Question about D-Link AirPlus DI-524 Wireless Router

1 Answer

Drops connection there are no lights flashing at 3 & 4 but we have flashing lights at status, wan wilan 1 & 2 but not 3 & 4. Is this a problem why i have dropped connections? can this be fixed or is the unit losing its strength?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,768 Answers

1. Your router may have lost the IP address from the ISP (Internet Service Provider)
2. go into the router using the 192.168.0.1 IP address to check the status of the router. This will tell you if you have lost connection with the service provider.
3. Call your ISP to verify connectivity. There may have been a line interruption.
4. check with the router manufacturer for router firmware updates.
5. If your router is older it may be at what is call "end- of - life" and may longer be serviceable by the manufacturer.
6. You also may want to try moving the router to a spot away from electronic devices such as TV'S, cell phone, cordless phone bases, and microwave ovens. These device send signal that are on the same frequency as the router and may have an affect on your connectivty. This also may account for connectivity drops.

Posted on May 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Belkin N150 Rouer. My internet is Time warner. It has no connection between the modern and Belkin router. How can I set up Belkin N150 Router to solve this problem?


f the modem light keeps blinking, it means that the router hasn't been configured yet. Also, rarely, it can be an issue with WAN port/modem port on the router or the ethernet cable connecting the modem to router or finally, modem may not be working as its not applicable in this case(as you said).

1.Connect comp.--(gray port) router (yellow port)--modem
2.On the computer, open the router page by typing 192.168.2.1 in the address bar of browser

NOTE : IF YOUR INTERNET SERVICE PROVIDER IS CABLE FOLLOW THE BELOW STEPS

3.Under Internet WAN , SELECT the connection type as Dynamic.->NEXT
4.On the far left column, click on "MAC address" under Internet WAN.
5.Click on clone and apply changes and finally check Internet status
6.If internet status > Not connected, we need to do a network power cycle
7.For this, unplug the power from router, then from modem, then unplug the coaxial cable from cable modem.
8. Wait for 60 sec, then connect the coaxial cable, then connect power to modem, wait for lights on modem to get steady, then finally, plug in the power to router.
Now, you may see proper lights lit on the router.
All my best wishes for a fast internet service through the router.

FOR PPPOE OR DSL CONNECTIONS
1.Under Internet WAN , SELECT the connection type as PPPOE ->NEXT
2.ENTER THE USERNAME & PASSWORD PROVIDED BY YOUR IN INTERNET SERVICE PROVIDER
3.CLICK ON APPLY CHANGES



For any advanced help, revert asap!
Thanks and regards,
MILAN

Jan 20, 2011 | Belkin Connect N150 Wireless Router...

2 Answers

I have a Belkin N wireless router, model F5D8236-4 v1. I am unable to connect to the internet using the router and I've even tried resetting the router with no luck. The "modem" light on the...


i have a belkin N wireless router model:F5D8236-4 v1 i have had it installed on my computer but it has since been wiped so there is no trace of me having it installed, since this i have moved home and ost the disk that came with it but i need to put the router back on due to my daughter having a laptop, how would i get the software for it if i have no disk?? please help!!!!!!!!!!!

Jan 07, 2011 | Belkin (F5D7231-4) Wireless Router

2 Answers

Flashing amber modem light on belking n wireless router


Actually there is no problem with the Modem
First Get the following Information from your ISP

1 ) The Connection Type
2 ) If it is PPPoE then Get the user name and Password

Step 1 : Connect Modem - Router - Computer (Wired)

Step 2 : Open RSP By typing 192.168.2.1 on the Address Bar of the internet explorer

Step 3 : On the Left Side Under Internet WAN Click
Connection type

Step 4 : Leave the Password Blank and click Submit

Step 5 : Select the connection type as given by the ISP

Step 6 : Click Next

Step 7 : Type Username And Password for PPPoE ,Click Apply Changes

Step 8 : There is no need to type Any Host Name for dynamic Click Apply Changes

Step 9 : If it is A Cable connection then

Step 10 : On the left side Under Internet WAN Click MAC Address

Step 11 : Click Clone

Step 12 : Click Apply Changes

Step 13 : Restart the Router

Step 14 : Check the Internet Status



Jan 11, 2010 | Belkin Wireless-N Wireless Router with...

1 Answer

My modem light is started flashing on my router when i reset it


Connect Modem - Router - Main Computer

Step 1 :Open RSP by typing 192.168.2.1

Step 2 : On the Left hand side Underneath Internet WAN Click MAC Address

Step 3 : Leave the Password blank and click Submit

Step 4 : Click Clone and click Apply Changes

Check the Internet Status on the Top Right Side

If it is connected Then It Worked

Jan 07, 2010 | Belkin (F5D5231-4) Router

1 Answer

My laptop can't find a connection to m router.


