Question about Reebok T 1280 Treadmill

1 Answer

How to make the base lock in place. - Reebok T 1280 Treadmill

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Reebok Master
  • 832 Answers

Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45lbs. (20 kg) to raise, lower, or move the treadmill.Raise the frame until the latch knob locks into the storage
position. Make sure that the latch knob is locked in the storage position.

Posted on May 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cleaned my filter and forgot how to put it back on, how?


Hi there! To return the air director back into the dirt cup, rotate 1/4 turn clockwise to lock into place. To replace the pleated filter. Return filter cartridge to base of cleaner. Click button on filter cover back into place to lock filter cartridge in base of cleaner. Hope this helps! I have also included a link to the instruction manual for reference if needed. Thanks! http://dirtdevil.com/file/956/

May 20, 2014 | Dirt Devil Easy Lite Quick Vacuum

1 Answer

Car seat base is still wobbly after installed in the car. We don't have specific instructions for it. Can you email directions for the proper installation?


Good Day!

Here are two videos that will simply shows the proper way to install it.




and


http://www.ehow.com/video_4440636_use-infant-car-seat-bases.html





Here are some tips for added protections on your car seats

  • Many times this type of car seat comes with a base that a carrier latches into. This actually makes installation easier because you are dealing with a rather small piece of plastic. The base and carrier should only go in the back seat, preferably in the middle, although this is not a hard-and-fast rule.

  • You might need to place a shortened swimming noodle (one of the only materials CPS has certified) to level out the base, which should lie at a 45-degree angle with the carrier installed. Some manufacturers make bases that are adjustable.

  • Make sure the carrier straps are tight and the harness clip is even with the baby's shoulders or armpits. Also make sure the straps are in the slot that lines up just above or closest to the infant's shoulders.

  • If the child is still a bit wobbly in the seat due to her size, place rolled receiving blankets or towels along each side. This provides additional support and cushion. However, do not place anything under the harness straps.

  • When the carrier is snapped into the base, the handle should be out of the way. Place it in the down position.

  • Some older vehicles (especially those manufactured prior to 1997) may require the use of a locking clip. This is a small piece of metal that looks like the letter "I" on its side. Certain vehicles do not have seat belts that lock when the brakes are slammed. The clip locks the seat belt and prevents extra slippage in the event of an accident.

Aug 28, 2011 | Toys

1 Answer

I washed my daughters graco car seat and now i havent a clue of how to put it back together and i need re assemble it fast please help


Proper installation of a car seat is imperative to protectan infant. Accidents do happen and assuring that the instructions forinstallation of the Graco Infant Restraint/Carrier are followed will increasethe chances of preventing injury or death as a result of an accident. Graco carseats are a popular choice among parents due the availability of products atcommon retail stores, affordability and user-friendly baby gear.Graco Car SeatInstallation
Step 1
Plan to secure the infant seat facing the rear inthe middle of the back seat. If a center position is not available, positionthe seat directly behind the driver's side seat. For safety reasons, therestraint should not be placed in a position where there is an air bag. Ensurethat the proper vehicle lap belt system is in place; manually adjusted lapbelts, automatic locking retractor lap belts and lap/shoulder belts withlocking latch plates are all considered safe for use with the Graco InfantCarrier/Restraint.Step 2
Remove the carrier from the Graco car seat baseby squeezing the lever at the rear of the restraint and lifting the seat up.Place the base in the vehicle facing the rear. Thread the vehicle shoulder andlap belts through openings at the end of the base without twisting the belts.Secure the belts by placing plastic tongue over the belts. Tighten the vehiclebelts by pushing down on the base and pulling out any slack.Step 3Install locking clip to secure shoulder and lapbelt together just above the seat belt buckle. Connect the two belts with thelocking clip. Buckle the lap belt system and tighten by pulling out any slack.Ensure that car seat base is secure by pulling and pushing on it; the baseshould not move sideways, forward or backward.Step 4
Place the Graco carrier in the base. Push down onthe restraint until it clicks and locks into the base. Set the infant in therestraint for travel and place harness straps over the baby's shoulders. Clickthe chest place together over the sternum and lock the buckles into placebetween the legs.Tipsand Warnings
  • Contact local police departments, hospitals and fire departments to inquire about child car seat safety checks
  • Graco Infant Restraint/Carrier will not protect against serious injury or death if not installed properly. Always read the Graco owner's manual that comes with product prior to attempting installation and travel with an infant.

