Question about Whirlpool Cabrio WTW6600SBT Top Load Washer

1 Answer

Code F1 Appears

While washing the machine stops & F1 appears on the dial

Posted by on

  • Anonymous Mar 31, 2014

    A Faultcode F1 appears and the machine does not start.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

It is the RPS sensor, cover by whirlpool. Get your model number and serial number ready and call the 800 number on the machine, tell them you heard it here that it is a recall so you don't get the run around. The sensor is located on the stater motor and comes with a new harness and cost you nothing.

Posted on May 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F1 error appears just right after I turned the machine.. I had to stop and tstart 3-4 times before it gets on to cycle. Then at 23 minutes F! error error comes back and I had to do the same thing (stop and...


The F1 error code means that the computer thinks a button on the touchpad is stuck. Sometimes this can be resolved by making sure the touchpad connector fits tight into the control board. The F1 code can be cleared by pushing CANCEL/OFF. If it returns the touchpad needs to be replaced .

Aug 28, 2011 | Kenmore Washing Machines

1 Answer

F1 code appears after starting and now during the wash


You need a new main control board. F1 means that the board cannot sense water in the machine. You may want to call your manufacturer to see if the board was recalled. They were having alot of problems with that error code and recalled control boards on some washers

Jul 12, 2011 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

My washer beeps and says "F1", I press STOP and START. "F1" appears again and I press STOP and START and then works. WHat does this mean?


Hi,


The "F1" error code on the Whirlpool cabrio is quite common, and generally has to do with the control board. Replacing the control panel may resolve this issue. However, I believe Whirlpool is aware of the F1 issue with the Cabrio, and is fixing some machines for free. Please call 1-800-253-1301 for more details and see if you are eligible for a free repair.


Thank you !!

Aug 16, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

Washer starts to fill then stops /now warsher wont wash


I too was having the same problem and I almost paid to have it repaired, which would have cost a few hundred dollars, thanfully I called the recall line after reading some of the other post on here and my machine was elgible for a upgraded on the control panel so didn' t cost anything for us. Sears told us that the F1 code is a miscommunication in the control panel, basically the machine is confused and don't know what to do so it stops and gives that code. Hope it helps!

Jun 19, 2010 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

When the cycle starts F1 appears on the dial,


Here is a link to the service repair sheet at Whirpool for the F1 error code on your machine. You will find 4 things to check at the bottom of the page. Good luck.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/d12cd4888abce86285256a42005ea985/1a4cb9c9ab426640852574e90050e40f/$FILE/8178767.pdf

Jun 01, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

When the cycle starts F1 appears on the dial,


call mfg. i heard they are fixing this problem even washer is out of warranty. to solve this problem your washer need new control board.

May 20, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

The machine flashes f1


Hello madelinezak
Welcome


F1

“F##” code
Press PAUSE/CANCEL once to clear code. Press START. If
code appears again, call for service.


Thank you, Huuum
Please remember to leave a rating

Oct 12, 2008 | Whirlpool Washing Machines

Not finding what you are looking for?
Whirlpool Cabrio WTW6600SBT Top Load Washer Logo

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...