Step 1 : Connect modem - Router - Computer ( Wired )
Step 2 : Open router setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left side under internet WAN click Connection Type
Step 4 : leave the Password Blank and click submit
Step 5 : Choose the connection type as dynamic and click next
Step 6 : Leave the Host name blank and click apply
Step 7 : On the left Under Internet WAN Click MAC Address
Step 8 : Click Clone and Click Apply changes
Step 9 : If the Internet status on the top right is connected
Step 10 : Then check if you have internet
Step 11 : if not Then unplug the Power Cable from the Modem And the Router
Step 12 : Plug the power Cord to the Modem
Step 13 : Wait till all the lights are on
Step 14 : Plug the power to the belkin
Step 15 : Check the color of the light in the belkin
Step 16 :If green then Check if you have internet
If not working then call belkin

Dec 29, 2009 | Belkin (F6D3230-4) Router (F6D32304)

1 Answer

Armstrong upflow,unit works intermittent problem,call for heat nothing happens,error code of 5 blinks then 6 blinks. i have no manuel, and the panels dont have the codes on them. anyone have access to the...


Armstrong

FAILURE CODES

LED Status Fault Description
Off
No Power to the System Control

Steady Flash (11 or more flashes with no pause)
Normal Operation (Standby or call for heat)

2 Flashes
Pressure Switch Closed When It Should Be Open

3 Flashes
Pressure Switch Stuck Open 30 Seconds or Longer After Call for Heat (System in 5-minute delay mode before next call for heat). On/off switch in "off" position during a call for heat will generate this code.

4 Flashes
Open Limit Switch or Limit Switch Circuit

5 Flashes
Flame Sense Signal Sensed Out of Proper Sequence

6 Flashes - pause - 1 Flash (see Note 1)*
Soft Lockout Type 1 (Failure to light within 4 trials for ignition)

6 Flashes - pause - 2 Flashes (see Notes 1 & 2)*
Soft Lockout Type 2 (Flame sense lost during run)

6 Flashes - pause - 3 Flashes (see Notes 1 & 2)*
Soft Lockout Type 3 (Pressure switch opened during run)

6 Flashes - pause - 4 Flashes (see Notes 1 & 2)*
Soft Lockout Type 4 (Limit or limit circuit opened during run)

6 Flashes - pause - 5 Flashes (see Note 1)*
Soft Lockout Type 5 (Flame has gone away after Error Code 5)

6 Flashes - pause - 7 Flashes (see Note 1)*
Soft Lockout Type 7 (Self-check failure)

10 Flashes* - SV9520H8034 only
Line Input Voltage Polarity Reversed

Dec 12, 2009 | Coleman Heating & Cooling

1 Answer

Signal found, but no connectivity


Try this. It should renew your configuration between your router and your internet provider:

Step 1 Log into the web-based configuration by typing in the IP address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing).

Note: The 192.168.0.1 address is NOT on the internet. It is the address to the router itself.

Step 2 Click the Home tab and click the WAN button. Dynamic IP Address is the default value, however, if Dynamic IP Address is not selected as the WAN type, select Dynamic IP Address by clicking on the radio button. Click Clone Mac Address. Click on Apply and then Continue to save the changes.

Step 3 Click on Status. Under WAN, Click DHCP Renew. If it does not get an IP address or times out, then continue with Step 4.

Step 4 Power cycle the cable modem and router:

Turn the cable modem off (first)
Turn the router off
Leave them off for 2 minutes**
Turn the cable modem on (first)
Wait until you get a solid cable light on the cable modem
Turn the router on
Wait 30 seconds

** If you have a Motorola (Surf Board) modem, leave off for at least 5 minutes.

Step 5 Follow Step 1 again and log back into the web configuration. Click the Status tab and click the Device Info button. If you do not already have a public IP address under the WAN heading, click on the DHCP Renew and Continue buttons.
If you're still getting no connection to the internet, another alternative (before chucking the router) would be to reset it to factory defaults, and run through the setup process again, from scratch.

Cheers

Nov 06, 2008 | D-Link AirPlus DI-524 Wireless Router

1 Answer

DGL-4300 resets every few seconds


Try the following:
1. Hook up your router like you want it to be
2. After the WAN/Wireless lights turn off we want to HARDRESET your router.
3. There will be a small hole that requires a pen or paper clip to press...Hold this down for about 15 seconds, or untill the power light flashes on your router.

This might take care of it.

let me know.

Jan 10, 2008 | D-Link GamerLounge DGL-4300 Router...

Not finding what you are looking for?
D-Link AirPlus DI-524 Wireless Router Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...