Jul 19, 2011 | Home

3 Answers

How do I change the filter on Sunbeam Model SCM 2412 humidifier?


Turn the unit off and disconnect from the electrical
outlet.
2. Remove the tank from the housing.
3. Unlock the housing from the base by turning the lock
knob to the unlocked position.
4. Lift the housing straight up and place to the side.
5. Unlock the wick holder from the base by turning the lock
knob to the unlocked position.
6. Remove the wicks from the wick holder.
7. Follow the weekly cleaning instructions.
8. Insert new filters into the wick holder and lock the wick
holder back onto the base.
9. Replace the housing onto the base and lock it into place.
10. Fill the tank and place back into housing.
11. Repeat Operating Instructions.
It will take about 30 minutes for the humidifier to reach

Nov 03, 2010 | Sunbeam (0013871361) Humidifier

1 Answer

When i try using it, nothing happens. i cannot


Remove the work bowl, blades, etc from off the base.
Plug the processor in and press the ON pedal down.
Use a pen to press in the rubber button on top of the base - you should hear a sound.
Now reassemble the bowl - lock the bowl in so that the handle faces front; insert blade of choice; place the tab under the feed tube of lid slightly left of center of the work bowl handle and slide the lid counter-clockwise until it clicks into place; insert pusher and make sure it locks into place.
You should be good to go again.

Sep 30, 2009 | Cuisinart Food Processors

1 Answer

Installation of base into car


Place the base into the car ,pull seatbelt through the large holes on the base, lock seatbelt and place the infant carseat in you should hear the seat click into the lock position. Hope this helps.

Jul 08, 2009 | Evenflo Journey Elite - Pink Lemonade...

1 Answer

Locking the jar on the base Oster Fusion 600W Blender


Here is the user manual for the Oster Fusion:
http://www.osterfusion.com/Manuals/MANUALS/BRLY07-Z00-000_43_29190737.PDF

It looks like you line up the threads, place the base on, and twist to tighten.

-Tha Mp3 Doctor

Mar 19, 2009 | Oster Blenders

1 Answer

Single wheel will not lock into place


The first thing I would suggest would be to make sure the black knob above the front wheel is not pushed in but popped up. Secondly, I would try to clean the front wheel fork and inside the base. This is a routine procedure to upkeep the stroller. All you need to do is wipe down the short metal stick that locks into the base of the stroller and inside the base itself and then put some Vaseline around the short metal stick and inside the base. Hopefully, that should do the trick.

Feb 01, 2009 | Valco Rebel Jogger

1 Answer

Bonaire BCM-645


To replace the filter, follow the steps below
1. Turn the unit off and disconnect from the electrical outlet.
2. Remove the reservoir from the housing.
3. Unlock the housing from the base by turning the lock
knob to the unlocked position
4. Lift the housing straight up and place to the side
5. Unlock the wick holder from the base by turning the
lock knob to the unlocked position
6. Remove the wicks from the wick holder
7. Follow the weekly cleaning instructions.
8. Insert new filters into the wick holder and lock the wick
holder back onto the base.
9. Replace the housing onto the base and lock it into
place.
10.Fill the reservoir and place back into housing.
11.Repeat Operating Instructions It will take about 30 minutes
for the humidifier to reach maximum output. You
can purchase replacement filters (model BWF100 filters)
at your local retailer, by calling 1-800-253-2764, filling
out the accessory card, or by visiting
www.bionaire.com. It is recommended that a
replacement filter is purchased for uninterrupted use.

Here is a link for the manual for your humidifier:
http://www.appliancefactoryparts.com/content/pdfs/117223.pdf

Good Luck.

Apr 24, 2008 | Crane Frog EE-3191 1 Gallon Humidifier

3 Answers

Shield reattachment


Well, I don't have a solution to getting it back on, but if you could tell me how to get the stupid thing off, I could maybe figure out how to get it back on for you. :) I can't find anything about it via Cosco either. grrrrr!

Aug 08, 2006 | Cosco Alpha Omega 22-180 - with Shield

Not finding what you are looking for?
Reebok T 1280 Treadmill Logo

Related Topics:

446 people viewed this question

Ask a Question

Usually answered in minutes!

Top Reebok Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Reebok Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...