.
Steps To Unlock A Samsung TV 1. Turn the power off.
2. On the remote, press Mute followed by 1, 8, 2, Power in sequence.
3. You should now see the service menu. To exit the Service Menu always select RESET.



Three digit universal remote code for Samsung are:-

004/ 005/ 009/ 015/ 104/ 105/ 106/ 109/ 133/ 172

Four Digit Universal remote code for Samsung are:-

0105 0077 0076 0109 0007 0009 0004 0005 0085 0172 0942 0358 0012 0015 0080 0104 0106

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

Nov 20, 2010 | Samsung TV Receivers & DVRs

1 Answer

After turning on the tv the green light comes on then it clicks back to blinking red after a few seconds


Issue with Logic Board Fail to innitial Voltage Safety Control Swich due to fails component inside TV Set... Please Refer To Certified TV Shop Repair ...

Oct 09, 2010 | Philips E-Box FTR9965 DTV Receiver

1 Answer

Red light flashes on power switch, but no picture or sound on tv


tv will not power on. red light on switch blinks. power relay clicks, but no picture or sound.

Jul 28, 2009 | Toshiba DVD Recorder AND Series2 TiVo...

1 Answer

Sharp LCD can't turn on


Bummer, one month out of warranty. This is why I always recomend keeping expensive, high tech stuff under warranty.
First thing to do is buy and download the service manual from servicemanual.net and find out what the fail code of 1 blink means.

Dec 31, 2007 | TV Receivers & DVRs

Not finding what you are looking for?
InFocus SC-MOTGRY-106H MOTORIZED SCREEN Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus TV Receivers & DVRs Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you an InFocus TV Receiver and DVR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...